SeeEyes SC-90DS User manual

9 CHANNEL DIGITAL COLOR SPLITTER
SC-90DS
User's Manual
SC-90DS

1
Precaution and Safety Guidelines
Please read this manual carefully and fully understand the portions of the
installation and operation instructions prior to installing and using the
product.
Should you have any part of them not understandable or if you have any
problem during your installation or in using it, please contact us.
Reproduction of this instruction or any part thereof without permission is
strictly prohibited.
You must read the precautions required for safe operation prior to using it
and operate it correctly.
Please understand that the contents of this operating instruction may
differ slightly due to functional improvement of a product and based on
the specification chosen by the user.
You can use this product easier and more conveniently if you use the
function of the product only after reading this operating instruction
carefully.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION :
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol within an
equilateral triangle, is intended to alert the user to
the presence of uninsulated “dangerous
voltage“ within the product‟s enclosure that may be
of sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
※WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.

2
1. Overview
1.1 Overview
With this splitter monitor can display various quads,
sequence, etc. video signal from the 9 number of video
inputs at SC-90DS. It displays the name of channel, date
and time as well as event such as loss.
1.2 Functions
User- Friendly POP UP menu
It is easy to access the MENU with the user friendly
interface.
Minimized button, LED display
Easy to run through the minimized buttons at front panel.
As LED shows the current working status of this
equipment, it is convenient to run & see.
Connect with 9pcs of cameras as well as real time display
of 9 splits
Auto Sequencer
Auto sequence of full screen display is available as per
setting.
Date, time, channel & current status display with OSD
Freeze
It is available to see the stop frame each and all at the 9
splits mode.
Loss alarm and event record
In case of loss at video input, it display, alarm and record
the event.
1:1 full screen display
1:1 scale full screen display is available as per the user‟s
selection.
Playback
Connecting with VCR input playback the recorded video.
Various Interface
Various interface such as 9 ports of video inputs, monitor
output, VCR inputs. As it has 75Ω BNC to connect DVR
easily, no need the video distribution amplifier.
Remarkable Feature
With the optimal circuit and chip designing, it is very
stable and able to apply the various applications.

3
RS-232/485
Remote control is available through RS-232/485 COM.
Combining with our DVR controller, it is available to
control & watch the eight sites with the real time.
1.3 Specifications
Model No.
SC- 90 DS
Video Input
9 Channels of cameras & VCR
BNC Type, Auto termination, 1.0Vp-p
75 Ω
Video
Output
Monitor Out
Yes
Loop Thru
Yes
Rec. Out
No
Function
Date / Time
Built-in RTC (accuracy : ± 1
min./month)
Y/M/D, H/M/S
Camera
Title
Max. 8 character (Eng, Num, *)
display /CH,
On / Off
Sequence
Set (Off ~ 30 Sec.) per channel
Exclude the loss channel
automatically
Split
1/2/4/7/9
OSD
OSD position set
OSD on/off
Loss
Loss displays & buzzer & record the
event
Motion
Detect
No
Resolution
500 TVL
Power
100 ~ 240V, 50/60Hz, 16W
Weight
3.50 kgs
Dimension
430 (W) x 44(H) x 350(D)

4
1.4. Components
Open the package and place the main unit at the plain
ground or installation site and then check the followings
components;
①SC-90DS Main unit x 1
②User manual x 1
③Power cord x 1
④19” rack mount wing x 2
2. Installation
2.1 Precautions
Make sure not to supply the power to the main unit
before install it.
Avoid any heavy impact, which cause the malfunctions.
Avoid the place where the magnetic material, radio
wave such as radio, TV, etc.
Do not install or use the main unit in an environment
where the humidity is high.
This installation should be made by a qualified service
person and should conform to all local codes.
It should be placed at the open space with the proper
temperature and humidity, and the distance from the
wall is at least 15cm.
Keep this main unit out of the direct rays of the sun.
If there is any smell and smoke at the main unit, please
stop supplying the power and kindly contact our service
center.
If the power is not turned on, please check the power
cord whether it is connected well or not.
In case nothing appears on the screen, please check the
video signal line connection.
In case the recorder is not working, please check the
VCR connection first and then video tape as well.
If you meet any other trouble not in the above, please
contact our service center.