Mocka Vigo Entertainment Unit User manual

Vigo Entertainment Unit
1
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
WARNING: Any furniture that is not anchored to a wall has the
potential to tip over in certain circumstances, ie. if a child attempts
to climb on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall.
We supply a free safety wall anchor with all furniture sold and we
recommend these are used to prevent your product tipping. The
fixing device provided should fit most wall types, but please note
that different wall materials may require different fixing devices from
those supplied.
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
Hardware Supplied
Wall Strap
bolt &
locking nut
x16
G
12mm screw
x3
N
bracket
x4
O
pin
x4
P
feet
x4
H
hinge
x6
I
bracket
x8
J
washer
x3
K
brace
x3
L
socket
x3
M
pin
x4
F
14mm screw
x2
B
30mm screw
x18
C
12mm screw
x16
D
dowel
x16
E
18mm screw
x8
F
14mm screw
x48
Phillips & Flathead screwdrivers required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
Q
25mm screw
x2
R
wall plug
x2
S
wall strap
x2

12
Vigo Entertainment Unit
2
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 4 x feet (P) into steel frame [12] as shown. Attach steel frame [12] to steel frame [13] and secure with 8 x screws
(B).Tighten with a screwdriver.
13
13
12
12 12
12
P
B
B

3
3
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 4 x brackets (N) to assembled frame as shown and secure with
16 x screws (C). Tighten with a screwdriver.
Attach 3 x braces (K) to panels [5] and [6] and secure with 12 x screws
(F). Tighten with a screwdriver.
Vigo Entertainment Unit
4
C
N
F
K
56
F

5
4
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Insert 8 x dowels (D) into panel [2]. Attach panels [3], [4], [5] and [6] to
panel [2] and secure with 8 x bolts (A) and 8 x locking nuts (A). Tighten
with a screwdriver. Slide sockets (L) into brackets (K) as shown.
Insert 8 x dowels (D) into panels [3], [4], [5] and [6]. Slide panel [7] into
position as shown. Attach panel [1] to panels [3], [4], [5] and [6] and
secure with 8 x bolts (A) and 8 x locking nuts (A). Tighten with a
screwdriver.
Vigo Entertainment Unit
6
A A
L
K
3564
2
A
D
1
7
A
D
5
3
64

7
5
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach base to panel [2] and secure with 10 x screws (B). Tighten with
a screwdriver.
Attach 8 x bracket (I) to panel [7] and secure with 8 x screws (E). Attach
4 x pins (M) to panel [7]. Tighten with a screwdriver.
Vigo Entertainment Unit
8
2
B
E
I
7
MM

9
6
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 4 x hinges (H) to panels [3], [9], [6] and [10] and secure with 24
x screws (F). Attach 2 x screws (G) and 2 x washers (J) to panels [9]
and [10]. Adjust 3 x sockets (L) as shown. Tighten with a screwdriver.
Insert 4 x pins (O) as shown. Slide panel [8] into position as shown
Tighten with a screwdriver.
Vigo Entertainment Unit
10
H
F
910
6
3G
L
JGJ
8
O

11
7
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
Attach 2 x hinges (H) to panels [4] and [11] and secure with 12 x
screws (F). Attach 1 x screw (G) and 1 x washer (J) to panel [11].
Tighten with a screwdriver.
Once assembled lift furniture into place, do not drag. Use a drill
to create a small hole lining up with the top of the 2 x safety strap (S).
Fasten to the wall using 2 x wall anchors (R) and 2 x screws (Q). En
sure unit is balanced and steady before use.
Vigo Entertainment Unit
12
H
F
11
4
GJ
S
F
S
Q
R

13
8
Assembly Instructions
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
You’re done, enjoy!
Vigo Entertainment Unit