Sharp MX-M550U User manual

SERVICE MANUAL
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with
specified ones for maintaining the safety and performance of the set.
This document has been published to be used
for after sales service only.
The contents are subject to change without notice.
SHARP CORPORATION
NOTE FOR SERVICING
[1] PRODUCT OUTLINE . . . . . . . . . . . 1-1
[2] SPECIFICATIONS . . . . . . . . . . . . . 2-1
[3] CONSUMABLE PARTS . . . . . . . . . 3-1
[4] UNPACKING AND INSTALLATION
* For unpacking and installation, refer to
the installation manual (00ZAR700//I1E).
[5] EXTERNAL VIEW AND INTERNAL
STRUCTURE . . . . . . . . . . . . . . . . . 5-1
[6] ADJUSTMENTS . . . . . . . . . . . . . . . 6-1
[7] SIMULATION . . . . . . . . . . . . . . . . . 7-1
[8]
SELF DIAG AND TROUBLE CODE .8-1
[9] MAINTENANCE . . . . . . . . . . . . . . . 9-1
[10] ROM VERSION-UP . . . . . . . . . . . .10-1
[11] ELECTRICAL SECTION. . . . . . . . .11-1
[12] OTHERS. . . . . . . . . . . . . . . . . . . . .12-1
●DETAILS OF EACH SECTION
[A] EXTERNAL OUTFIT . . . . . . . . . . . . A-1
[B] OPERATION PANEL . . . . . . . . . . . B -1
[C] DSPF SECTION . . . . . . . . . . . . . . . C-1
[D] SCANNER SECTION . . . . . . . . . . . D-1
[E]
MANUAL PAPER FEED SECTION . . E -1
[F] TRAY PAPER FEED SECTION . . . F -1
[G] PAPER TRANSPORT SECTION . . G-1
[H] DUPLEX SECTION . . . . . . . . . . . . H-1
[ i ] LSU SECTION . . . . . . . . . . . . . . . . i -1
[J] PHOTOCONDUCTOR SECTION . . J -1
[K] TONER SUPPLY SECTION . . . . . . K-1
[L] DEVELOPING SECTION . . . . . . . . L -1
[M] TRANSFER SECTION . . . . . . . . . . M-1
[N] FUSING SECTION . . . . . . . . . . . . . N -1
[O] PAPER EXIT SECTION . . . . . . . . . O-1
[P] DRIVE SECTION . . . . . . . . . . . . . . P -1
[Q] PWB SECTION. . . . . . . . . . . . . . . . Q -1
[R] FAN AND FILTER SECTION . . . . . R-1
[S] SENSOR, SWITCH SECTION . . . . S-1
CODE: 00ZMXM700/S2E
CONTENTS
MX-M550N/M550U
MX-M620N/M620U
MX-M700N/M700U
DIGITAL MULTIFUNCTIONAL
SYSTEM
MODEL

CONTENTS
NOTE FOR SERVICING
1. Precautions for servicing . . . . . . . . . . . . . . . . . . . . . . . . i
2. Warning for servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . i
3. Installing site recommendations . . . . . . . . . . . . . . . . . . . i
[1] PRODUCT OUTLINE
1. Different points of MX-M550/620/700 series from
AR-M550/620/700 series . . . . . . . . . . . . . . . . . . . 1- 1
2. Main Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1- 1
3. Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1- 1
4. CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . 1- 4
[2] SPECIFICATIONS
1. Basic specifications . . . . . . . . . . . . . . . . . . . . . . . 2- 1
2. Functional specifications. . . . . . . . . . . . . . . . . . . . 2- 4
3. Environmental conditions.. . . . . . . . . . . . . . . . . . . 2- 11
[3] CONSUMABLE PARTS
1. Supply system table . . . . . . . . . . . . . . . . . . . . . . . 3- 1
2. Maintenance parts list . . . . . . . . . . . . . . . . . . . . . . 3- 2
[4] UNPACKING AND INSTALLATION
* For unpacking and installation, refer to the installation man-
ual (00ZAR700//I1E).
[5] EXTERNAL VIEW AND INTERNAL STRUCTURE
1. Identification of each section and functions . . . . . 5- 1
[6] ADJUSTMENTS
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6- 1
2. Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6- 1
3. Adjustment item list. . . . . . . . . . . . . . . . . . . . . . . . 6- 1
4. Datails of adjustment . . . . . . . . . . . . . . . . . . . . . . 6- 2
[7] SIMULATION
1. Adjustment value/Simulation and storage data. . . 7- 1
2. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7- 2
3. List of simulation codes . . . . . . . . . . . . . . . . . . . . 7- 4
4. Details of simulation . . . . . . . . . . . . . . . . . . . . . . . 7- 8
[8] SELF DIAG AND TROUBLE CODE
1. Self diag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8- 1
2. Trouble code list . . . . . . . . . . . . . . . . . . . . . . . . . . 8- 4
3. Details of trouble code . . . . . . . . . . . . . . . . . . . . . 8- 6
[9] MAINTENANCE
1. Maintenance system table . . . . . . . . . . . . . . . . . . 9- 1
2. Details of maintenance . . . . . . . . . . . . . . . . . . . . . 9- 4
3. Other related items . . . . . . . . . . . . . . . . . . . . . . . . 9- 13
[10] ROM VERSION-UP
1. General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 1
2. Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 2
3. Necessary items for Flash ROM version-up . . . . . 10- 2
4. Flash ROM version-up method. . . . . . . . . . . . . . . 10- 2
5. Turning OFF the power during the version-up
procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10- 5
6. Version-up procedure flowchart . . . . . . . . . . . . . . 10- 5
[11] ELECTRICAL SECTION
1. Block diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 1
2. Power line chart . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 5
3. Actual wiring chart . . . . . . . . . . . . . . . . . . . . . . . . 11 - 8
4. Signal name list . . . . . . . . . . . . . . . . . . . . . . . . . . 11 - 18
[12] OTHERS
1. System settings . . . . . . . . . . . . . . . . . . . . . . . . . . 12- 1
2. Web setting service mode. . . . . . . . . . . . . . . . . . . 12- 8
3. Paper JAM code . . . . . . . . . . . . . . . . . . . . . . . . . . 12- 10
●DETAILS OF EACH SECTION
[A] EXTERNAL OUTFIT . . . . . . . . . . . . . . . . . . . . . . . . . A- 1
[B] OPERATION PANEL
1. Electrical and mechanism relation diagram . . . . . B- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . B- 2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . B- 2
[C] DSPF SECTION
1. Electrical and mechanism relation diagram . . . . . C- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . C- 5
3. Disassembly and assembly . . . . . . . . . . . . . . . . . C- 6
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-19
[D] SCANNER SECTION
1. Electrical and mechanism relation diagram . . . . . D- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . D- 2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . D- 4
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . D- 11
[E] MANUAL PAPER FEED SECTION
1. Electrical and mechanism relation diagram . . . . . E- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . E- 2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . E- 2
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . E- 8
[F] TRAY PAPER FEED SECTION
1. Electrical and mechanism relation diagram . . . . . F- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . F- 5
3. Disassembly and assembly . . . . . . . . . . . . . . . . . F- 8
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-17
[G] PAPER TRANSPORT SECTION
1. Electrical and mechanism relation diagram . . . . . G- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . G- 5
3. Disassembly and assembly . . . . . . . . . . . . . . . . . G- 5
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . G-14
[H] DUPLEX SECTION
1. Electrical and mechanism relation diagram . . . . . H- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . H- 2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . H- 4
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . H-12
[ i ] LSU SECTION
1. Electrical and mechanism relation diagram . . . . . i- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . i- 2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . i- 2
[J] PHOTOCONDUCTOR SECTION
1. Electrical and mechanism relation diagram . . . . . J- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . J- 3
3. Disassembly and assembly . . . . . . . . . . . . . . . . . J- 4
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . J- 9
[K] TONER SUPPLY SECTION
1. Electrical and mechanism relation diagram . . . . . K- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . K- 2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . K- 3
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . K- 4
[L] DEVELOPING SECTION
1. Electrical and mechanism relation diagram . . . . . L- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . L- 2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . L- 2
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . L- 5
[M] TRANSFER SECTION
1. Electrical and mechanism relation diagram . . . . . M- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . M- 2
3. Disassembly and assembly . . . . . . . . . . . . . . . . . M- 3
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . M- 5

CONTENTS
[N] FUSING SECTION
1. Electrical and mechanism relation diagram . . . . N- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . N- 2
3. Disassembly and assembly . . . . . . . . . . . . . . . . N- 3
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . N-12
[O] PAPER EXIT SECTION
1. Electrical and mechanism relation diagram . . . . O- 1
2. Operational descriptions . . . . . . . . . . . . . . . . . . . O- 2
3. Disassembly and assembly . . . . . . . . . . . . . . . . O- 2
4. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . O- 7
[P] DRIVE SECTION
1. Disassembly and assembly . . . . . . . . . . . . . . . . P- 1
2. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . P-14
[Q] PWB SECTION
1. Disassembly and assembly . . . . . . . . . . . . . . . . Q- 1
[R] FAN AND FILTER SECTION
1. Disassembly and assembly . . . . . . . . . . . . . . . . R- 1
2. Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . R- 6
[S] SENSOR, SWITCH SECTION
1. Disassembly and assembly . . . . . . . . . . . . . . . . S- 1

MX-M700N NOTE FOR SERVICING - i
MX-M700N 5GTXKEG/CPWCN

NOTE FOR SERVICING
This Service Manual uses some symbols to assure safe operation.
Please understand the meanings of photographs before servicing.
1. Precautions for servicing
1) When servicing, disconnect the power plug, the printer cable,
the network cable, and the telephone line from the machine,
except when performing the communication test, etc.
It may cause an injury or an electric shock.
2) There is a high temperature area inside the machine. Use an
extreme care when servicing.
It may cause a burn.
3) There is a high voltage section inside the machine which may
cause an electric shock. Be careful when servicing.
4) Do not disassemble the laser unit. Do not insert a reflective
material such as a screwdriver in the laser beam path.
It may damage eyes by reflection of laser beams.
5) When servicing with the machine operating, be careful not to
squeeze you hands by the chain, the belt, the gear, and other
driving sections.
6) Do not leave the machine with the cabinet disassembled.
Do not allow any person other than a serviceman to touch
inside the machine. It may cause an electric shock, a burn, or
an injury.
7) When servicing, do not breathe toner, developer, and ink
excessively. Do not get them in the eyes.
If toner, developer, or ink enters you eyes, wash it away with
water immediately, and consult a doctor if necessary.
8) The machine has got sharp edges inside. Be careful not to
damage fingers when servicing.
9) Do not throw toner or a toner cartridge in a fire. Otherwise,
toner may pop and burn you.
10) When replacing the lithium battery of the PWB, use a specified
one only.
If a battery of different specification is used, it may be broken,
causing breakdown or malfunction of the machine.
11) When carrying a unit with PWB or electronic parts installed to
it, be sure to put it in an anti-static-electricity bag.
It may cause a breakdown or malfunctions.
2. Warning for servicing
1) Be sure to connect the power cord only to a power outlet that
meets the specified voltage and current requirements.
Avoid complex wiring, which may lead to a fire or an electric
shock.
It may cause a fire or an electric shock.
2) If there is any abnormality such as a smoke or an abnormal
smell, interrupt the job and disconnect the power plug.
It may cause a fire or an electric shock.
3) Be sure to connect the grounding wire. If an electric leakage
occurs without grounding, a fire or an electric shock may
result.
To protect the machine and the power unit from lightening,
grounding must be made.
4) When connecting the grounding wire, never connect it to the
following points.
It may cause an explosion, a fire or an electric shock.
• Gas tube
• Lightning conductor
• A water pipe or a water faucet, which is not recognized as a
grounding object by the authorities.
• Grounding wire for telephone line
5) Do not damage, break, or work the power cord.
Do not put heavy objects on the power cable. Do not bend it
forcibly or do not pull it extremely.
It may cause a fire or an electric shock.
6) Keep the power cable away from a heat source.
Do not insert the power plug with dust on it into a power outlet.
It may cause a fire or an electric shock.
7) Do not put a receptacle with water in it or a metal piece which
may drop inside the machine.
It may cause a fire or an electric shock.
8) With wet or oily hands, do not touch the power plug, do not
insert the telephone line jack, do not operate the machine, or
do not perform servicing.
It may cause an electric shock.
3. Installing site recommendations
Do not install the machine at the following sites.
1) Place of high temperature, high humidity, low tempera-
ture, low humidity, place under an extreme change in tem-
perature and humidity.
Paper may get damp and form dews inside the machine, caus-
ing paper jam or copy dirt.
For operating and storing conditions, refer to the specifications
described later.
2) Places of too much vibrations
It may cause a breakdown.
WARNING: If this WARNING should be ignored, a serious
danger to life or a serious injury could result.
CAUTION: If this CAUTION should be ignored, an injury or
a damage to properties could result.

MX-M700N NOTE FOR SERVICING - ii
3) Poorly ventilated areas
An electro-static type copier will produce ozone inside it.
The quantity of ozone produced is designed to a low level so
as not to affect human bodies. However, continuous use of
such a machine may produce a smell of ozone. Install the
machine in a well ventilated place, and ventilate occasionally.
4) Place of direct sunlight.
Plastic parts and ink may be deformed, discolored, or may
undergo qualitative change.
It may cause a breakdown or copy dirt.
5) Place which is full of organic gases such as ammonium
The organic photoconductor (OPC) drum used in the machine
may undergo qualitative change due to organic gases such as
ammonium.
Installation of this machine near a diazo-type copier may result
in dirt copy.
6) Place of too much dust
When dust enters the machine, it may affect the operation of
the machine.
7) Place too close to a wall
All machines require clean intake and exhaust of air. If the
intake and exhaust of air are not proper, failure of the machine
will occur.
8) Unstable or uneven surfaces
Placement of the machine will affect performance.
An unstable machine may fall over and cause an injury.
Use the proper optional desk unit. When using the optional
desk, be sure to lock the adjusters and casters.
6-1/8"
(15cm)
23-5/8"
(60cm)
11-13/16"
(30cm)

MX-M700N PRODUCT OUTLINE 1 – 1
MX-M700N 5GTXKEG/CPWCN

[1] PRODUCT OUTLINE
1. Different points of MX-M550/620/700
series from AR-M550/620/700 series
• Adopted new operation panel with 8.9 inch LCD
• Added web roller and motor for web roller in Fusing section
• Added firmware version-up using USB device by Sim 49-1
• Eliminated parallel port
2. Main Features
A. Single Pass Duplex Scanner
• Max. 76 cpm for duplex scanning
• Best-in-class 150-sheet feeder
B. Security Solution
Data encryption + data clear with random number
• Network security
C. New Toner
• Higher density/Finer particles
D. Inner Output
• Separate copy output pages from printer output pages
E. Enhance the solutions such as document
filing and other features.
F. Design for High Reliability
• Robust frame designed by highly accurate CAE analysis
G. Improved Performance
• Network Tandem Copy/Print
• High-speed Processor
• New high-speed ASIC
H. Fax feature
For replacement of mid/low speed devices (up to area)
I. Large Capacity Finisher
Finisher capacity: 4,000-sheet
3. Features
A. High reliability
(1) Improved Image Quality/Paper Transport
Full-Grip Path Design
Stable paper feeding realized by rollers that firmly grip paper
Small-Diameter Belt Transfer System
With reduced effect to paper types, drum paper release is stabilized
and transfer efficiency is improved
Easier Paper Jam Fixation with Open Paper Path
Jammed paper on vertical paper path can be easily removed by
opening the left side cover, which shortens time to fix paper jam
(2) Strengthened Frame Structure
Highly Rigid Frame
Improved stability with less machine distortion, and both rigidity and
lightweight been achieved.
(3) Energy Saving with Unique External Heat Roller
Fusing System
Newly Developed External Heating System
1) High reliability with stabilized fusing ability
2) Shortened warm up time before start copying
3) Achievement of energy efficiency that clears 2006 Rationaliza-
tion in Energy Use Law
External Heat Roller Fusing System
B. Network tandem
With Network tandem function, users can output one job on two
network connected engines. Productivity of large-volume copying/
printing can be dramatically improved by high-speed output of up to
110cpm (55cpm model), 124cpm (62cpm model) and 140cpm
(70cpm model).
* Users can use the function simply by connecting the engines to
network. This means no Tandem Kit (Connection cable) neces-
sary.
External Heating
Roller
Thin Steel Fusing
Roller
Low Heat Capacity
Rubber Roller
High Efficiency Heater
Copy
Scan original from
document glass or DSPF
Print
Send print
data from PC

MX-M700N PRODUCT OUTLINE 1 – 2
C. 2-Way Security Solution
(1) Data Security coexisting with Document Filing
Fax data
Copy data
Scan data
Print data
Way-in : Network Security
Allow access of authorized network address only
and prevent unauthorized access from outside.
(Filtering of network address)
Print data
ONLY-ONE
Way-out : HDD Data Clear + Encryption
Data clear by plural writing random number.
Cannot be analyzed even when peeped by encryption.
Document Filing/Quick File
Original data
Print data
Fax data
Document Filing/Quick File
Original data
Print data
Fax data
Store
Install DSK
Install DSK
Security is assured by encrypting the data to be stored!
Security is assured by encrypting the data to be stored!
PIN printing
Password input
Data SecurityData Security
PIN printing
Password input
Store
Store
Recall (Job settings)
Recall (Job settings)
Raw/compressed data
Raw/compressed dataRaw/compressed data
HDD memory
Encrypted dat
aEncrypted data
Encrypt before storing
Recall (Job settings)
Document Filing/Quick File
Original data
Print data
Fax data
PIN printing
Password input
HDD memory
Encrypted dat
a
Encrypted dat
a
Encrypt before storingEncrypt before storing
Recall (Job settings)
Document Filing/Quick File
Original data
Print data
Fax data
PIN printing
Password input
HDD memory
HDD memory

MX-M700N PRODUCT OUTLINE 1 – 3
D. Document Filing
Document filing is a function that enables users to share and reuse
data stored in the engine's HDD by digitalizing various information
sent/scanned from printer, fax, PC or MFP that are connected by
network.
Fax data
Print data
PC
PC Fax
PC i-Fax
PC-Fax is like printing
Word data etc. onto fax
paper.
i-Fax data
Send
HDD Send E-mail
Send E-mail
Print
Copy
Scan
FAX
i-FAX
Internet-Fax
G3 Fax
G3 Fax
Internet Fax
PC
<Document Filing initial screen>
<List of data stored in Main folder
>
Telephone line
Network/LAN
MX-M550N/U
MX-M620N/U
MX-M550N/U
MX-M620N/U
MX-M620N/U
MX-M700N/U

MX-M700N PRODUCT OUTLINE 1 – 4
4. CONFIGURATION
A. Main unit and option lineup
(1) Option lineup
Punch unit
Saddle stitch finisher
Finisher
Inserter
A4 LCC
A3 LCC
55/62/70ppm
Facsimile
expansion kit
Printer function
Standard
Network
expansion
kit
Barcode font kit
FAX momory (8MB)
256MB expansion
memory board
Data security kit
PS3 expansion kit
Network
scanner
expansion kit
Application
communication
module
External
account
module
SHARPDESK
1 (5, 10, 50, 100)
license kit
Application
integration
module kit
Internet FAX
expansion kit
55/62/70ppm

MX-M700N PRODUCT OUTLINE 1 – 5
(2) Option combinations
STD: Standard provision OPT: Installable u: Not installable
B. Block diagram
Section
Option Machine model
Remarks Product
key
Item
Copier model Network printer
MX-M550U/
M620U/M700U
MX-M550N/
M620N/M700N
Paper feed system Large capacity tray (AR-LC6) OPT OPT (A4 / 8.5 u11)
Large capacity tray (AR-LC7) OPT OPT (A3 / 11 u17)
Paper exit system Finisher (AR-F15) OPT OPT
Saddle stitch finisher (AR-F16) OPT OPT
Inserter (AR-CF2) OPT OPT
Punch module (AR-PN4A) OPT OPT (2 holes)
Punch module (AR-PN4B) OPT OPT (3 holes)
Punch module (AR-PN4C) OPT OPT (4 holes)
Punch module (AR-PN4D) OPT OPT (4 holes, wide)
Electrical system
(Printer controller)
Printer expansion kit STD STD
Network expantion kit (MX-NBX1) OPT STD Yes
Expansion memory (AR-SM5) OPT OPT (256MB)
PS3 expansion kit (MX-PKX1) OPT OPT Yes
Barcode font kit (AR-PF1) OPT OPT
Software Network scanner expansion kit (MX-NSX1) OPT OPT Yes
Sharpdesk 1 license kit (MX-USX1) OPT OPT
Sharpdesk 5 license kit (MX-USX5) OPT OPT
Sharpdesk 10 license kit (MX-US10) OPT OPT
Sharpdesk 50 license kit (MX-UX50) OPT OPT
Sharpdesk 100 license kit (MX-USA0) OPT OPT
FAX system Internet FAX expansion kit (MX-FWX1) OPT OPT Yes
Facsimile expansion kit (AR-FX8) OPT OPT
FAX expansion memory (8MB) (AR-MM9) OPT OPT
Other options Application integration module kit (MX-AMX1) OPT OPT Yes
Application communication module (MX-AMX2) OPT OPT Yes
External account module (MX-AMX3) OPT OPT Yes
DSPF Unit (CIS)
Image Scanner (reading) Section (CCD)
Operating Section
Scanner Control PWB Engine Control Section
(PCU PWB)
Toner Bottle
Finisher
(Option)
Scanner(writing)
(LSU) Section
Drum Section
Developer SectionTransfer Section
Paper Feed Tray 4
Paper Feed Tray 1 Paper Feed Tray 2
Paper Feed Tray 3
Toner Hopper
DC Power Unit
AC Power Unit
Paper Transport Section
Large Capacity
Paper Tray Unit
(Option)
ADU Section
Fusing Section
MFP Control PWB
Punch Unit
(Option)
Inserter
(Option)
Fax unit (Option)
Telephone Line
Manual Paper
Feed Tray
USB
Port
Network
Port
Paper Exit and switch
back Section
HDD

MX-M700N SPECIFICATIONS 2 – 1
MX-M700N 5GTXKEG/CPWCN

[2] SPECIFICATIONS
1. Basic specifications
A. Base engine
(1) Type
(2) Engine speed (ppm)
(3) Engine composition
(4) Engine resolution
(5) Warmup
(6) Jam recovery time
(7) Printable area
(8) Image defect
a. Void area/Image loss
(9) Power source
(10) Power consumption
* : With full options
(11) Dimensions
(12) Weight
(13) Dimensions occupied by Machine
Type Console
Copy mode Monochrome digital
(Electronic photo graphic)
Paper size 55ppm 62ppm 70ppm
A4, 8.5 ✕11 55ppm 62ppm 70ppm
A4R, 8.5 ✕11R 40ppm 45ppm 48ppm
A5R/5.5 ✕8.5R
5.5 ✕8.5-R 40ppm 45ppm 48ppm
B5 55ppm 62ppm 70ppm
B5R, 7.25 ✕10.5-R 40ppm 45ppm 48ppm
B4/8.5 ✕14 35ppm 39ppm 45ppm
A3/11 ✕17 30ppm 34ppm 39ppm
Extra 30ppm 34ppm 39ppm
Postcard Since the next paper is fed after completion
of paper exit outside the machine, it
depends on the machine composition.
Photoconductor kind OPC (Drum diameter: I80mm)
Copying method Electronic photo (Laser)
Developing system Dry, 2-component magnetic brush
development
Charging system Charged saw-tooth method
Transfer system Static electricity transfer
(Transfer belt method)
Cleaning system Counter blade
Fusing system Heat roller
Fused cleaning system WEB cleaning method
Toner supply method Toner supply by the front cover open
Waste toner disposal Toner cartridge collection
(No toner recycling system)
Resolution (Writing) Copy : 600 ✕600dpi
Printer:
PCL: 600 ✕600dpi, 300 ✕300dpi
PS : 600 ✕600dpi
Smoothing Copy: None
Printer:
Model of 55/62 sheets:
Equivalent to1200dpi ✕600dpi (PCL/PS)
Model of 70 sheets : None
Gradation [Writing] 2 gradations
After turned on 120 seconds or less
Pre-heat YES
Jam recovery time Approx. 30 sec. (After leaving the machine
with the side cover open for 60sec, in the
standard condition and the polygon stop
conditions.)
A3 289 ✕412mm 11 ✕17 271 ✕424mm
B4 242 ✕356mm 8.5 ✕14 208 ✕348mm
A4 202 ✕289mm 8.5 ✕13 208 ✕322mm
B5 174 ✕249mm 8.5 ✕11 208 ✕271mm
A5 140 ✕202mm 5.5 ✕8.5 132 ✕208mm
7.25 ✕10.5 183 ✕259mm 8K 262 ✕382mm
Postcard 92 ✕140mm 16K 187 ✕262mm
Void area/Image
loss
Lead edge: 40mm or less
Rear edge: 4.0mm or less
FR total : 8.0mm or less
100V series 200V series
Voltage 100 to 127V 200 to 240V
Current 55 ppm 16A 8A
62 ppm 16A 8A
70 ppm 16A 8A
Frequency 50/60Hz
Power source code Dedicated outlet
Power switch 2 switches (Primary switch: in the front cover;
Seconday switch: on side of the main unit)
100V series 200V series
Low power consumption
mode
55 ppm : max. 261.75W
6 2 p p m : m a x . 2 8 8 . 7 W
7 0 p p m : m a x . 3 1 9 . 5 W
Maximum rated power
consumption 1.80KW (*) 1.84KW (*)
Reset time from low power
mode 30 sec.
Power consumption in the
off mode 95W or less
Shift time to off mode 90 min.
Outer dimensions 728 ✕679 ✕1050mm
(Height: Floor to Glass surface)
728 ✕679 ✕1192mm
(Height: Floor to SPF top)
Footprint 728 (W) ✕679 (D) mm
Main unit Approx. 185kg / 408lbs
Main unit 1264 ✕679 ✕1192mm
Main unit + A4-LCC installed 1340 ✕679 ✕1192mm
Main unit + finisher/
Saddle finisher installed 1797 ✕679 ✕1192mm
Main unit + A4-LCC + finisher/
Saddle finisher installed 1873 ✕679 ✕1192mm
Main unit + Inserter + Finisher/
Saddle finisher 2079 ✕679 ✕1192mm
Main unit + A4-LCC + Inserter +
Finisher/Saddle finisher installed 2155 ✕679 ✕1192mm
Main unit + A3-LCC installed 1660 ✕679 ✕1192mm
Main unit + A3-LCC + finisher/
Saddle finisher installed 2193 ✕679 ✕1192mm
Main unit + A3-LCC + inserter +
finisher/ Saddle finisher installed 2475 ✕679 ✕1192mm

MX-M700N SPECIFICATIONS 2 – 2
B. Paper feed, paper transport, and paper exit section
(1) [Paper feed section]
(2) Paper feed tray of the main unit
a. Tray1 (Left tray in the parallel LCC)
* Time required from tray insertion to empty detection when paper is empty.
b. Tray2 (Right tray in the parallel LCC)
* : Time required from tray insertion to empty detection when paper is empty.
c. Tray3 (multi-purpose tray)
* 105g/m2or above, A4/8.5 ✕11 or less. For 128g/m2or above, horizontal feed only.
d. Tray 4 (500 sheets paper feed tray)
* 1: 105g/m2or above, A4/8.5 ✕11 or less. For 128g/m2or above, horizontal feed only.
* 2: For multi copy and back surface copy, single feed only.
Type 4-stage paper feed tray
(Parallel LCC + 2 tray + Multi manual paper feed)
Paper feed method Paper is fed from the above by the front loading system.
Dehumidification heater Service parts
Paper size Paper size change
method
Paper
type
setting
Paper size
setting when
shipping
Allowable
paper type and
weight for
paper feed
Paper
capacity
(Standard
paper)
Paper type
Paper
remaining
detection
Tray lift time
Up Down
AB (Europe, SCA):
A4, 8.5 ✕11
AB (Other):
A4, 8.5 ✕11
Inch: 8.5 ✕11, A4
(Supported by the
guide change and
the software setting)
Size setting by user YES Inch: 8.5 ✕11
AB: A4
Plain paper:
60 to 105g/m2
(16 to 28lbs)
800
sheets
(80g/m2)
Normal paper,
printed paper,
recycled
paper,
letterhead,
punched
paper, color
paper
Enable
(Paper
empty and
3 steps)
Within
12sec
(*)
Free
fall
Paper size Paper size change
method
Paper
type
setting
Paper size
setting when
shipping
Allowable
paper type and
weight for
paper feed
Paper
capacity
(Standard
paper)
Paper type
Paper
remaining
detection
Tray lift time
Up Down
AB (Europe, SCA):
A4, 8.5 ✕11
AB (Other):
A4, B5, 8.5 ✕11
Inch: 8.5 ✕11, A4
(Supported by the
guide change and
the software setting)
A4: User can change
8.5 ✕11:
User can change
B5:
Size setting by
serviceman (B5 available
through bolt fixing and
setting by serviceman)
YES Inch: 8.5 ✕11
AB: A4
(16K is not
supported)
Plain paper:
60 to 105g/m2
(16 to 28lbs)
1200
sheets
(80g/m2)
Normal paper,
printed paper,
recycled
paper,
letterhead,
punched
paper, color
paper
Enable
(Paper
empty and
3 steps)
Within
12sec
(*)
Free
fall
Paper size
Paper size
change
method
Paper
type
setting
Paper size
setting when
shipping
Allowable paper type
and weight for paper
feed
Paper capacity
Paper type
Paper
remaining
detection
Normal
paper OHP
Auto AB: A3, B4, A4, A4R, B5,
B5R, A5R, 8.5 ✕13
Auto inch: 11 ✕17, 8.5 ✕14,
8.5 ✕11, 8.5 ✕11R,
7.25 ✕10.5R, 5.5 ✕8.5R
Manual: 8K, 16K, 16KR
Special size
:[Vertical]
139 to 297mm (5.5 to 11-5/8)
[Horizontal]
139 to 431mm (5.5 to 17)
(Tab paper is of A4; limited to
tab width 12mm to 20mm/8.5 ✕
11; tab width 6.1mm to 17mm.)
Guide
adjustment
by user
YES Shipped with
the paper
guide width at
Max.
Plain paper:
60 to 105g/m2
(16 to 28lbs)
Thick paper:
106 to 128g/m2
(29 to 34lbs)
176g/m2(65lbs)
Cover
205g/m2
(110lbs) Index(*)
500 sheets
(80g/m2)
40
sheets
Normal paper,
printed paper,
recycled paper,
letterhead,
punched paper,
color paper,
label paper,
thick paper, OHP,
tab paper
Enable
(Paper
empty and
3 steps)
Paper size
Paper size
change
method
Paper
type
setting
Paper size
setting when
shipping
Allowable paper type and
weight for paper feed
Paper capacity
(Standard
paper)
Paper type
Paper
empty
detection
Auto AB: A3, B4, A4, A4R, B5,
B5R, 8.5 ✕13
Auto inch: 11 ✕17, 8.5 ✕14,
8.5 ✕11, 8.5 ✕11R,
7.25 ✕10.5R
Manual: 8K, 16K, 16KR
Custom size: None
Guide
adjustment
by user
YES Shipped with
the paper
guide width at
Max.
Plain paper:
60 to 105g/m2(16 to 28lbs)
Thick paper:
106 to 128g/m2(29 to 34lbs)
176g/m2(65lbs) Cover
205g/m2(110lbs)Index
(*1),(*2)
500 sheets
(80g/m2)
Normal paper,
recycled paper,
printed paper,
letterhead,
punched paper,
color paper,
thick paper
Enable
(Paper
empty and
3 steps)

MX-M700N SPECIFICATIONS 2 – 3
(3) Bypass tray
* 105g/m2or above, A4/8.5 ✕11 or less. For 128g/m2or above, horizontal feed only.
(4) Duplex (5) Paper exit size / type
C. Scanner section
(1) Resolution/Gradation
* Except for FAX sending
Paper size
Paper size
change
method
Paper
type
setting
Allowable paper type and weight
for paper feed
Paper capacity
(Standard paper) Paper type
Paper
empty
detection
Auto AB: A3, B4, A4, A4R, B5,
B5R, A5R, 8.5 ✕13, Postcard
Auto inch: 11 ✕17, 8.5 ✕14,
8.5 ✕13, 8.5 ✕11, 8.5 ✕11R,
7.25 ✕10.5R, 5.5 ✕8.5R
Manual: 8K, 16K, 16KR
Custom size:
[Vertical]
100 to 297mm (3.9 to 11-5/8)
[Horizontal]
139 to 432mm (5.5 to 17)
Guide
adjustment by
user
YES Thin paper:
52 to 59g/m2(14 to 15lbs)
(single feed only)
Plain paper:
60 to 105g/m2(16 to 28lbs)
Thick paper:
106 to 128g/m2(29 to 34lbs)
176g/m2(65 - lbs) Cover
205g/m2(110lbs) Index (*)
Plain paper:
100 sheets
(standard paper:
80g/m2)
Postcard: 20 sheets
OHP: 20 sheets
Normal paper,
recycled paper,
printed paper,
punched paper,
color paper,
letterhead, thin
paper, label paper,
thick paper, OHP,
tab paper (tab width
20mm or less),
Postcard
YES
System Non stack system
Paper size A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K,
16KR, 11 ✕17, 8.5 ✕14, 8.5 ✕13.4, 8.5 ✕13,
8.5 ✕11, 8.5 ✕11R, 8.5 ✕5.5R, 7.25 ✕10.5R
Type and weight of
paper which can be
passed
Plain paper: 60 to 105g/m2(16 to 28lbs)
Thick paper: 106 to 128g/m2(29 to 34lbs)
176g/m2(65 - lbs) Cover
205g/m2(110lbs) Index
Paper type Plain paper, printed paper, recycled paper,
letterhead, punched paper, color paper, thick
paper
Paper exit position/
system
Main unit top surface face-down paper exit
Paper exit capacity 250 sheets (80g/m2paper)
Paper exit paper size/kind All kinds of paper which can be fed
Remaining paper
detection
None
Paper exit paper full
detection
Provided
copy mode
Platen Magnification ratio 25 to 99 Normal ratio 101 to 171 172 to 400
Scan resolution (dpi) 600 ✕600 600 ✕600 600 ✕600 600 ✕(600 ✕2)
DSPF Magnification ratio 25 to 99 Normal ratio 101 to 117 118 to 200
Scan
resolution
(dpi)
When in single copy 600 ✕367 600 ✕367 600 ✕367 600 ✕600
SPF duplex (front) CCD 600 ✕600 600 ✕600 600x
(600 ✕2)
600x
(600 ✕2)
SPF duplex (back) CIS 600 ✕300 600 ✕300 600 ✕600 600 ✕600
When in the Fax send mode and the scanner FAX broadcast mode
Select mode Standard Fine text Super fine test Ultra fine text 600dpi send (*)
Input and send
resolution (dpi)
Input resolution: OC 600 ✕600 600 ✕600 600 ✕600 600 ✕600
Input resolution: DSPF simplex 600 ✕367 600 ✕367 600 ✕367 600 ✕367
Input resolution: DSPF duplex (front) CCD 600 ✕600 600 ✕600 600 ✕600 600 ✕600
Input resolution: DSPF duplex (back) CIS 600 ✕300 600 ✕300 600 ✕300 600 ✕300
Transmission
resolution
FAX 203.2 ✕97.8 203.2 ✕195.6 203.2 ✕391 406.4 ✕391 —
Internet FAX 200 ✕100 200 ✕200 200 ✕400 400 ✕400 600 ✕600
Scanner mode
Select mode 200 ✕200 300 ✕300 400 ✕400 600 ✕600
Input and send
resolution (dpi)
Input resolution: OC 600 ✕600 600 ✕600 600 ✕600 600 ✕600
Input resolution: DSPF simplex 600 ✕367 600 ✕367 600 ✕367 600 ✕367
Input resolution: DSPF duplex (front) CCD 600 ✕600 600 ✕600 600 ✕600 600 ✕600
Input resolution: DSPF duplex (back) CIS 600 ✕300 600 ✕300 600 ✕300 600 ✕300
Transmission resolution 200 ✕200 300 ✕300 400 ✕400 600 ✕600
Exposure lamp None-electrode xenon lamp (Front), LED (Back)
Scanning 256 gradations (8bit)
Printing 2 gradations (1bit)

MX-M700N SPECIFICATIONS 2 – 4
(2) Document table
(3) Automatic document feeder
D. Fuser section
(1) Type
2. Functional specifications
A. Copy functions
(1) Copy speed (Continuous copy speed) (cpm)
a. Tray 1 to 4, LCC (Reduction/Normal/Enlargement)
(2) First copy time
* Measurement conditions: Feeding A4/8.5 ✕11 paper from the
main unit tray. Polygon in rotation.
(3) Job speed
a. BLI standards
* S to S: A4/8 ✕11 documents 10 sheets, copy 5 sets
* S to D: A4/8 ✕11 documents 10 sheets, copy 5 sets
* D to D: A4/8 ✕11 documents 10 sheets (20 pages), copy 5 sets
(4) Continuous copy
(5) Resolution
(6) Copy document
(7) Copy magnification ratio
(8) Density, copy image quality processing
Scanning area 297 ✕431.8mm
Original
standard
position
Left bottom reference
Detection Provided
detection size Automatic detection
(Supported by changeover of the software destination of
one kind of the detection unit.)
Inch series-1 11 ✕17, 8.5 ✕14, 8.5 ✕11, 8.5 ✕11R,
5.5 ✕8.5
Inch series-2 11 ✕17, 8.5 ✕13, 8.5 ✕11, 8.5 ✕11R,
5.5 ✕8.5
AB series-1 A3, B4, A4, A4R, B5, B5R, A5
AB series-2 A3, A4, A4R, B5, B5R, A5, 216 ✕330
AB series-3 B4, A4, A4R, A5, 8K, 16K, 16KR
Manual setting fixed size input:
Min. : 64 ✕64 to Max.297 ✕432mm
Manual
detection size
setting
Provided
Dehumidificati
on heater
(Scanner
section)
Service parts
Type DSPF: Duplex surface scan and feed unit
Scan speed When in single copy When in duplex copy
Copy 65 sheets/min
(600 ✕300 dpi, 1bit)
76 pages/min
(600 ✕300dpi, 1bit)
Fax 46 sheets/min
(Normal text, 1bit)
48 sheets/min
(Normal text, 1bit)
Scanner 59 sheets/min
(200 ✕200dpi, 1bit)
67 sheets/min
(200 ✕200dpi, 1bit)
Internet
FAX
46 sheets/min
(200 ✕100dpi, 1bit)
48 sheets/min
(200 ✕100dpi, 1bit)
Original standard
position
Center reference
Document size Automatic detection
Inch series-1:
11 ✕17, 8.5 ✕14, 8.5 ✕11, 8.5 ✕11R, 8.5 ✕5.5,
A4
Inch series-2 :
11 ✕17, 8.5 ✕13, 8.5 ✕11, 8.5 ✕11R, 8.5 ✕5.5,
A4
AB series-1/-2:
A3, B4, A4, A4R, B5, B5R, A5, 8.5 ✕11, 8.5 ✕13
AB series-3 :
8K, A4, A4R, B4, 16K, 16KR, A5, 8.5 ✕13
Mix paper feed (Same series, same width paper)
enabled
Manual setting Min. 64 ✕64 to Max.297 ✕432mm
(Scan position: Center reference)
Document weight 50 to 128g/m2
14 to 34lbs, 65 lbs Cover (Equivalent of 176g/m2),
110 lbs Index (Equivalent of 205g/m2)
Max. loading
capacity of
documents
Max. 150 sheets (80g/m2) or Max. 19.5mm
System Heat roller pressure system
Copy mode Paper size 55ppm 62ppm 70ppm
Original table
mode
A4, 8.5 ✕11 55 62 70
A4R, 8.5 ✕11R 404548
A5R/5.5 ✕8.5R,
5.5 ✕8.5-R 40 45 48
B5 55 62 70
B5R, 7.25 ✕10.5-R 40 45 48
B4/8.5 ✕14 35 39 45
A3/11 ✕17 30 34 39
Extra 303439
Postcard Since the next paper is fed after
completion of paper exit outside
the machine, it depends on the
machine composition.
Original Cover
/DSPF 55ppm 62ppm 70ppm
Original Cover 4.0 seconds or less 3.5 seconds or less
DSPF 6.2 seconds or less 5.7 seconds or less
55ppm 62ppm 70ppm
S to S 50.1cpm (91%) 56.4cpm (91%) 63.0cpm (90%)
S to D 49.0cpm (89%) 53.3cpm (86%) 58.8cpm (84%)
D to D 51.7cpm (94%) 57.0cpm (92%) 63.0cpm (90%)
Multi max. quantity 999 sheets
Scan resolution 600 ✕600dpi
Writing resolution 600 ✕600dpi
Document size Max. A3
Document type Sheet/Book original
Copy magnification
ratio
AB series: 25%, 50%, 70%, 81%, 86%, 100%,
115%, 122%, 141%, 200%, 400%
Inch series: 25%, 50%, 64%, 77%, 100%,
121%, 129%, 200%, 400%
Zoom 25 to 400% (25 to 200% for DSPF)
Preset magnification
ratio
4
Exposure mode Binary: Text (auto/manual), Text/Photo, photo,
auto
Number of manual
steps
9 steps
Toner save mode Provided

MX-M700N SPECIFICATIONS 2 – 5
(9) Paper size
(10) Copy functions
B. Image send function
(1) Mode
* Conforming to PC-FAX/PC-internet fax
(2) Image send function (Push from the main unit)
a. Support system
SMTP, POP3 and FTP support SSL. (Web support)
b. Support image
c. Image process
Paper
type
Standard size Standard size
Min. Max.
AB
series
A6 (A6R)
Postcard A3 A3, B4, A4, A4R, B5, B5R, A5R, 8K, 16K, 16KR, Postcard
Inch
series 8.5 ✕5.5 11 ✕17
11 ✕17, 8.5 ✕14, 8.5 ✕13,
8.5 ✕11, 8.5 ✕11R,
7.25 ✕10.5R, 5.5 ✕8.5R
Function
(Special
function)
Automatic paper selection Yes
Automatic magnification
ratio selection Yes
Vertical/horizontal
independent
magnification ratio
Yes
Paper type select Yes
Auto tray switching Yes
Rotation copy Yes
Electronic sort Yes
Rotation sort Yes (Europe, SCA, Dealer area)
Job reservation Yes (99 items)
Program call/register Yes (10 items)
Document filing Yes
Preheat function Yes
(Conditions set up
by system setting)
Auto power shut off
function
Yes
(Conditions set up
by system setting)
User management (Dept.
management) Yes (500 users)
Process control Yes
Indefinite document size
input Yes
Indefinite paper size input Yes (Tray 3/manual paper feed)
Mixed document feeder Yes (MIX only)
Binding margin Yes (Left/Right)
Border erase/Center
erase
Yes
(Border/Center/Border+Center)
2 in 1 Yes
Tandem copy Yes
(Network interface is required)
Cover/Insert paper/Tab
insert paper Yes
OHP insert paper Yes
Tab copy Yes
2in1/4in1 Yes (Centering provided)
Card shot Yes (Centering provided)
Center binding Yes (Centering provided)
Book copy Yes
Duplex copy system
switch Yes
Large volume document
mode
Yes (Max. 10000 sheets)
Magnification ratio/ Density/
Paper can be changed for every
bundle.
Black-white reversion Yes (except UK)
Mirror image Yes
Date print Yes
Stamp Yes
Page print Yes
Character print Yes
Scanner Scan to E-mail
Scan to Desktop
(Scan data send without depending on the IP address under
the DHPC environment)
Scan to FTP
Scan to Folder (SMB)
Scan to e-mail with Meta
Scan to Desktop with Meta
Scan to FTP with Meta
Scan to SMB with Meta
Fax Fax
Fax to E-mail (inbound Routing)
Fax to FTP/Desktop/SMB/E-mail (Document Admin)
Internet
Fax
Internet Fax (Supported full mode)
Internet Fax to E-mail (inbound routing)
Internet Fax to FTP/Desktop/SMB/E-mail
(Document Admin) (*)
Item Scanner Internet Fax
Corresponding
server/protocol
SMTP
FTP(TCP/IP)
SMB
POP server
SMTP server
ESMTP server
Item Scanner Internet Fax Fax
File format TIFF, PDF TIFF-FX (TIFF-F) —
Compression
system
•Non-
compression
•G3
(1-dimensional)
= MH (Modified
Huffman)
•G4
= MMR
(Modified MR)
MH, MMR MH, MR,
MMR, JBIG
Item Scanner Internet Fax Fax
half tone
reproduction Equivalent of 256 steps
Density
adjustment Auto + 5 steps
Image quality
selection Half tone ON/OFF
Resolution
(depends on
file format/
transmission
method)
200 ✕200dpi Standard
(200 ✕100dpi)
(middle tone not
allowed)
Standard
(203.2
✕97.8dpi)
(middle tone
not allowed)
Fine
(200 ✕200dpi)
Fine
(203.2
✕195.6dpi)
300 ✕300 dpi Super fine
(200 ✕400dpi)
Super fine
(203.2
✕391dpi)
400 ✕400 dpi Ultra fine
(400 ✕400dpi)
Ultra fine
(406.4
✕391dpi)
600 ✕600 dpi 600 ✕600dpi —

MX-M700N SPECIFICATIONS 2 – 6
d. Address specification
e. Multiple address specification
* Direct address input: 10-key other than one-touch, and soft key-
board input
• When broadcasting including FAX, the resolution is that of FAX.
• When broadcasting of the internet FAX and the scanner, the res-
olution is that of the internet FAX.
• The compression type when broadcasting depends on the con-
forming of the system setting.
f. Send function
g. Receive function
Item Scanner Internet Fax Fax
Address
specification
Specified by one-touch, group, or direct address input.
Input from the soft keyboard (Scanner/Internet FAX)
Input the 10-key (Fax)
Selection from LDAP server
Resend
Quick
Setting of
default address
No
Number of One-
touch address
key registration
Max. total 999 items (of which 200 items can be
assigned to FTP, desktop and/or SMB)
Inbound Routing
List
50 items
Inbound routing
addresses
1000 items
Sender Number/
Address
Registration
(Inbound
Routing)
500 items
Number of
Group (1 key)
address
registtation
Number of Group (1 key) address registration : Max.
500 items
Program 8 items
Direct address
input
Input from the soft keyboard Entry by 10-
key, # key, *
key
Chain dial —Yes (pause
key)
Resend Call up nearest address which are specified as a single
destination
Shortcut for
address
selection (quick
key)
Use the 10-key to call up registered numbers of
addresses.
CC/BCC
sending Yes —
Item name Selective/direct entry from the list —
File name Selective/direct entry from the list —
Return mail
address —
(1 default
address fixed as
sender name)
(1 default
address fixed
as sender
name)
Sender name Yes (Selective
from the list/direct
entry from the list/
selection from
LDAP server)
No
Transmission
message
(message body)
—
Mail footer
preset —
Item Scanner Internet Fax Fax
Address
specification
Specification by one-touch/group/direct address input.
*
No. of
registration
items of direct
address input *
Group, interface broadcasting total max: 5,000 items
Broadcast send Yes
(Broadcast
send is disabled
for FTP/
Desktop/SMB)
Yes
Sequential send
request —Yes
Item Scanner Internet Fax Fax
Memory transmission —
When the upper
limit value is set,
memory send is
performed.
Yes
Onhook — Yes
Quick online send — Yes
Direct transmission — Only in
Onhook
Automatic reduction
send —
Yes
(A3oB4,
A3oA4,
B4oA4
Rotation send Yes (Manual) Yes (Auto)
Zoom send Yes (Zooming of standard size to standard size
only. (There are combinations that cannot be
rotated.))
Recall
mode
Error — Yes
Busy — — Yes
The conditions of recall number and time can be
set with the system setting.
Book document send Yes
Long document send Yes (Max.800mm)
File division send Yes —
Send size limit Yes —
Stamp function Yes
No. of registration
items of senders Max. 999 items
Address Confirmation
Function (Prevention
of mis-send)
—
Yes
(Soft
switch)
Item Internet Fax Fax
Automatic reception Yes
Manual reception Yes
Memory reception Yes
Fixed size reduction
reception Yes
Specified size zoom
reception —
Rotation reception Yes
Division reception Yes (Conditions are set by the system.)
Duplex reception Yes (Conditions are set by the system.)
2 in 1 reception —
Domain/Address
specification receive
enable
Yes (50 items) —
Domain/Address
specification receive
disable
Yes (50 items) —
Certain rejection
number setting
—Yes
(50 items)
External telephone
connection remote
—Yes
Answering telephone
connection —No
(PAT countermeasure)
Transfer function when
output is disable Yes
Automatic boot mode Yes

MX-M700N SPECIFICATIONS 2 – 7
h. Report/list function
i. Other functions
j. Record size
k. F code communication
C. Printer function
(1) Platform
(2) Support OS
(3) Command system
(4) Built-in fonts
• The printing system is provided with one bitmap font compatible
with HP and 80 European outline fonts for PCL.
• In addition to this, when the PS expansion kit is installed, it is pro-
vided with 136 European outline fonts for PS and 5 Japanese
outline fonts.
(5) Support print channel
Item Scanner Internet Fax Fax
Communication
record table Yes
Communication
result table NO Yes
Address/
Telephone
number table
Yes
Group table Yes
Sender table Yes (Sender
registration table)
Yes (Described on the system
setting list.)
Program table Yes
Memory box
table —Yes (FAX mode only)
Memory
contents clear
notification
table
—
(May be outputted in case of an error.)
Receivable/
rejection
number list
—Yes
Receivable/
Rejection
address list
Yes —
Transfer-to-
email table list Yes
Transfer-to-
administrator
list
Yes
Web setting list Yes
Item Scanner Internet Fax Fax
Time
specification Yes
Poling receive — Yes
Bulletin board
send —Yes
Cover function — NO
Sender print — Yes
Page division Yes
Page
connection
NO
Confidential
data (Remote
machine)
—
Yes
(F code
system)
Relay
broadcast
indication
—
Yes
(F code
system)
Send message NO
Edge erase Yes
Center erase Yes
2 in 1 Yes
Card shot Yes
Send to PC — PC-iFAX PC-FAX
Linearrized
PDF
Corresponds by
Net Scan Tool ——
Item Internet Fax Fax
Max. record
width
293mm
Record size A3 to A5/11 x 17 to 5.5 x 8.5
Item Fax
Sub address Yes (Max. 20 digits)
Pass code Yes (Max. 20 digits)
• IBM PC/AT compatible machine
•Macintosh
OS
Custom
PCL5e/6
SPDL2
Custom
PS PPD GPD
Windows 98 Yes Yes Yes No
Me Yes Yes Yes N o
NT 4.0 SP5 or later Yes Yes Yes No
2000 Yes Yes Yes No
XP Yes Yes Yes N o
Server2003 Yes Yes Yes No
Server2003 x64 No No No Yes
XP x64 No No No Yes
Mac 9.0 to 9.2.2 No No Yes No
X 10.1.5 No No Yes No
X 10.2.8 No No Yes No
X 10.3.9 No No Yes No
X 10.4 - X 10.4.7 No No Yes No
Command system
PCL5e, PCL6 compatible Standard
PS3 compatible Option (PS expansion kit)
Bitmap fonts 1 kind of font
PCL5 Latin font 80 PCL Latin fonts (SPDL)
Standard built-in fonts
PCL Kanji font Option (2 ACT Fonts)
PS Latin font 136 Type 1 Latin fonts
Auxiliary to the PS expansion kit
Bar code font Option
Support print channel NetWare environment PSERVER/RPRINT
LPR
IPP
PAP : EtherTalk (AppleTalk)
FTP
FTP Pull Print
NetBEUI
Raw Port (Port 9100)
USB 2.0
HTTP (WEB Submit Print)
POP3 (E-mail To Print)
USB USB 1.1:
Windows98/98SE/Me/2000/XP only
USB 2.0:
Windows 2000/XP only
For NetWare environment
PSERVER/RPRINT
Print channel in PSERVER/PRINT mode to
be used in netware environment
LPR UNIX LPR/LPD command-compatible print
channel
IPP Print channel in compliance with IPP1.0
PAP: EtherTalk
(AppleTalk)
Print channel used in the Macintosh
environment
FTP Function to print receive data by use of the
builtin FTP server.
NetBEUI Microsoft NetBEUI compatible print channel
Port9100 Supports 9100 TCP port (Raw Port).
WEB Submit Print This channel is used to set and print directly
the files on the network by Web Page.

MX-M700N SPECIFICATIONS 2 – 8
• IPP, and HTTP supports SSL.
(6) Command compatibility
(7) Environment setting
(8) Print function
E-mail To Print This channel is used to print only an
attached file directly when an E-mail with an
attached file is received. PCL5e compatible PCL5e is aimed to provide compatibility with HP
LaserJet 4050.
PCL6 compatible PCL6 is aimed to provide compatibility with HP
LaserJet 4050.
PostScript
compatible
PostScript is aimed to provide compatibility with
Adobe PostScript.
Setting item Outline
Default setting Basic setting of printing such as the number of
copies and printing direction.
PCL setting PCL symbol setting and font setting
PS setting Setting of print enable/disable in a PS error
Functions Content PCL6/5e PS (OPTION)
Multiple Pamphlet Two or more center bindings are collected into one. Yes Yes
Barcode font Compatible with JetCAPS BarDIMM emulation.
True type font for barcode usable in PCL5e.
Yes
(5e only) No
Network tandem print Two main units are connected in network and printing can be made by the linkage of the two main
unit. Yes Yes
Windows Cluster Print Even if one Windows server is down, the mirror server will execute the interrupted print job
instead of the down server. Yes Ye s (Windows only)
PDF/TIFF direct print PDF/TIFF files can be printed without the printer drivers.
(1) Print of an attached file of an e-mail
(2) Print from the FTP server
(3) Print from the setting file on the Web page
Yes
(PDF is No) Yes
E-Mail To Print When an e-mail with an attached file is received, only the attached file is printed directly. Yes Yes
PULL print from front panel The FTP server is checked from the front panel and only the specified file is pull-printed (direct
print). Yes Yes
USB PULL print The FTP server is checked from the front panel and only the specified file is pull-printed (direct
print). No No
SMB PULL print The file folder on the network is checked from the front panel, and the specified file is pull-printed. No No
FTP PUSH print Data are transferred from the client PC to the MFP server, and direct print is executed. Yes Yes
Print by setting the file on
the Web Page.
[Web Submit Print]
A file on the network is set on the Web page, and direct print is executed.
Yes Yes
ROPM One RIP process allows to print two or more copies. Yes Yes
Conforming to multi access RIP process can be executed during printing. Printing can be executed during scanning. Yes Yes
Setting of the paper
direction for duplex print of
letterhead paper and
punched paper
For letterhead and punching sheet which has attribute of front and back, duplex print can be made
in the proper front and back and proper page sequence. Yes Yes
Manual specification type/
Size detection enable
setting
When the set value of the manual tray type on the main unit differs from that on the driver side, the
set value of the printer driver has priority over the set value on the main unit and printing is made. Yes Yes
Management of setting
environment under the
terminal server control
Under the meta-frame environment (under the auto print create environment), the print setting of
each client is saved. (In order to avoid the trouble of having to set at every login.) Yes Yes
(Windows only)
Driver delivery function The administrator can distribute the driver to each client by PAU4. Yes Yes
(Windows only)
Form overlay The form is downloaded to the main unit in advance, and only the data are sent to the main unit,
where data are loaded into the form to be printed.
Yes
(5e only) Yes
Conforming to Planet Press Supports the Objectif Lune PlanetPress (which performs mapping between the downloaded form
and the variable data in the printer). No Yes
(Windows only)
Management of blind Web
Page by the password
In order to block access to the address of a blind Web Page. Yes Yes
Bonjour for
Macintosh environment
The technology developed by Apple for detecting and connecting peripheral devices on the
network automatically
Without setting by the user, the computer, the peripheral devices, and the software can be
dynamically connected in network.
(OS X 10.3 and later)
No Yes
Document control print The pattern is printed on paper.
(When the data security kit is installed) No No
Missing-prevention
marking
The paper edge is marked in order to judge paper missing. No No
Layout print The layout supported for various print purposes can be made. No No
No-line binding To prevent against bulge at the end when binding pages, center binding is executed for small lot of
pages. No No
Chapter division A white sheet is automatically inserted so that the head page of each chapter comes on the odd
(or even) page. No No

MX-M700N SPECIFICATIONS 2 – 9
(9) Windows driver function
a. Frequently used functions
* For printing, the PS driver bundled in Windows is required.
b. Paper feed system
* For printing, the PS driver bundled in Windows is required.
c. Paper exit method
* For printing, the PS driver bundled in Windows is required.
d. Image quality
* For printing, the PS driver bundled in Windows is required.
e. Font
f. Other functions
* For printing, the PS driver bundled in Windows is required.
Functions PCL5e PCL6 PS PPD (*)
Number of
copies
1 to 999
Print
direction
Vertical/Horizontal
Duplex print Simplex print, duplex print
(Left/Upper/Right binding)
Simplex print,
duplex print (Long
side/Short side
binding)
Center
binding
Invoice on Letter, Letter on Ledger,
A5 on A4, A4 on A3, B5 on B4,
Letter on Letter, Ledger on Ledger,
A4 on A4, A3 on A3, B4 on B4
Windows2000, XP:
Yes
Other OS: No
Binding
direction
Left/Upper/Right Long side/Short
side
N-up 2/4/6/8/9/16 WindowsNT 4.0: —
Windows2000, XP:
2/4/6/9/16 Other
OS: 2/4
N-up
direction
[2-Up]:
Left to Right / Right to Left
[4, 6, 8, 9, 16-Up]:
Right, and Down /
Down, and Right
Left, and Down /
Down, and Left
N-up frame
line Yes/No
Yes
(Always prints
border line)
Functions PCL5e PCL6 PS PPD (*)
Paper size A3/B4/A4/B5/A5/Postcard/Ledger/Legal/Foolscap/Letter/
Executive/Invoice/8K/16K
Paper type Normal paper, letterhead, printed paper, punched paper,
recycled paper, color paper, label sheet, thick paper, OHP,
tab paper
User
definition
type
7 types
Paper feed
system
Auto paper feed, Tray 1/2/3/4/5, manual feed
Cover paper/
Back cover
page
Yes/No Setting of Duplex/Simplex/
No print —
Cover paper Yes
Insert paper Yes —
OHP insert
paper
No/Yes (White paper)
Yes (Printed paper) —
Functions PCL5e PCL6 PS PPD (*)
Paper exit
destination
setting
• Center tray
• Finisher oTray 1
• Finisher oTray 2
• Saddle stitch finisher oTray 1
• Saddle stitch finisher oTray 2
• Saddle stitch finisher oSaddle stitch tray
Staple Finisher
• No staple
• 1 position
• 2 positions
Saddle stitch finisher
• No staple
• 1 position
• 2 positions
Offset Yes (every time)
Function PCL5e PCL6 PS PPD (*)
Resolution 600/300dpi 600dpi
Halftone
—
(55ppm/
62ppm)
Yes/No
(70ppm)
—
Screen Frequency 8.0 to
360.0 in 0.1 steps
Screen angle 0.0 to 360.0 in
0.1 steps
Graphic mode
selection
Raster
HP-GL2
Raster
vector —
Smoothing 55/62ppm: Yes
70ppm : No
Toner save Yes/No
Ultra fine photo 55/62ppm: Yes
70ppm : No
Black-white
reversion —Yes/No
Mirror image —Horizontal
/Vertical Horizontal
Zoom — 25 to 400%
Fit page Yes/No —
Function PCL5e PCL6 PS PPD (*)
Usable built-in
fonts
80 fonts
Category 3 and 4
In font chapter
136 fonts
Category
1In font
chapter
5 Japan-
ese fonts
Category
2 In font
chapter
(For Windows
NT4.0)
Traditional 35
Latin fonts
Category 1 In
font chapter
(For Other OS)
136 Latin fonts
Category 1 In
font chapter 5
Japanese fonts
Category 2 In
font chapter
Download system
which can be
selected
Bitmap, TrueType,
Graphics
Bitmap, Type 1, TrueType
Function PCL5e PCL6 PS PPD (*)
Units composition
setting Yes
Watermark
Yes
Yes
(Limitations on
functions)
Overlay Yes —
Print hold Yes —
Job retention Yes —
Sample print Yes —
Print department
management Yes —
User setting Yes —
Option auto setting Yes —
Job complete
notification Yes —
Tandem print Yes
Carbon print Yes —
Enlargement
continuous copy —
Vertical/horizontal
independent
magnification ratio
—Yes—
Cover insertion
+center binding Yes —
Document filing Yes —

MX-M700N SPECIFICATIONS 2 – 10
(10) Windows PPD, Macintosh PPD driver funciton
a. Frequently used functions
b. Paper feed system
c. Paper exit method
d. Image quality
e. Font
f. Other functions
(11) Print performance
D. Document filing function
(1) Basic function
Functions Macintosh PPD
Number of copies 1 to 999
Print direction Vertical/Horizontal
Duplex print Simplex print, duplex print (Left/Upper binding)
Center binding Yes
Binding direction Long side/Short side
N-up 2/4/6/8/16
N-up direction Z / Reverse Z/N / Reverse N
N-up frame line None / Single Hairline / Single Thinline / Double
Hairline / Double Thinline
Functions Macintosh PPD
Paper size A3, B4, A4, B5, A5, Postcard, Ledger, Legal,
Foolscap, Letter, Executive, Invoice, 8K, 16K
Paper type Normal paper, letterhead, printed paper, punched
paper, recycled paper, color paper, label sheet, thick
paper, OHP, tab paper
User definition type 7 types
Paper feed system Auto paper feed, Tray 1/2/3/4/5, manual feed
Cover paper/Back
cover page Yes/No
Cover paper Yes
Insert paper NO
OHP insert paper No/Yes (White paper), Yes (Printed paper)
Function Macintosh
Paper exit
destination setting
Top tray
Finisher
Tray1
Tray2
Saddle stitch finisher
Tray1
Tray2
Saddle stitch tray
Staple Finisher
• No staple
• 1 position
• 2 positions
Saddle stitch finisher
• No staple
• 1 position
• 2 positions
• Saddle stitch
Offset Yes (every time)
Function Macintosh
Resolution 600dpi
Halftone (55ppm/62ppm) Yes/No
(70ppm) —
Graphic mode
selection —
Smoothing (55ppm/62ppm) : Yes/No
(70ppm) : —
Toner save Yes/No
Ultra fine photo —
Black-white
reversion Ye s /N o
Mirror image Horizontal/Vertical
Zoom 25 to 400%
Fit page No
Function Macintosh
Usable built-in
fonts
Traditional 35 PS Latin fonts
Category 1 In font chapter
5 fonts Category 2 In font chapter
Download system
which can be
selected
Yes (Mac OS9.x.x - LaserWriter)
Function Macintosh
Units composition
setting
Yes
Watermark Yes
Overlay No
Print hold Yes
Job retention Yes (PIN code input enable)
Sample print Yes
Print department
management Yes
User setting —
Option auto setting Yes
Job complete
notification
—
Tandem print Yes
Carbon print Yes
Enlargement
continuous copy —
Vertical/horizontal
independent
magnification ratio
—
Cover insertion
+center binding —
Document filing —
Model PDL
type
Word:
script.doc (eng.)
A total of
9 pages
Excel:
xl8garly.xls
A total of
20 pages
PowerPoint:
Pw4051.ppt
A total of
6 pages
55ppm PCL6 16.2 sec 33.7 sec 10.5 sec
PCL5e 15.4 sec 32.4 sec 13.0 sec
PS 15.8 sec 50.0 sec 13.9 sec
ppd 14.1 sec 37.1 sec 11.6 sec
62ppm PCL6 13.8 sec 31.4 sec 12.8 sec
PCL5e 15.4 sec 31.5 sec 12.7 sec
PS 15.6 sec 49.9 sec 13.9 sec
ppd 13.4 sec 41.3 sec 12.2 sec
70ppm PCL6 14.6 sec 31.1 sec 11.9 sec
PCL5e 15.4 sec 30.5 sec 13.3 sec
PS 14.6 sec 49.2 sec 13.4 sec
ppd 14.3 sec 37.0 sec 11.0 sec
* Measurement conditions
(Windows) (Macintosh)
PC: Pentium III 1GHz 128MB PC: PowerPC G3 700MHz 256MB
OS: Windows XP Professional
Driver setting: Default
Software: Microsoft Office XP
Document filing capacity 16GB
Fixed folder Standard folder/
User folder
Max. 20000 pages
or 3000 files
Temporary folder Max. 10000 pages
or 1000 files
Number of pages for one file Conforms to the large volume document
mode. (Within the HD capacity)
Number of folders which can
be formed in the user folder
Max. 500 folders
Number of users which can be
registered
Max. 500 users
Function Macintosh