Sena TUFFTALK User manual

PREPARATION
Knowing the Headset Layout
Left
Jog Dial
Status LED
PTT Button
Short Antenna
PTT Port
Two-way
Radio Port
Right Ear Cup
MIC Port
Right
Charging LED
Left Ear Cup
Phone Button
Right Speaker
Cover
DC Power
Charging &
Firmware
Upgrade Port
Ambient
Mode Button
BASIC OPERATION
Operating the Buttons
Tap the
button
Double tap the
button
Press and hold
the button for
5 seconds
Press the two
buttons at the
same time
Rotate the
Jog Dial
Turning On/O the Headset
1
ON You will hear ascending
beeps.
“Hello”
OFF You will hear descending
beeps.
“Goodbye”
Simultaneously press and hold the Jog Dial and the Phone Button
for 1 second to turn on or o the headset.
Adjusting the Volume
You will hear a beep when the volume
reaches the maximum or minimum
level.
PAIRING
Pairing with Mobile Devices - Phone, Music
5
“Phone pairing”
Bluetooth
Bluetooth
Sena Tutalk
“Your headset is paired”
Using Phone Features
After Pairing…
Answering Calls
Ending Calls Rejecting Calls
or
or
or
“Hello”
until you hear a beep until you hear a beep
Making Calls
Using the Phone Keypad Using the Voice Dialer
Installing the Headset
2
1
1
2
Replacing the Antenna
1
2
Installing the Battery Checking the Battery Level
Blinking
70~100%
Blinking
30~70%
Blinking
0~30%
Turn on the headset and check the battery level via the Status LED.
5
“High” 70~100%
“Medium” 30~70%
“Low” 0~30%
Or, press and hold the Jog Dial and the Phone Button for 5 more
seconds when the headset turns on. You will hear a triple beep
and a voice prompt.
Charging the Battery
Charging
Fully charged
AC adapter
or
Using the Speed Dial
You will hear a beep.
“Speed dial”
Voice Menu
• Last number redial
• Speed dial 1
• Speed dial 2
• Speed dial 3
• Cancel
Listening to Music
1
After Pairing…
Playing or Pausing Music Tracking Forward or Backward
until you hear
a double beep
Rotate While
Pressing

Quick Start Guide
Industrial Bluetooth®
Communication System
Using the Intercom
After Pairing…
1
2
3
You can start or end a two-way intercom conversation with each
headset.
USEFUL FUNCTIONS
Turning On/O the Ambient Mode
Using the Built-in Two-way Radio
Push to talk
First, connect the two-way radio cable with the headset.
RADIO
Turning On/O the FM Radio
1
You will hear a double beep sound.
“FM on” or “FM o”
Seeking Stations
Rotate While Pressing
Saving or Deleting Stations
To Sa ve To Delete
“Preset (#)” “(#)” “Save preset
(#)”
“Delete preset
(#)”
Listening to Preset
Stations
SETTING
Method1) Using the headset
You will hear a double beep sound.
“Conguration menu”
Method2) Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to congure the headset
settings.
For details about downloading the Sena Device Manager, refer to the
leaet included in the package.
Method3) Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android
or iPhone from Google Play or App Store.
Refer to www.sena.com/headset-app/ for more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Settings to congure the headset settings.
16.May
You can download the full versionof the manual and view other
Sena products at the Sena website: www.sena.com.
INTERCOM
Pairing with Other Headsets
55
Headset A Headset B
“Intercom pairing”
Follow the steps above to pair with two or more headsets.
TROUBLESHOOTING
Factory Reset
If you want to restore the Tutalk to factory default settings, press and hold
the Phone Button for 10 seconds. Tap the Jog Dial. The headset
automatically restores the default settings and turns o.
Fault Reset
If the Tutalk is not working properly for any reason,
push the pin-hole reset button located below the left
ear cup.
OPTIONAL CABLE ACCESSORIES
TUFFTALK-A0110
2-way Radio Cable for Kenwood
Twin-pin Connector
TUFFTALK-A0111
2-way Radio Cable for Motorola
Twin-pin Connector
TUFFTALK-A0112
2-way Radio Cable for Motorola
Single-pin Connector
TUFFTALK-A0113
2-way Radio Cable for Icom Twin-pin
Connector
TUFFTALK-A0114
2-way Radio Cable for Yaesu Single-pin
Connector
TUFFTALK-A0115
2-way Radio Cable for Midland Twin-pin
Connector
TUFFTALK-A0116
2-way Radio Cable with an Open End
TUFFTALK-A0117
2-way Radio Cable with Straight Typefor
Midland or Icom Twin-pin Connector
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
E-mail: [email protected]

PREPARATION
Knowing the Headset Layout
Left
Jog Dial
Status LED
PTT Button
PTT Port
Two-way
Radio Port
MIC Port
Right Ear Cup
Right
Charging LED
Left Ear Cup Right
Speaker
Cover
Phone Button
Short Antenna
DC Power Charging &
Firmware Upgrade Port
Ambient
Mode Button
BASIC OPERATION
Operating the Buttons
Tap the
button
Double tap the
button
Press and hold
the button for
5 seconds
Press the two
buttons at the
same time
Rotate the
Jog Dial
Turning On/O the Headset
ON You will hear ascending
beeps.
“Hello”
OFF You will hear descending
beeps.
“Goodbye”
Simultaneously press and hold the Jog Dial and the Phone Button
for 1 second to turn on or o the headset.
Adjusting the Volume
You will hear a beep when the volume
reaches the maximum or minimum
level.
PAIRING
Pairing with Mobile Devices - Phone, Music
5
“Phone pairing”
Bluetooth
Bluetooth
Sena Tutalk
“Your headset is paired”
Using Phone Features
After Pairing…
Answering Calls
Ending Calls Rejecting Calls
or
or
or
“Hello”
until you hear a beep until you hear a beep
Making Calls
Using the Phone Keypad Using the Voice Dialer
Installing the Battery
2
1
1
2
Replacing the Antenna
1
2
1
2
Checking the Battery Level
Blinking
70~100%
Blinking
30~70%
Blinking
0~30%
Turn on the headset and check the battery level via the Status LED.
5
“High” 70~100%
“Medium” 30~70%
“Low” 0~30%
Or, press and hold the Jog Dial and the Phone Button for 5 more
seconds when the headset turns on. You will hear a triple beep
and a voice prompt.
Charging the Battery
Charging
Fully charged
AC adapter
or
Using the Speed Dial
You will hear a beep.
“Speed dial”
Voice Menu
• Last number redial
• Speed dial 1
• Speed dial 2
• Speed dial 3
• Cancel
Listening to Music
1
After Pairing…
Playing or Pausing Music Tracking Forward or Backward
until you hear
a double beep
Rotate While
Pressing

Quick Start Guide
Industrial Bluetooth®
Communication System
Using the Intercom
After Pairing…
1
2
3
You can start or end a two-way intercom conversation with each
headset.
USEFUL FUNCTIONS
Turning On/O the Ambient Mode
Using the Built-in Two-way Radio
Push to talk
First, connect the two-way radio cable with the headset.
RADIO
Turning On/O the FM Radio
1
You will hear a double beep sound.
“FM on” or “FM o”
Seeking Stations
Rotate While Pressing
Saving or Deleting Stations
To Sa ve To Delete
“Preset (#)” “(#)” “Save preset
(#)”
“Delete preset
(#)”
Listening to Preset
Stations
SETTING
Method1) Using the headset
You will hear a double beep sound.
“Conguration menu”
Method2) Using the Sena Device Manager
Connect the headset to your computer via a USB cable. Launch the Sena
Device Manager and click DEVICE SETTING to congure the headset
settings.
For details about downloading the Sena Device Manager, refer to the
leaet included in the package.
Method3) Using the Sena Smartphone App
1. On your smartphone, download the Sena Smartphone App for Android
or iPhone from Google Play or App Store.
Refer to www.sena.com/headset-app/ for more details.
2. Pair your smartphone with the headset.
3. Run the Sena Smartphone App. Swipe the screen to the right and tap
Settings to congure the headset settings.
16.May
You can download the full versionof the manual and view other
Sena products at the Sena website: www.sena.com.
INTERCOM
Pairing with Other Headsets
5 5
Headset A Headset B
“Intercom pairing”
Follow the steps above to pair with two or more headsets.
TROUBLESHOOTING
Factory Reset
If you want to restore the Tutalk to factory default settings, press and hold
the Phone Button for 10 seconds. Tap the Jog Dial. The headset
automatically restores the default settings and turns o.
Fault Reset
If the Tutalk is not working properly for any reason,
push the pin-hole reset button located below the left
ear cup.
OPTIONAL CABLE ACCESSORIES
TUFFTALK-A0110
2-way Radio Cable for Kenwood
Twin-pin Connector
TUFFTALK-A0111
2-way Radio Cable for Motorola
Twin-pin Connector
TUFFTALK-A0112
2-way Radio Cable for Motorola
Single-pin Connector
TUFFTALK-A0113
2-way Radio Cable for Icom Twin-pin
Connector
TUFFTALK-A0114
2-way Radio Cable for Yaesu Single-pin
Connector
TUFFTALK-A0115
2-way Radio Cable for Midland Twin-pin
Connector
TUFFTALK-A0116
2-way Radio Cable with an Open End
TUFFTALK-A0117
2-way Radio Cable with Straight Typefor
Midland or Icom Twin-pin Connector
Sena Technologies, Inc.
www.sena.com
Customer Support: support.sena.com
E-mail: [email protected]