Sealite SL-C510-AIS Supplement

SL-C510 With AIS
Compact 5-9NM Solar Marine Lantern
V1-4
INSTALLATION & SERVICE MANUAL

2
Version No. Description Date Author Approved
1.0 Manual Launch June 2019 J.Ohle / M.Nicholson M.Nicholson
1.1 Update AIS Battery images August 2019 M.Dutka M.Nicholson
1.2 Lantern Data Update July 2020 M.Dutka M.Nicholson
1.3 Update to AIS programming procedure November 2020 M.Dutka M.Nicholson
1.4 Grounding advice February 2021 M.Dutka M.Nicholsond

SL-C510-AIS
Compact 5-9NM Solar Marine Lantern
Latest products and information available at www.sealite.com 3
Table of Contents
Introduction ......................................................................................................................... Page 4
Operating Principle ............................................................................................................ Page 4
Technology .......................................................................................................................... Page 4
SL-C510 with AIS Model .................................................................................................... Page 5
Installation ........................................................................................................................... Page 6
Viewing Lantern Settings ................................................................................................. Page 8
Summary of Lantern Status .......................................................................................... Page 9
Programming the Lantern ................................................................................................ Page 10
SealitePro®Bluetooth Guide ........................................................................................... Page 10
SealitePro®Bluetooth Controller Functions ................................................................... Page 10
Accessing the SealitePro®App for the first time ......................................................... Page 11
SealitePro®Password Reset Procedure ........................................................................ Page 13
Lantern Status ................................................................................................................. Page 14
Solar Calculations ............................................................................................................ Page 15
Programming Options .................................................................................................... Page 17
Manufacturing Data ........................................................................................................... Page 23
SealitePro®Troubleshooting ............................................................................................ Page 26
Optional IR Remote Control ............................................................................................. Page 28
GPS Synchronisation ........................................................................................................ Page 35
Lantern Status .................................................................................................................... Page 36
Lantern Thermal Management ....................................................................................... Page 37
Lantern Data .................................................................................................................... Page 37
Thermal Limit Operation ................................................................................................. Page 38
AIS Programming .............................................................................................................. Page 39
AIS Configuration - Message 21 and Message 6 .......................................................... Page 59
Appendix ............................................................................................................................. Page 68
Flash Codes .................................................................................................................... Page 69
Maintenance & Servicing ................................................................................................. Page 75
Trouble Shooting ............................................................................................................... Page 79
Sealite LED Light Warranty ............................................................................................. Page 79

4
Introduction
Congratulations! By choosing to purchase a Sealite lantern you have become the owner of one of
the most advanced LED marine lanterns in the world.
Sealite Pty Ltd has been manufacturing lanterns for over 25 years, and particular care has been taken
to ensure your lantern gives years of service.
As a commitment to producing the highest quality products for our customers, Sealite has been
independently certified as complying with the requirements of ISO9001:2015 quality management
system. Sealite lanterns comply with requirements of the US Coast Guard in 33 CFR part 66 for Private
Aids to Navigation.
By taking a few moments to browse through this booklet, you will become familiar with the versatility
of your lantern, and be able to maximise its operating function.
Operating Principle
The solar module of the lantern converts sunlight to an electrical current that is used to charge the
battery. The battery provides power to operate the lantern at night.
The flasher unit has very low current requirements. A microprocessor drives multiple ultra-bright LED’s
(Light Emitting Diodes) through a DC/DC converter, which enables the LED’s to operate within the
manufacturer’s specifications. The battery is protected from over-charging within the circuit to ensure
maximum battery life.
On darkness, the microprocessor will initiate a program check and after approximately 1 minute begin
flashing to the set Flash Code.
Technology
Sealite is the world’s fastest growing manufacturer of marine aids to navigation. We employ leading
mechanical, optical, hardware & software engineers to create innovative products to service the
needs of our customers worldwide and offer the widest range of solar-powered LED lanterns in the
marketplace.
Electronics
Sealite employs leading in-house electronic engineers in the design and development of software and
related circuitry. All individual electronic components are sourced directly by Sealite procurement staff
ensuring that only the highest quality components are used in our products.
LED Technology
All marine lanterns use the latest advancements in LED technology as a light source. The major
advantage of LED’s over traditional light sources is well established in that they typically have an
operational life in excess of 100,000 hours, resulting in substantial savings to maintenance and
servicing costs.
Precision Construction
Commitment to investing in the design and construction of injection-moulded parts including optic
lenses, light bases and a range of other components ensures that all Sealite products are of consistent
and superior quality.
Optical Performance
Sealite manufactures a range of marine LED lenses moulded from multi-cavity dies. The company has
superior in-house lens manufacturing capabilities to support outstanding optical performance.
Award-winning, Patented Technology
Several United States and Australian patent registrations are held on Sealite’s range of innovative
designs, with other regional patents pending in Canada, United Kingdom and Europe.

SL-C510-AIS
Compact 5-9NM Solar Marine Lantern
Latest products and information available at www.sealite.com 5
SL-C510 With AIS
Compact 5-9NM Solar Marine Lantern
The SL-C510 with AIS is a robust, completely self-contained 5-9NM Solar LED Lantern specifically
designed to withstand the tough marine environment to provide years of reliable, low maintenance
service. The 3 & 4 hole bolt pattern base fits directly onto existing 200mm bolt pattern industry
standard mounts for ease of installation.
The four (4) premium-grade solar modules are integrated into the assembly, and mounted to collect
sunlight at all angles. The SL-C510 with AIS has a large power supply consisting of four 8.4-watt panels
(33.6 watt total) making this model perfect for use in lower sunlight areas or where more demanding
duty cycles are required.
The base and top of the lanterns are made from composite moulded polymer with UV-stabilised
rubber corners and gaskets providing a superior IP68 – the best in the industry. A handle is
incorporated into the chassis for safe lifting.
The tough, polycarbonate lens is specifically designed for use with LEDs and incorporates an
environment-friendly spike to deter unwelcome bird life. The lens design also ensures that vessel
operators clearly see the light from above when passing the AtoN. The design incorporates
a conveniently located OLED (Organic Light-Emitting Diode) screen with touchpad allowing
maintenance personnel to check the diagnostics of the lantern with the touch of a button.
Completely programmable via the new Bluetooth®connected SealitePro®mobile application, the
SL-C510 with AIS can be configured and monitored from a distance up to 50 metres. An in-built
solar calculator confirms the lanterns ability to operate at the set location, ensuring optimal operating
performance.
The SL-C510 with AIS is available with GPS Synchronisation as standard. Two (2) or more lights can be
synchronised to flash in unison via an internal GPS module.
The SL-C510 with AIS is backed by Sealite’s industry leading 3-year warranty.
OLED Display for Lantern
Status check
LED Optic
Robust composite
moulded base and top
with handle, Aluminium
chassis with rubber
extruded corners
3 & 4 hole 200mm bolt pattern
base for ease of installation
Internal 24Ah Battery
4 x monocrystalline solar modules,
ensuring maximum light collection
to charge the battery

6
The following components come as standard with each lantern:
• SL-LA510 lantern
• SL-S2A2 510 Chassis
• Quick Start Guide
• USB Programming Cable
• USB Memory Stick
Optional
• IR programmer remote
These components are securely packaged within protective wrap in a carton and shipped to you.
Please check that ALL of these components are included with your order and contact your
Sealite representative as soon as possible if anything is missing.
Product Components
Installation
Your SL-C510 with AIS is supplied with an internal ON/OFF switch. In the OFF position (as supplied),
power is removed from both the AIS module and the lantern. The internal solar charging circuitry will
continue to operate normally.
Charging the Battery
New lanterns should be left in the sun with the internal switch in the OFF position for 1-2 days to
ensure battery is charged. Alternatively, the external charge port can be used to charge the battery
(charger sold separately). Ensure battery voltage is >13V before placing into service.
Preferred Installation Location
For best lantern performance, ensure solar modules are not covered or in the shade and are in clear
view of the sky will result in optimum charging results. A clear GPS signal strength is required.
For location suitability use the Sealite Online Solar Calculator and ensure
‘extra charge’ all year round.
Note: The SL-C510-AIS must be grounded via the grounding post at
the base of the chassis. Failure to do so will void your warranty.
The AIS should be programmed whilst the unit is in the OFF position.
Please refer to the AIS section of this manual for programming.
Lantern Installations Settings
The lantern can be programmed via 2 methods,
1. Bluetooth connectivity via the SealitePro®App (recommended);
2. Via the optional Sealite IR Controller (optional);
The SealitePro®and Sealite IR Controller Instructions are included
in this manual. On/Off Switch

SL-C510-AIS
Compact 5-9NM Solar Marine Lantern
Latest products and information available at www.sealite.com 7
68
660
593
557
Ø234
201
120°
Slot 12.6 x 21.75
6 Locations
Lantern Operation
The lantern is activated by switching the internal ON/OFF
switch. Flash Codes and Intensity settings need to be set via the
SealitePro®App or the Sealite IR Controller.
1. Remove the four socket-head screws on the top of the lens
assembly and lift the SL-C510 with AIS (light head) assembly
from the solar chassis. Ensure minimal disturbance or
movement of the internal wiring.
2. Switch internal ON/OFF switch to ON.
3. Carefully place the light head assembly back onto the chassis
ensuring the O-ring is properly placed.
4. Replace the four (4) socket head screws. Sealite recommends that the light head be tightened
onto the solar chassis base using a general purpose “grip tool”, similar in shape to a screwdriver,
however with the appropriate hex key head fitted.
To achieve a satisfactory seal, it is recommended that a torque of 3Nm is applied to the bolts used
for holding down the Light Head to the Solar Base and that only the supplied bolts are used.
Applying a higher torque setting is not recommended and may void warranty. If in doubt, please
contact your local Sealite representative.
5. To test, place a dark cover (towel or jacket) on top of the light to activate sensor. The light will
come on within thirty seconds.
6. The unit should be bolted to an even, flat surface.
7. Ensure that the earth stud is connected to ground.

8
The SL-C510 with AIS models are equipped with a very low power consumption OLED display,
providing a quick and easy lantern status and diagnostic checks by maintenance staff.
To activate the OLED display simply touch the indicated location. Once activated, the OLED will display
in sequence the following information:
• Product Version
• Product Model
• Lantern Operational Mode
• Lantern Flash Character
• Lantern Intensity
• Battery Voltage
• Lantern Status
• Lantern Hibernation Status and settings
• Lantern last accessed date
The OLED system will continue to display the lantern settings/status in a sequential manner unless
the Touch Pad is activated for a second time, this action will allow the OLED display to stop on the
information showing at the Touch Action. To visualise the remaining information simply “Tap” the Pad
again then the system will display the next set of information.
When the Touch Pad device is inactive for more than three minutes the OLED display will enter in
sleep mode and can only display the lantern settings/status if the Pad device is activated again.
NOTE – The OLED display and Touch Pad components are designed to provide lantern settings/status
readings only, the lantern programming can be achieved by one of the Sealite lantern programming
methods, the information is available in this product manual.
Viewing Lantern Settings

SL-C510-AIS
Compact 5-9NM Solar Marine Lantern
Latest products and information available at www.sealite.com 9
Summary of Lantern Status
The following summary indicates the data that can be visualised on the Lantern OLED Display.
Display Description
Displays the manufacture revision number
Indicates the lantern current operation mode:
Standby - The lantern is configured in a minimum current state;
Always on – The daylight sensor is disabled and lantern set to operate day/night time;
Dusk till Dawn – The daylight sensor is monitored and the lantern will only operate at
night time.
Indicates the lantern current Flash Code.
This information provides Sealite’s Flash Code in Hex decimal and the on/off flash
duration. Please refer to the provided list of Flash Codes included in the appendix.
Displays the lantern operating intensity in percentage. The SL-C510 can provide four
different intensity levels in percentage or with a step size of 3.125% (or 1/32%) nautical
miles when set by range.
• Low (25%)
• Medium (50%)
• Medium High (75%)
• High (100%)
Indicates the lantern real-time battery voltage level.
Displays the lantern current operating status. This include the information for:
• Battery health conditions;
• LED fault
Indicates if the Hibernation Mode is enabled or disabled. In the case of enabled the unit
will indicate the hibernation start and finish dates (day/month).
Indicates the last time the light has been accessed either via touch pad or SealitePro®
App.
On first touch test on, or when screen off, the screen will go into Test Mode for 5
seconds.
Sealite
V1.08
Standby
0.2 1.3
High (100%)
12V
OK
Disabled
10 JUL 2018
Test Off
Operation Mode
Flash Code:0F4
Range / Intensity
Battery Voltage
Status
Hibernation
Last Visit
Test LED

10
SealitePro®Bluetooth Guide
The SealitePro®application is used to communicate with Sealite lighting products that have
Bluetooth technology fitted. The Bluetooth control offers the following main functionality:
• Lantern Information
• Lantern Status
• Solar Calculations
• Programming Options
• Power Monitoring
• Manufacturing Data
• Advanced Operations
The SealitePro®Application is available on both Android and iOS devices. Most functions
between platforms are identical and the majority of the screenshots in this manual where
taken showing an iOS device screen. Where the Android device differs, both visual options
have been provided.
Programming the Lantern
Bluetooth®Controller Functions
The Sealite SL-C510 with AIS Bluetooth®Control System accessible via the SealitePro® App is divided
into seven simple sections as outlined below and displayed on the App home screen;
• Lantern Identification
• Lantern Type
• Lantern Name
• Bluetooth Authentication
• Lantern Colour
• Lantern Peak Intensity
• Lantern Battery Option
• Battery Voltage
• Status Flags
• Lantern Geolocation
• Solar Calculator Options
• Solar Charge
• Autonomy
• Operating Mode
• Flash Code
• Intensity
• Sync Offset
• GPS Mode
• Hibernation
• Lux Level
• GSM Power
• Load Current
• Load Current – Last Hour
• Load Current – Yesterday
• Charge Current
• Charge Current – Last Hour
• Charge Current - Yesterday
• Hardware
• Board Serial Number
• Manufacture Date
• Software Version
• Test LED
• Perform Factory Reset

SL-C510-AIS
Compact 5-9NM Solar Marine Lantern
Latest products and information available at www.sealite.com 11
Accessing the SealitePro®App for the first time
Start Menu
• Connect via Bluetooth - connect to a lantern.
• Support Tools - Solar Calculator to conduct simulations based on
lantern settings and locations.
NOTE – This feature provides lantern simulations only in regard to
battery autonomy on solar radiation. Changes may be
applied through “Connect via Bluetooth” option only.
• User Guides – Quick Start Guide and User Manual
Contact Sealite / Us – Provide product feedback and contact Sealite
Scan for Lanterns
When the “Connect via Bluetooth” option is selected, the App will
automatically scan for lanterns equipped with Bluetooth within
range.
• Select the lantern which requires setting or verification.
Pro®
Opening the SealitePro®App on an Android or iOS Device
Download the SealitePro®App from Google Play (search for
“Sealite” in the store) on an Android Tablet or Smartphone or via
the App store on an iOS tablet or phone. Open the App to prompt
the Sealite Bluetooth control system.
Expand the “Lantern Information” section if collapsed.
5

12
Create Security Access PIN
The factory default does not set the lantern with a Security PIN.
1. To set a PIN, select “Authentication Level” (“Bluetooth Authentication for iOS”) then enter a New PIN
and press “OK”. A confirmation of the PIN will be prompted.
2. Re-enter the same PIN and press “OK”.
Modify Current Security Access PIN
1. To set a new Security Access PIN select “Authentication Level”
(“Bluetooth Authentication for iOS”) and type the current Security
PIN.
2. After validation the App will request for the current PIN to be
re-entered. After confirmation enter the new Security PIN then
confirm the new PIN.
Note : If the Security PIN is lost, see Password Reset Procedure.
Also note that PIN ‘0000’ is reserved and will result in the lantern
having no PIN.
Identify Bluetooth Radio ID
When “Identify” on the Tablet or phone is selected, the
connected lantern will flash quickly (10 times). For iOS,
identify is represented by a flash / burst icon.
Set the Lantern Name
1. Press “Name” to change the lantern name. A user
defined name, comprising up to 16 alpha- numeric
characters (and -, $, # @) can be typed into the
dialogue box. It is recommended that the lantern be
programmed with a unique name.
2. Press apply and then Set to confirm.

SL-C510-AIS
Compact 5-9NM Solar Marine Lantern
Latest products and information available at www.sealite.com 13
SealitePro®Password Reset Procedure
In the event where the password set is unknown the
procedure below should be followed:
Step 1 – Disconnect the power supply from the light head:
(a). Remove the four socket-head screws on the top of
the lens assembly and lift the SL-C510 (lantern head)
assembly from the solar chassis.
(b). Disconnect the 4-Pin connector that joins the battery to the light head, then immediately re-
connect the battery and the lantern again.
Step 2 – Connect to the lantern using the SealitePro®:
Once the light head and battery are re-connected ensure the following procedure is conducted within
one minute. Otherwise the process at step 1 will need to be completed.
(a). Connect to a lantern by pressing “Connect via Bluetooth®”
(b). Select a lantern displayed on the “Connect via Bluetooth” screen.
Where examples are identified side by
side, the left is applicable to Android
devices and the right image to iOS
devices.
(c). Expand the “Lantern Information” drop down menu then press select “Authentication Level”
(“Bluetooth Authentication for iOS”).
NOTE – If “User Authenticated” under “Authentication Level” or Bluetooth Authentication appears the
limited time that allows to modify the PIN has expired.
Therefore, start the process again at Step 1;
Authenticated
5

14
(d). If “No PIN Set” appears under Authentication Level, please press Change PIN;
(e). Enter a New PIN and press “OK”. A prompt to confirm PIN will appear. Re-enter the same PIN and
press “OK”.
(f). One the procedure is complete, ensure the 4 socket head screws are replaced to secure the light head
and solar chassis.
• Colour Menu
Displays the lantern colour (White, Red, Green, Blue or Yellow)
• Peak Intensity Menu
Displays the Lantern Maximum Intensity in candelas (cd) based on
the LED Colour.
• Battery Option
This section displays the battery size capacity in Ampere hour (Ah)
and is configurable.
• Voltage
The battery health status.
• Status
Displays the battery health status, the current light sensor state
and if the GPS is enabled, synchronised or off station. Any warning
states will cause the status to be shown in amber or red.
• Lantern Geolocation
Displays the lantern coordinates and allows the location to be
plotted on a map.
5
Lantern Status
From the “Lantern Status” section the user can verify the current lantern status

SL-C510-AIS
Compact 5-9NM Solar Marine Lantern
Latest products and information available at www.sealite.com 15
Solar Calculations
This function estimates the lantern autonomy based on the lanterns current settings and geolocation.
• Solar Calculator Options
The SL-C510 with AIS has options to be fitted with SATCOM and GSM
modules to allow multiple lanterns synchronisation and monitoring.
The SealitePro®App offers the user the option to modify the GPS
and GSM by enabling or disabling the operation. In addition, it
offers different levels of transmissivity conditions for accurate solar
calculations.
• Solar Charge
This function estimates whether the collected solar charge is sufficient
to replenish battery consumption and will indicate if the unit is viable for
the selected location.
• Autonomy
This function estimates the lantern autonomy based on the lantern
settings and geolocation.
• Option 1
Use the current GPS location to establish the lantern autonomy.

16
• Option 2
An alternate method for setting the calculator is by using the “Solar calculator” function. Select your
product from the option(s) available, then select “Simulation Geolocation”.
Set Autonomy Location - Select a location globally to estimate the lantern autonomy if installed at that
location
The autonomy will be shown in amber or red if the configuration is not recommended.

SL-C510-AIS
Compact 5-9NM Solar Marine Lantern
Latest products and information available at www.sealite.com 17
Programming Options
Operating Mode:
To change the Operating Mode, press the Operating Mode field and then select one of three available
options:
Standby - The lantern is configured in a minimum current state in which the LEDs are always off and
the internal GPS is disabled.
Always on – The daylight sensor is disabled, and the lantern operates according to the set flash
character and intensity levels.
Dusk till Dawn – The daylight sensor is monitored, and the lantern will only operate at night time.
Once the Operating Mode is selected press “Set / Apply“ to confirm the change. As factory default the
lantern is always set to Dusk till Dawn mode.
Flash Code
Sealite marine lanterns may be set to any of the 256 IALA recommended flash characters which are
user-adjustable on site.
SEALITE®code reference is listed by the number of flashes. For the latest version of this document
visit www.sealite.com or email [e-mail]
Symbols
FL Flash followed by number Eg. Fl 1 S, one flash every second
FFixed
QQuick Flash
VQ Very Quick Flash
OC Occulting; greater period on than off
ISO Isophase; equal period on and off
LFL Long Flash Long
MO Morse code ( ) contains letter

18
To start the Flash Code settings press on the Flash Code field:
There are three ways to modify the lantern Flash Code:
1. Description: Modify the Flash Code by selecting the type and length (on/off) of the flash. Once the
Flash Code is established press “Set / Apply” to confirm the change.
Please Note – The number of flashing combinations are limited, for more information please check
the Sealite Flash Code table provided in the Appendix Section.
2. Code – Select the Flash Code from the Sealite Flash Code table provided in the Appendix section.
Once the Flash Code is established press “Set / Apply” to confirm the change.
Please Note – The number of flashing combinations are limited. For more information please check
the Sealite Flash Code table.

SL-C510-AIS
Compact 5-9NM Solar Marine Lantern
Latest products and information available at www.sealite.com 19
Custom – Create sequences of custom Flash Codes by nominating the on/off times. Once the
Flash Code is established press “Set /Apply” to confirm the change. To add multiple flashing
configurations, press “add” for each configuration.

20
Intensity
The lantern intensity level can be set by either defining the operating range of the lantern (in nautical
miles) or by entering the available percentage intensity level.
When Schmidt Clausen is applied, the lantern will automatically adjust the intensity level based on the
entered range and Flash Code setting. The intensity level is automatically adjusted each time a new
range is set.
NOTE: This does not apply for changing Flash Code - the user must re-set the intensity.
Select Intensity – Choose one of four intensity values - 25%, 50%, 75% or 100%.
Select Intensity – Choose one of Nautical Miles ranges available.