Sharp AL-2051 User manual

Parts marked with “ ” are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
SERVICE MANUAL
CONTENTS
SHARP CORPORATION
CODE: 00ZAL2051/S1E
DIGITAL MULTIFUNC-
TIONAL SYSTEM
MODEL AL-2051
[1] GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1
[2] SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 1
[3] CONSUMABLE PARTS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 - 1
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES . . . . . . . . . 4 - 1
[5] UNPACKING AND INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . 5 - 1
[6] COPY PROCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1
[7] OPERATIONAL DESCRIPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . 7 - 1
[8] DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . 8 - 1
[9] ADJUSTMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 - 1
[10] SIMULATION, TROUBLE CODES . . . . . . . . . . . . . . . . . . . . . . . 10 - 1
[11] USER PROGRAM. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 1
[12] ELECTRICAL SECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 - 1
[13] CIRCUIT DIAGRAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 1

CONTENTS
[1] GENERAL
1. Major functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
[2] SPECIFICATIONS
1. Basic Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1
2. Operation specifications. . . . . . . . . . . . . . . . . . . . . . . . 2-1
3. Copy performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
4. Network board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
5. Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
6. Scan function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
7. RSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
[3] CONSUMABLE PARTS
1. Supply system table. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
A. Brazil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
B. LAG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
C. Europe Subsidiary. . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
D. SCA/SCNZ/SBI/STCL/SRS. . . . . . . . . . . . . . . . . . . 3-1
E. SRH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1
2. Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
3. Production control number (lot No.) identification . . . . 3-2
[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES
1. Appearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
2. Internal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1
3. Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
4. Motors and solenoids. . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
5. Sensors and switches . . . . . . . . . . . . . . . . . . . . . . . . . 4-4
6. PWB unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
7. Cross sectional view . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
[5] UNPACKING AND INSTALLATION
1. Copier installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
2. Cautions on handling . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1
3. Checking packed components and accessories . . . . . 5-1
4. Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
5. Removing protective packing materials. . . . . . . . . . . . 5-2
6. Installing the TD cartridge . . . . . . . . . . . . . . . . . . . . . . 5-2
7. Loading paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2
8. Power to copier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
9. Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
A. Before installation . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3
B. Installing the software . . . . . . . . . . . . . . . . . . . . . . . 5-4
C. Configuring the printer driver. . . . . . . . . . . . . . . . . . 5-8
D. Setting up button manager . . . . . . . . . . . . . . . . . . . 5-9
10. Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
A. USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
B. RJ45 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
11. Moving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
12. Scanner moisture-proof kit. . . . . . . . . . . . . . . . . . . . . 5-10
A. Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-10
B. Precautions at installation . . . . . . . . . . . . . . . . . . . 5-10
C. Attachment method . . . . . . . . . . . . . . . . . . . . . . . . 5-11
[6] COPY PROCESS
1. Functional diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1
2. Outline of print process . . . . . . . . . . . . . . . . . . . . . . . . 6-2
3. Actual print process . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2
[7] OPERATIONAL DESCRIPTIONS
1. Outline of operation. . . . . . . . . . . . . . . . . . . . . . . . . . . .7-1
2. Scanner section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
A. Scanner unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
B. Optical system . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
C. Drive system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-2
3. Laser unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
A. Basic structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
B. Laser beam path. . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
C. Composition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
4. Fuser section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-3
A. General description. . . . . . . . . . . . . . . . . . . . . . . . . .7-4
5. Paper feed section and paper transport section . . . . . .7-4
A. Paper transport path and general operations . . . . . .7-4
6. Process unit new drum detection mechanism. . . . . . . .7-7
7. RSPF section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8
A. Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8
B. Document transport path and basic composition . . .7-8
C. Operational descriptions. . . . . . . . . . . . . . . . . . . . . .7-8
D. RSPF open/close detection
(book document detection) . . . . . . . . . . . . . . . . . . . .7-9
8. D-D (Duplex to Duplex) mode paper/document transport
(Duplex model) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9
A. Initial state. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9
B. Front copy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9
C. Back copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-9
9. Shifter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-10
[8] DISASSEMBLY AND ASSEMBLY
1. High voltage section . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-1
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . .8-1
C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . .8-1
D. Charger wire cleaning. . . . . . . . . . . . . . . . . . . . . . . .8-1
E. Charger wire replacement. . . . . . . . . . . . . . . . . . . . .8-2
2. Operation panel section . . . . . . . . . . . . . . . . . . . . . . . .8-2
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-2
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . .8-2
C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . .8-3
3. Optical section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-3
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-3
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . .8-3
C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . .8-5
4. Fusing section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-5
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-5
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . .8-5
C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . . .8-8
5. Tray paper feed/transport section . . . . . . . . . . . . . . . . .8-8
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-8
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . . .8-8
C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . .8-13
6. Manual paper feed section . . . . . . . . . . . . . . . . . . . . .8-14
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-14
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . .8-14
C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . .8-15
D. Pressure plate holder attachment. . . . . . . . . . . . . .8-15
7. Rear frame section . . . . . . . . . . . . . . . . . . . . . . . . . . .8-16
A. List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8-16
B. Disassembly procedure . . . . . . . . . . . . . . . . . . . . .8-16
C. Assembly procedure. . . . . . . . . . . . . . . . . . . . . . . .8-17

8. Power section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17
A. List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17
B. Disassembly procedure. . . . . . . . . . . . . . . . . . . . . 8-17
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . 8-17
9. Duplex motor section. . . . . . . . . . . . . . . . . . . . . . . . . 8-17
A. List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-17
B. Disassembly procedure. . . . . . . . . . . . . . . . . . . . . 8-17
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . 8-17
10. Reverse roller section . . . . . . . . . . . . . . . . . . . . . . . . 8-18
A. List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18
B. Disassembly procedure. . . . . . . . . . . . . . . . . . . . . 8-18
C. Assembly procedure . . . . . . . . . . . . . . . . . . . . . . . 8-18
11. RSPF section. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18
A. Front cabinet, rear cabinet . . . . . . . . . . . . . . . . . . 8-18
B. Upper door unit . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-18
C. Document tray unit . . . . . . . . . . . . . . . . . . . . . . . . 8-19
D. Upper door open/close sensor . . . . . . . . . . . . . . . 8-19
E. Reverse clutch, paper exit roller . . . . . . . . . . . . . . 8-19
F. Drive unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-19
G.Shutter solenoid . . . . . . . . . . . . . . . . . . . . . . . . . . 8-20
H. Pickup roller, take-up roller . . . . . . . . . . . . . . . . . . 8-21
I. Paper empty sensor . . . . . . . . . . . . . . . . . . . . . . . 8-21
J. PS roller. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-22
K. Upper transport roller . . . . . . . . . . . . . . . . . . . . . . 8-22
L. Paper sensor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-23
M.Lower transport roller . . . . . . . . . . . . . . . . . . . . . . 8-23
N. Paper exit sensor . . . . . . . . . . . . . . . . . . . . . . . . . 8-23
[9] ADJUSTMENTS
1. Optical section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-1
A. Copy magnification ratio adjustment . . . . . . . . . . . . 9-1
B. Image position adjustment . . . . . . . . . . . . . . . . . . . 9-2
2. Copy density adjustment . . . . . . . . . . . . . . . . . . . . . . . 9-4
A. Copy density adjustment timing . . . . . . . . . . . . . . . 9-4
B. Note for copy density adjustment . . . . . . . . . . . . . . 9-4
C. Necessary tool for copy density adjustment . . . . . . 9-4
D. Features of copy density adjustment. . . . . . . . . . . . 9-4
E. Copy density adjustment procedure . . . . . . . . . . . . 9-5
3. High voltage adjustment . . . . . . . . . . . . . . . . . . . . . . . 9-5
A. Main charger (Grid bias) . . . . . . . . . . . . . . . . . . . . . 9-5
B. DV bias check . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6
4. Duplex adjustment. . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6
A. Adjusting the paper reverse position in memory
for duplex copying . . . . . . . . . . . . . . . . . . . . . . . . . . 9-6
B. Adjusting trailing edge void in duplex copy mode . . 9-6
5. RSPF scan position automatic adjustment . . . . . . . . . 9-7
6. RSPF mode sub scanning direction magnification ratio
adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8
7. Automatic black level correction . . . . . . . . . . . . . . . . . 9-8
[10] SIMULATION, TROUBLE CODES
1. Entering the simulation mode . . . . . . . . . . . . . . . . . . 10-1
2. Key rule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
3. List of simulations . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-1
4. Descriptions of various simulations . . . . . . . . . . . . . . 10-2
5. Trouble codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-32
A. Trouble codes list . . . . . . . . . . . . . . . . . . . . . . . . 10-32
B. Details of trouble codes. . . . . . . . . . . . . . . . . . . . 10-32
[11] USER PROGRAM
1. User programs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-1
2. Selecting a setting for a user program. . . . . . . . . . . . 11-3
[12] ELECTRICAL SECTION
1. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-1
A. Overall block diagram. . . . . . . . . . . . . . . . . . . . . . .12-1
2. Actual wiring diagram . . . . . . . . . . . . . . . . . . . . . . . . .12-2
A. MCU PWB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-2
B. RSPF unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-3
C. Network Board . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-3
3. Signal name list. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-4
[13] CIRCUIT DIAGRAM
1. MCU PWB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13-1
2. OPERATION PWB . . . . . . . . . . . . . . . . . . . . . . . . . .13-15

PARTS GUIDE
CONTENTS
This document has been published to be used for
notice.
SHARP CORP
CODE:00ZAL2040C028
DIGITAL MULTIFUNCTIONAL
SYSTEM
1Exteriors
2 SPF exteriors [AL-2030/AL-2035/
AL-2040CS/AL-2040/AL-2031/AL-2041]
3 SPF transport unit [AL-2030/AL-2035/
AL-2040CS/AL-2040/AL-2031/AL-2041]
4 SPF pick up unit [AL-2030/AL-2035/
AL-2040CS/AL-2040/AL-2031/AL-2041]
5 Operation panel [AL-2020/AL-2030/
AL-2035/AL-2040CS/AL-2040]
6 Operation panel
[AL-2021/AL-2031/AL-2041]
7Operation panel
[AL-2050CS/AL-2050/AL-2060/AL-2051]
8 Side door unit
9 Optical frame
F LSU section [AL-2020/AL-2030/AL-2035/
AL-2040CS/AL-2040/AL-2021/AL-2031/
AL-2041]
G Middle frame
H Base plate unit 1
I Base plate unit 2
J Fusing unit
K Drive unit
L Multi manual paper feed cover unit
M Multi manual paper feed unit
N Socket holder unit
O TC case unit
P 250 sheets tray
Q Harness
R 2nd frame unit
[AL-2040CS/AL-2050CS]
S 2nd paper feed unit
[AL-2040CS/AL-2050CS]
T Packing material & accessories
U Original cover unit [AL-2020/AL-2021]
V RSPF exteriors
[AL-2050CS/AL-2050/AL-2060/AL-2051]
W RSPF transport section
[AL-2050CS/AL-2050/AL-2060/AL-2051]
X RSPF paper feed section
[AL-2050CS/AL-2050/AL-2060/AL-2051]
Y Shifter unit
[AL-2050CS/AL-2050/AL-2060/AL-2051]
AL-2040CS/AL-2035/
AL-2050CS/AL-2040/
AL-2020/AL-2050/
AL-2030/AL-2060/
AL-2021/AL-2031/
AL-2041/AL-2051
MODEL
Revised Edition
AL-2040CS

1Exteriors
NO. PARTS CODE Inter-
change PRICE RANK NEW MARK PART RANK DESCRIPTION TR No. Effective
time
1GCAB-0109QSZZ AP N D Front cover [Except AL-2021/AL-2031/AL-2041/AL-2051]
GCAB-0109QSAZ AN N D Front cover [AL-2021/AL-2031/AL-2041/AL-2051]
2
LSOU-0048QSZZ AX N D Delivery tray [AL-2050CS/AL-2050/AL-2060]
LSOU-0048QSZ2 5AX D
Delivery tray [With GDAI-0001QSW7]
[For Europe,effective time Jun/06]
[AL-2050CS/AL-2050/AL-2060] DCE709 08/03 R/C
LSOU-0046QSZZ AY N D Delivery tray [AL-2020/AL-2035/AL-2030/AL-2040CS/AL-2040]
LSOU-0046QSZ1 5AY D
Delivery tray [With GDAI-0001QSW7]
[For Europe,effective time Jun/06]
[AL-2020/AL-2035/AL-2030/AL-2040CS/AL-2040] DCE709 08/03 R/C
LSOU-0046QSA1 AW N D Delivery tray [AL-2021/AL-2031/AL-2041]
LSOU-0048QSA2 AZ N D Delivery tray [AL-2051]
3XBBS730P08000 AA C Screw(3×8)
4
LSOU-0043QSW2 AK N D Extension tray [AL-2050CS/AL-2050/AL-2060]
LSOU-0008QSW1 AG N D Extension tray [AL-2020/AL-2035/AL-2030/AL-2040CS/AL-2040]
LSOU-0008QSA1 AF N D Extension tray [AL-2021/AL-2031/AL-2041]
LSOU-0043QSA2 AH N D Extension tray [AL-2051]
5XEBS740P12000 AA C Screw(4×12)
6PTPE-0041QSZZ AB C Glass fixing tape B
7DHAI-0517QSPZ AK C OP-MCU harness [AL-2050CS/AL-2050/AL-2060/AL-2051]
DHAI-0513QSPZ AF N C OP-MCU harness [AL-2020/AL-2035/AL-2030/AL-2040CS/
AL-2040/AL-2021/AL-2031/AL-2041]
8PSHEZ0369QSZZ AE C Shading sheet
9XHBS730P08000 AB C Screw(3×8)
10
GCAB-0111QSZZ AL N D Left cabinet
GCAB-0111QSZ1 3AL D
Left cabinet [Improve performance]
[For Europe,effective time Mar/08]
[Except AL-2021/AL-2031/AL-2041/AL-2051] 07/12 R/C
GCAB-0111QSA1 AK N D Left cabinet [AL-2021/AL-2031/AL-2041/AL-2051]
11 TLABH0706QSZZ AH N D Operation instruction label
[AL-2020/AL-2035/AL-2030/AL-2040CS/AL-2040]
12 GCOV-0067QSZZ AH N D Rear cover [Except AL-2021/AL-2031/AL-2041/AL-2051]
GCOV-0067QSAZ AH N D Rear cover [AL-2021/AL-2031/AL-2041/AL-2051]
13 CFIX-0027QS01 AK N D Glass fixing plate CFIX-0027QS02 - AM D Glass fixing plate [Except AL-2021/AL-2031/AL-2041/AL-2051] 1st lot
CFIX-0027QS07 AL N D Glass fixing plate [AL-2021/AL-2031/AL-2041/AL-2051]
14 PGLSP0007QSZZ AV B Table glass
15 PTPE-0040QSZZ AC C Glass fixing tape A
16 GCOV-0058QSW1 AH N D NWB option cover [Except AL-2021/AL-2031/AL-2041/AL-2051]
GCOV-0058QSA1 AG N D NWB option cover [AL-2021/AL-2031/AL-2041/AL-2051]
17
GCAB-0116QSZZ AL N D Right cabinet [AL-2020]
GCAB-0116QSAZ AN N D Right cabinet [AL-2021]
GCAB-0112QSZZ AL N D Right cabinet [Except AL-2020/AL-2021/AL-2031/AL-2041/AL-2051]
GCAB-0112QSAZ AM N D Right cabinet [AL-2031/AL-2041/AL-2051]
18
GCAB-0113QSZZ AX N D Rear cabinet
GCAB-0113QSZ1 3AX D
Rear cabinet [Improve performance]
[For Europe,effective time Mar/08]
[Except AL-2021/AL-2031/AL-2041/AL-2051] 07/12 R/C
GCAB-0113QSA1 AY N D Rear cabinet [AL-2021/AL-2031/AL-2041/AL-2051]
19 TCAUA1069FCZZ AC D Service caution label
[AL-2020 Argentina,Asia/AL-2030/AL-2035/AL-2040CS/AL-2050CS]
TCAUA1069FCAZ AC D Service caution label [AL-2021/AL-2031/AL-2041/AL-2051]
20 PMLT-0024QSZZ AC C Fan cushion
21 PFILZ0002QSZZ AL A Ozone filter [AL-2020 Argentina,Asia/AL-2030/AL-2035/AL-2040CS/
AL-2050CS/AL-2021/AL-2031/AL-2041/AL-2051]
PFILZ0020QSZZ 3ANN A
Ozone filter [Specification change]
[AL-2020 Other Countries/AL-2040/AL-2050/AL-2060] 07/10
22 PTPE-0064QSZZ -AC C
SPF glass tape [Missing parts code]
[Except AL-2020/AL-2021] 1st lot
23 PGLSP0008QSZZ AH B SPF glass [Except AL-2020/AL-2021]
25 PTPE-0010QSZZ AC C Slit glass tape [Except AL-2020/AL-2021]
26 GCAB-0110QSZZ AK N D Front cover left [Except AL-2021/AL-2031/AL-2041/AL-2051]
GCAB-0110QSAZ AG N D Front cover left [AL-2021/AL-2031/AL-2041/AL-2051]
27
GCOV-0074QSZZ AG D Rear cabinet cover [AL-2050CS/AL-2050/AL-2060]
GCOV-0068QSZZ AH N D Rear cabinet cover [AL-2020/AL-2030/AL-2035/AL-2040CS/AL-2040]
GCOV-0068QSAZ AH N D Rear cabinet cover [AL-2021/AL-2031/AL-2041]
GCOV-0074QSAZ AH N D Rear cabinet cover [AL-2051]
28 PSHEZ0574QSZZ AD N C Glass sheet [AL-2030/AL-2035/AL-2040CS/
AL-2050CS/AL-2021/AL-2031/AL-2041/AL-2051]
29 TLABZ0105RSZZ AD D Label [Argentina,Chile]
101 PTPE-0060QSZZ - AC C OC glass tape 1st lot
102 PGSK-0034QSZZ - AE C OC gasket 1st lot
PGSK-0034QSZZ - AE C OC gasket [to No.107] 07/10
103 PSHEZ0590QSPZ - AE N C Glass tape F [Except AL-2020/AL-2021] 1st lot
104 LPLTM0410QSZZ - AD N C Glass earth plate [Except AL-2020/AL-2021] 1st lot
105 PSHEZ0591QSPZ - AE N C Glass tape F [Except AL-2020/AL-2021] 1st lot
106 PSHEZ0588QSPZ - AF N C Left cabinet sheet 1st lot
PSHEZ0588QSPZ - AF N C Left cabinet sheet [AL-2021/AL-2031/AL-2041/AL-2051] 10/07
107 PGSK-0043QSZZ - AC C OC gasket [from No.102] 07/10
108 PSHEZ0580QSZZ AB C OP FFC h t [Missing illust] 1st lot

Update : 2010/11/30
1Exteriors
1Exteriors
NO. PARTS CODE Inter-
change PRICE RANK NEW MARK PART RANK DESCRIPTION TR No. Effective
time
109 PTPE-0060QSZZ - AC C OC glass tape [AL-2030/AL-2040CS North America] 1st lot
110 PGSK-0034QSZZ - AE C OC gasket [AL-2030/AL-2040CS North America] 1st lot
PGSK-0034QSZZ - AE C OC gasket [to No.111] 07/10
111 PGSK-0043QSZZ - AC C OC gasket [from No.110] 07/10
501 CFIX-0027RS51 BA N E Table unit [Except AL-2021/AL-2031/AL-2041/AL-2051]
CFIX-0027RS56 AZ N E Table unit [AL-2021/AL-2031/AL-2041/AL-2051]
PRP03371
501
25
1
2
3
4
18
9
9
16
5
5
27
21
20
19
5
5
5
9
11
9
10
13 158
6
14
12
28
17
9
28
101
26
23
7
106
102
102
102
102
(107)
(107)
110
(111)
(111)
109
103
105
110
110
22
104
104
110
108
29
AL-2050CS
AL-2050
AL-2060
2
AL-2050CS
AL-2050
AL-2060
27