SEW-Eurodrive Movidrive HD Series Operating instructions

MOVIDRIVE®MOVITRAC®MOVIDYN®
HD... Output Choke
Edition
03/2004
Addendum to the Operating Instructions
1127 0012 / EN

2
Addendum – HD...Output Choke for MOVIDRIVE®, MOVITRAC®, MOVIDYN®
1Installation Notes
HD... Output Choke Option
1 HD... Output Choke Option
1.1 Installation Notes
• TheHD...outputchokeisusedtosuppressradiatedinterferencefromtheunshielded
motor cable. For HD001 to HD003 we recommend routing the motor cable through
the output choke with 5 loops. Only 3 loops are possible if the cable has a large di-
ameter. To make up for this, 2 output chokes should be connected in series.
• Output chokes HD001 to HD003 are allocated using the cable cross sections of the
motor feeders. Consequently, there is no separate allocation table for the 230 V
units.
• The HD004 output choke is allocated to size 6 units (0900...1320). The number of
loops is fixed for HD004.
1.2 Technical data
•This information does not replace the detailed operating instructions!
•Installation and startup should only be performed by trained personnel observ-
ing the relevant accident prevention regulations and operating instructions!
53636AXX
Figure 1: Connecting the motor to output chokes HD001... HD003
[1] HD... output choke [2] Motor cables [3] Motor
UV W
45 6
n =5
UVWPE
MOVIDRIVE
MOVITRAC
MOVIDYN
®
®
®
[2]
[1]
[3]
•Only route the 3 phases U, V and W through the output choke (→Fig.1).
•Do not route the PE conductor through the output choke!
Output choke type HD0011)
1) The output choke type HD... is not a UL/cUL-relevant component.
HD0021) HD0031) HD0041)
Part number 813 325 5 813 557 6 813 558 4 816 885 7
Max. power loss PVmax 15 W 8 W 30 W 100 W
For cable cross sections/connec-
tions 1.5...16 mm2(AWG 16...6) ≤1.5 mm2(AWG 16) ≥16 mm2(AWG 6) M12 terminal studs

Addendum – HD...Output Choke for MOVIDRIVE®, MOVITRAC®, MOVIDYN®
3
1
Dimensions
HD... Output Choke Option
1.3 Dimensions
Mounting position as require
05660AXX
Figure 2: Dimensions, HD001...HD003 and HD004 output chokes
All dimensions in mm (in):
Output choke
type Main dimensions Fixing dimensions Inside ∅Hole dimen-
sion Weight
A B C a b d c kg (lb)
HD001 121 (4.76) 64 (2.52) 131 (5.16) 80 (3.15) 50 (1.97) 50 (1.97) 5.8 (0.23) 0.5 (1.1)
HD002 66 (2.60) 49 (1.93) 73 (2.87) 44 (1.73) 38 (1.50) 23 (0.91) 0.2 (0.44)
HD003 170 (6.69) 64 (2.52) 185 (7.28) 120 (4.72) 50 (1.97) 88 (3.46) 7.0 (0.28) 1.1 (2.42)
HD004 150 (5.91) 400 (15.75) 360 (14.17) 120 (4.72) 370 (14.57) - 9.0 (0.35) 12.5 (27.5)

SEW-EURODRIVE GmbH & Co KG · P.O. Box 3023 · D-76642 Bruchsal/Germany
Phone [phone] · Fax [phone]
http://www.sew-eurodrive.com · [email protected]