Seers Medical ST7700 User manual

OPERATING INSTRUCTIONS
SEERS Shower Trolley
ST7700, ST7600 Hydraulic Models
ST7500, ST7800 Battery Operated Models

DOC No. 03-020-UM 2 ISSUE 2
INDEX
1. GENERAL INFORMATION –WARNINGS & CAUTIONS
2. HOW TO USE –
a. WHEEL SYSTEM
b. ADJUSTING THE HEIGHT OF THE TROLLEY
Hydraulic Elevation
Battery Operated
c. Battery Fitting and removal
d. Charging Unit
e. OPERATING THE SIDE SUPPORT RAILS
f. Bumper removal –narrow doorways
3. CLEANING INSTRUCTIONS
4. MAINTENANCE
5. WARRANTY
6. TECHNICAL DATA
7. BATTERY INFORMATION, HANDLING & PERFORMACE
SEERS SHOWER TROLLEY –OPERATING INSTRUCTIONS
PAGES
ISSUE
DATE
ALL
1.0
28.10.2013
ALL
2.0
08.01.2018

DOC No. 03-020-UM 3 ISSUE 2
1. GENERAL INFORMATION.
CONGRATULATIONS on the purchase of your SEERS MEDICAL Product. If these operating instructions
are adhered too, this product will provide many years of safe use.
IF THESE OPERATING INSTRUCTIONS ARE NOT FOLLOWED - YOUR WARRANTY COULD BE INVALID!
Always keep these Operating Instructions available for reference.
ALL User Interfaces are identified by the DARK GREY COLOUR.
WARNINGS!
Warnings identify potential hazards which if not followed correctly, could result in serious injury, or
possibly even death!
•Ensure battery operated trolleys are not used in the presence of flammable
gasses such as an anaesthetic agent.
•DO NOT EXCEED the Maximum Safe Working Load of 240 Kg (528 lbs) –which
must be distributed evenly across the working surface
•Do not concentrate uneven weight on either side of the trolley.
•Use only accessories that have been designed or approved for use with this
trolley.
•Children must not play with the couch at any time.
•Adequately supervise children in the proximity of the trolley.
WARNINGS! BATTERY OPERATED MODELS ST7500 & ST7800
•Handle batteries carefully.
•LINAK battery packs may emit flammable gases. Do not bring fire or a heated
object close to the battery pack, and never use the battery near a spark, fuses
and/or equipment that emits sparks.
•Do not store the battery in a closed environment or incorporate it into a
closed structure of an enclosure. Doing so can cause an explosion, fire,
equipment damage and bodily injury.
•Do not connect the positive terminal and the negative terminal of the LINAK
battery packs with a wire or other metals.
•Be careful with tools and do not wear jewellery when handling batteries. Short-
circuiting the terminals of the battery can cause burn injuries, damage to
the storage battery or trigger explosions.
•Never connect the LINAK battery packs directly to a power supply socket or an
automobile’s cigarette lighter without using a charger

DOC No. 03-020-UM 4 ISSUE 2
as a medium. Connecting the battery directly can cause the battery to leak fluid,
generate heat, explode, cause fires or bodily burns and injuries.
•LINAK battery packs contain toxic substances. If the battery’s internal fluid leaks
out and gets onto your skin or clothing, make sure it is washed off with clean
water. Additionally, if the fluid gets in your eyes, wash them with clean water
immediately, and see a doctor. If battery fluid gets into your eyes, it can cause a
loss of eyesight and when it gets on your skin, it can cause a burn on your skin.
•Do not use or store LINAK battery packs where the surrounding temperature
exceed 50°C, such as inside a hot automobile, in direct sunlight, or in front of a
stove or a source of intense heat. Doing so can shorten battery life, lower its
performance level, cause the battery to leak fluid, be damaged or deformed.
•Do not use a LINAK cord set for other devices than LINAK control boxes or LINAK
power supplies.
CAUTIONS!
Cautions identify circumstances which if not followed correctly, could result in failure or damage of
the equipment!
Attention refer to these Operating Instructions for further information

DOC No. 03-020-UM 5 ISSUE 2
2. HOW TO USE.
a. WHEEL SYSTEM
LARGE MOBILE WHEEL DESIGN
b. ADJUSTING THE HEIGHT OF THE COUCH
Hydraulic Operated Models (ST7600 & ST7700)
Battery Operated Models (ST7500 & ST7800)
1. To elevate the couch, push the pedal
downwards with your foot. Repeat until
correct height is achieved.
2. To lower couch, raise the pedal
upwards, by putting your toe
underneath the lever, lifting the lever
upwards.
Wheel Lever Down
All castors locked
Wheel Lever Horizontal
Castors un-locked
Lever Up –Directional steering
castor engaged at rear of trolley
1. To elevate the trolley, press and hold
the ‘Up Arrow’ on the handset until
correct height is achieved. Release the
button to lock the trolley at that height.
2. To lower the trolley, press and hold the
‘Down Arrow’ on the handset until
lowered height is achieved. Release the
button to lock the trolley at that height.
3.

DOC No. 03-020-UM 6 ISSUE 2
c. BATTERY OPERATED MODELS (ST7500 & ST7800)
Battery Fitting and removal
d. CHARGING UNIT
Further information with regards to the battery charging/performance is included at the end of this User
Manual
1. To fit the battery, simply offer it up
to the mounting bracket, aligning
with the connection point at the
control box end.
2. Once aligned simply click the battery into the
bracket until secure.
3. To release the battery, activate the metal
release clip behind the battery and support the
battery as you lift away.
CAUTION! DO NOT DROP BATTERY and be
READY TO TAKE THE WEIGHT OF THE BATTERY
ONCE REMOVED FROM FIXING BRACKET
4. The trolley is supplied with a separate
charger which can be wall mounted by fixing the
plate to a wall if desired.
5. The battery status is indicated on the
handset. Charge when required.
5. Do not use the mains charger in an
environment where it could get wet!

DOC No. 03-020-UM 7 ISSUE 2
e. SIDE SUPPORTS RAILS
a.
b.
f. BUMPER REMOVAL
To Raise the side support rail, simply lift and
rotate 180 degrees, and then engage fully
into socket.
To Lower the side support rail, simply lift out
of socket and rotate down 180 degrees to
disengaged position.
WARNING!
Children must not play with the trolley at any time.
Adequately supervise children in the proximity of the trolley.
Ensure the Side Support Rails are Fully Engaged into Socket prior to use
If necessary, to narrow the width of the
trolley (for narrow doorways) the
bumpers can be removed from the ends
of the trolley.
Simply loosen the thumb knob on the
underside near the bumper, until loose
enough to slide the bumper out of the
steel frame.

DOC No. 03-020-UM 8 ISSUE 2
3. CLEANING INSTRUCTIONS
General Cleaning:
To get rid of any dust or marks on the surface the Faux Leather MUST be wiped DAILY
with a moist soft cotton cloth. Visible and loose dirt can be picked up with a vacuum
cleaner (Do not use a brush type vacuum) Use a soapy cotton cloth and gently rub
stains with circular movements.
For more stubborn marks a dilute bleach solution can be used 5% Bleach to 95% Water.
Stain Removal:
Blot excess liquid as quickly as possible with a clean 100% cotton white absorbent cloth
or sponge. If necessary use clean warm water. Clean the entire area where the spot
occurred on the cushion, arm etc. Water may dissolve dirt particles and make cleaning
easier. Spills that are still moist are the easiest to remove. Leave to air dry naturally, do
not use a hair dryer etc to speed up the drying.
Coffee, tea etc spills: Use an absorbent white cloth or piece of paper. DO NOT RUB.
Allow the stain to be absorbed and removed from the material surface. Then rub gently
with white tissue paper in circular movements to remove any remaining dampness and
residue.
Ink, Ball point pen, Denim, hard stains: Rub the stain by means of gentle circular
movements with tissue dampened with 96°alcohol and water (1:1) After this rub the
surface with gentle circular movement with tissue paper to dry it.
Butter, oil, grease stains: Wipe excess butter, oil or grease off the surface with a clean
100% Cotton white dry cloth. Use a soapy cotton cloth and gently rub the stain with
circular movements. Use a clean damp cloth to wipe the area and dry the surface.
Chewing gum: Place ice cubes in a plastic bag and apply on the chewing gum. Wait
several minutes, lift the ice bag and remove the chewing gum.
DO NOT USE CHEMICALS, SADDLE SOAP, CLEANING SOLVENTS, FURNITURE POLISH,
OILS, VARNISH, ABRASIVE CLEANERS OR AMMONIA IN WATER.
WARNING!
DO NOT SATURATE PRODUCT
IF PRODUCT GETS SATURATED DURING CLEANING, THIS COULD ACCELERATE
CORROSION, REDUCING PRODUCTS LENGTH OF SERVICE.

DOC No. 03-020-UM 9 ISSUE 2
Frequency of routine trolley cleaning will depend on exact application.
1. Ensure the trolley is in a suitable area for cleaning.
2. The trolley should be locked by activating the wheel locking as previously described.
3. Prepare a solution from the guidelines detailed above.
4. DO NOT SATURATE PRODUCT –This should be a wipe down –not a soaking!
5. Start by cleaning the top surface of the trolley, working down onto the frames
below, ensuring to not accidentally activate any of the release levers, or user interface
parts.
6. Ensure the trolley is dry before re-use.
7. Safely discard of cleaning materials.
8. Wash hands thoroughly.
If DECONTAMINATING the trolley then repeat steps above using a dilute Hypochlorite
& warm water mixture (mixed at 10,000ppm) instead of warm water and soap.
It is crucial that any staining is treated as soon as possible but never later than 24
hours. Delays in cleaning will give stains time to react with the plasticiser in the liner
making it more and more difficult to remove.
Note: These are recommended or suggested methods of cleaning. The manufacturer is not
responsible for damage incurred while cleaning. Always try the cleaning method in a hidden area first
to see the results.
Remember if you are not sure contact you customer representative before proceeding.

DOC No. 03-020-UM 10 ISSUE 2
4. MAINTENANCE
1. A visual inspection should be carried out daily prior to use.
2. Regular servicing should be carried out a minimum of every six months or more frequently if
the trolley is in constant use.
3. Routine servicing or repair must only be performed by suitably qualified people.
4. Look for any visual signs of damage. Ensure all nuts, bolts and other fasteners are present and
fitted where expected. If loose (can be undone by hand), re- tighten using suitable tools –but
taking care to not over tighten as this could cause binding, juddering, identifiable by a likely
noise.
5. Check all pivot points –ensuring they are secured correctly by the securing nuts. IF THESE ARE
MISSING DO NOT USE THE TROLLEY –retighten where necessary –but do not over tighten.
6. Check hydraulic pump (hydraulic variant only) for smooth operation and any signs of leakage.
7. Ensure wheel system operates correctly –locking when activated, and the directional castor
activates when lever is in up position.

DOC No. 03-020-UM 11 ISSUE 2
5. WARRANTY
SEERS MEDICAL Limited standard terms and conditions apply to this device.
A copy of this is available upon request. This contains full details of warranty terms and does not
affect your statutory rights.
For any further information on this product, regarding spares, warranty, service or maintenance
information, please contact:
SEERS MEDICAL Limited
Kenton Road
Debenham
Suffolk
IP14 6L
T: [phone] E: [e-mail]
F: [phone] W: www.seersmedical.com
© SEERS MEDICAL Limited Manufactured in the UK by SEERS MEDICAL Limited.
As part of our ongoing development programme SEERS MEDICAL Limited reserves the right to alter or
modify specifications and materials without prior notice.

DOC No. 03-020-UM 12 ISSUE 2
6. TECHNICAL DATA
Index
ST7500 (Junior)
ST7600 (Junior)
ST7700
ST7800
Configuration
Elevation Control
Battery Operated
Hydraulic
Hydraulic
Battery Operated
Overall Length (cm)
160
160
195
195
Width (cm)
74
Minimum Height (cm)
41
Maximum Height (cm)
94
Safe Working Load &
Lifting Capacity
240 Kg (528lbs)
Battery Operated Models ST7500 & ST7800 Usage:
• Duty cycle: 10% or 2min. continuous use then 18min. not in use
• Ambient temperatures: +5° to +40 °C
• Approvals: IEC60601-1:2005 3rd edition, ANSI/AAMI ES60601:1 2005 3rd edition, CAN/CSA-22.2
No 60601-1:2008.

DOC No. 03-020-UM 13 ISSUE 2
7. BATTERY INFORMATION, HANDLING & PERFORMANCE

DOC No. 03-020-UM 14 ISSUE 2

DOC No. 03-020-UM 15 ISSUE 2

DOC No. 03-020-UM 16 ISSUE 2
SEERS MEDICAL Limited
Kenton Road
Debenham
Suffolk
IP14 6LA
t: [phone]
f: [phone]
e: [e-mail]
w: www.seersmedical.com
© SEERS MEDICAL Limited 2018
The mark on this product demonstrates conformity with the Medical Device Directive 93/42/EEC.