Sealey AP22513BB.V3 User manual

13 DRAWER TOPCHEST & ROLLCAB
COMBINATION WITH BALL-BEARING SLIDES -
RED/GREY
MODEL NO: AP22513BB.V3
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this Topchest
& Rollcab combination.
9Locate the Topchest & Rollcab combination in a suitable working area.
9Keep the work area clean, uncluttered and ensure there is adequate lighting.
9Keep the Topchest & Rollcab combination clean and tidy in accordance with good workshop practice.
9Keep children and unauthorised persons away from the working area.
8DO NOT use the Topchest & Rollcab combination for any purpose other than that for which it is designed.
8DO NOT move the Topchest & Rollcab combination with drawers open.
8DO NOT open more than one drawer at the same time.
8DO NOT step on the drawers.
8DO NOT use in damp work areas.
WARNING! The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions and situations
that may occur. It must be understood that common sense and caution are factors which cannot be built into this product, but must be applied
by the operator.
2. INTRODUCTION
The economical way to buy American PRO® Ball-Bearing quality tool chests. Supplied packed one inside the other. This combo has smooth
25mm ball-bearing slides and all the features of the professional chests except that the swivel castors are Ø100mm. Features locks on both
the topchest and rollcab, with removable steel bar on the rollcab and integral bars on the topchest. Supplied with two keys for each lock.
3. SPECIFICATION
Model No:........................................................... AP22513.V3
Wx D x H:
9 Drawer Topchest :
Overall Size:............................................600 x 260 x 380mm
Small Split Drawer (x6): ............................150 x 220 x 35mm
Small Drawer (x2): ....................................510 x 220 x 35mm
Medium Drawer (x1):.................................510 x 220 x 80mm
4. ASSEMBLY
4.1.  Removenuts,boltsandwashersfrombasethenliftoffbody,g.1.
4.2.  Removebase,g.2andreattachg.3.
AP22513BB.V3 Issue:1 11/01/22
Original Language Version
© Jack Sealey Limited
4 Drawer Rollcab:
Overall Size:............................................615 x 330 x 935mm
Small Drawer (x2): ....................................515 x 305 x 45mm
Medium Drawer (x2):.................................515 x 305 x 80mm
Cupboard (x1): ........................................610 x 295 x 425mm

4.3.  Fitcastors,gs4and5.
4.4.  Fitchestsidehandleswithbolts,g.6.
4.5.  Attachsidehandleontocabinetandsecurewithfourboltsandwashers,seeg.6.
5. MAINTENANCE
5.1. Periodically lubricate castors and tighten all hardware.
5.2. Clean the surfaces with a soft cloth and a mild water/detergent solution.
Original Language Version
© Jack Sealey Limited AP22513BB.V3 Issue:1 11/01/22
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on [e-mail] or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.