Target fairfax TGCRCNTB01 User manual

>>
© 2019 Target. The Bullseye Design is a trademark of Target Brands, Inc. All rights reserved.
fairfax
console table
assembly instructions
style # TGCRCNTB01
dpci # 249-17-4092
TCIN # 54571166

2
Congratulations on your latest Target purchase.
Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.
All you need to do is follow our simple instructions and you’ll be on your way to transforming your
room in no time. Good luck—though we’re condent you won’t need it.
before you begin
1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.
2. Use the carton as a working surface to prevent product damage during assembly.
3. Read through and review assembly steps.
4. Gather all tools prior to assembly.
tools needed

3
table of contents
introduction 2
hardware 4
parts list 5
how to use the cam lock system 6
assembly 7-14
QUESTIONS? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and dpci number ready when calling.

4
hardware
(H1) x 20
wooden dowel
(H2) x 11
cam bolt
(H3) x 11
cam
(H4) x 4
bolt
(H5) x 1
allen wrench
(H6) x 6
pan head screw
(H7) x 7
cam cover
(H8) x 1
small pan head screw
(H9) x 1
wall strap
(H10) x 1
wall anchor
(H11) x 1
wall screw
(H12) x 2
washer

5
exploded diagram
ITEM DESCRIPTION QUANTITY
1 top panel 1
2 left side frame 1
3 right side frame 1
4 upper rail 2
5 front panel 1
6 rear panel 1

how to use the cam lock system
1.
Screw cam bolt into panel
2.
Align cam bolt(s) with cam(s)
and insert all the way into
cross-bored hole(s)
3.
Push cam into panel - arrow feature
on cam top points to panel edge
4.
Rotate cam(s) clockwise 180° to
lock panels together
5.
Panels should be tight against each
other and connection should be rigid
6
1. 2. 3.
4. 5.

step 1: attach upper rails to left side frame
(H1) x 2
wooden dowel
(H2) x 4
cam bolt
(H3) x 2
cam
1.1. Carefully tap small wooden dowels into place in left side frame. Leave 1/2” of the dowels sticking out.
1.2. Screw-In cam bolts must be screwed down ush in left side frame.
1.3. Refer to page 6 for instructions on how to use the cam lock system.
7
Carefully tap small wooden dowels into place in left side frame. Leave 1/2” of the dowels sticking out.
Screw-In cam bolts must be screwed down ush in left side frame.

8
step 2: attach rear panel to front panel
(H1) x 2
wooden dowel
(H2) x 3
cam bolt
(H3) x 3
cam
2.1. Carefully tap small wooden dowels into place in front panel. Leave 1/2” of the dowels sticking out.
2.2. Screw-In cam bolts must be screwed down ush in front panel.
2.3. Refer to page 6 for instructions on how to use the cam lock system.

9
step 3: attach front/rear panels to left side frame
(H1) x 3
wooden dowel
(H3) x 2
cam
3.1. Carefully tap small wooden dowels into place in left side frame. Leave 1/2” of the dowels sticking out.
3.2. Refer to page 6 for instructions on how to use the cam lock system.

step 4: attach right side frame
(H1) x 5
wooden dowel
(H2) x 4
cam bolt
(H3) x 4
cam
4.1. Carefully tap small wooden dowels into place in right side frame. Leave 1/2” of the dowels sticking out.
4.2. Screw-In cam bolts must be screwed down ush in right side frame.
4.3. Refer to page 6 for instructions on how to use the cam lock system.
10
Carefully tap small wooden dowels into place in right side frame. Leave 1/2” of the dowels sticking out.
Screw-In cam bolts must be screwed down ush in right side frame.
Refer to page 6 for instructions on how to use the cam lock system.
(H3) x 4