Sealey VS0204B.V2 User manual

BRAKE & CLUTCH BLEEDER CAP SET
MODEL NO: VS0204B.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURYAND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Item Part no. Description Applications Internal dia. Type
20 VS0204.V4-20 ADAPTOR CAP ‘1’ Chrysler, Jeep 43.5 Bayonet
21 VS0204.V4-21 ADAPTOR CAP ‘2’ Chysler, Jeep (Blanking cap) 43.5 Bayonet
22 VS0204.V4-22 ADAPTOR CAP ‘3’ GM, Chevrolet, Hummer, Mazda 49.5 Bayonet
23 VS0204.V4-23 ADAPTOR CAP ‘3’
90° ELBOW Ford Fiesta 2011 onwards 49.5 Bayonet
24 VS820SA ADAPTOR CAP ‘6’ Most European manufacturers 45 Thread
25 VS0204.V4-25 ADAPTOR CAP ‘7’ Universal N/A Rubber cone 30-55mm
26 VS0204.V4-26 ADAPTOR CAP’8’ Universal N/A Rubber cone
27 VS0204.V4-27 ADAPTOR CAP ‘9’ Honda 56 Bayonet
28 VS0204.V4-28 ADAPTOR CAP ‘10’ Nissan 34.5 Bayonet
29 VS0204.V4-36 ADAPTOR CAP ‘41’ Ford Mondeo 2014 onwards,
Ford Fiesta 2016 onwards,
Mazda CX3/CX5
49.5 Bayonet
30 VS0204.V4-30 ADAPTOR CAP ‘19’ Chysler, Hyundai, Mitsubishi,
Nissan, Subaru 50.7 Bayonet
31 VS0204.V4-31 ADAPTOR CAP ‘21’
90° ELBOW Toyota, Lexus 46.5
32 VS0204.V4-32 ADAPTORS (c/w
TUBES)
33 VS0204.V4-33 CLAMP ASSEMBLY
34 VS0204.V4-34 HOOK BOLT
35 VS0204.V4-35 CHAIN
VS0204B.V2 Issue 2 11/08/23
Original Language Version
© Jack Sealey Limited

VS0204B.V2 Issue 2 11/08/23
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be
sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When
the product becomes completely unserviceable and requires disposal, drain any uids (if applicable) into approved
containers and dispose of the product and uids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call our
technical team on [e-mail] or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.