Sensear SM1 User manual

SM1x INSTRUCTIONS
Turn On
Press and hold the power button on the right-hand side of the unit. You will hear the welcome message
‘Sensear, Sounds Good To Me’ The green light on the right hand side of the unit will begin to ash slowly.
You are in SENS Mode – Speech Enhancement Noise Suppression.
Turn Off
Press and hold the power button on the right-hand side of the unit. You will hear the message ‘System
Shutting Down’.
Adjusting The Volume
Press the plus (+) or minus (-) sign button on the right-hand side of the unit. For the highest volume continue
to press the plus (+) button until you hear ‘maximum’. The unit limits ear noise exposure to 82dB(A).
Switching Modes
To switch between SENS and passive or quiet mode press the power button once you have turned on the
unit. The green light on the right hand side of the unit will ash intermitently in SENS mode and quickly in
passive or quiet mode.
Two Way Radio Instructions
With the unit turned on connect the 2-way radio by using the cable provided and turn the radio on, you
should hear the message ‘Two-Way Radio On’.
If you do not hear the message ‘Two Way Radio On’ press and hold the plus (+) button on the right hand
side of the unit. You will hear the message ‘system setup, battery status’ then press the power button until
you hear ‘communication options’. Press the plus (+) button once more and you will hear ‘Two Way Radio
Enabled’.
TIP: Push to talk functionality can be used on the device or via the multi function button on the headset.

SM1x INSTRUCTIONS
Enabling Bluetooth
With the unit turned on press and hold the plus (+) button on the right hand side of the unit. You will hear the
message ‘System Setup, Battery Status’ then press the power button until you hear ‘Bluetooth Options’.
Press the plus (+) button on the right hand side of the unit and you will hear ‘Bluetooth enabled’.
To disable Bluetooth simply follow the same instructions but press the minus button as opposed to the plus
button.
Pairing your Bluetooth device
First ensure you have enabled Bluetooth then press and hold the multi function button on the left hand side
of the unit. You will hear the message ‘Bluetooth Discoverable’. The light on the left hand side of the unit will
turn blue and stay on constantly.
Enter connectivity options on your Bluetooth device and under Bluetooth search for new devices. Once the
search is complete select SM1x and when prompted for a password enter four zeros. The pair is complete
once you hear a bell tone in the headset.
Tip: Calls can be answered, or ended, on the device or via the multi function button on the headset.