Sharp CD-DP2400H User manual

– 1 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
This Quick Guide will help you to correctly
install and operate your system.
CD-DP2400H
MINI COMPONENT SYSTEM
Accessories
123
Battery installation of remote control
Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar). Batteries are not included.
Remove the Insert the batteries Replace the cover.
battery cover. as shown.
1
1
2
2
TINSE0424AWZZ A0107.HK
FM aerial × 1
Remote control × 1 AM loop aerial × 1
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/support.
CustomerswithoutInternet access maytelephone
08705274277during officehours(or(01)676 0648
if telephoning from Ireland).
0101
*CDDP2400E_QG 01.7.18, 14:101

–2 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
System connections
3
3
AM loop aerial
FM aerial
Red
Black
Front speaker (Right) Front speaker (Left)
Wall socket
(AC 230 V, 50 Hz) RCA lead
(not supplied)
To the line
output sockets
VCR, DVD, etc.
TV
Centre speaker
Surround speaker
(Right) Surround speaker (Left)
Grey
Orange
Centre speaker
Surround speaker
(Right) Surround speaker
(Left)
Front speaker
(Right)
Front speaker
(Left)
*CDDP2400E_QG 01.7.18, 14:102

–3 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Turn on your system
4
4
12
The first time the unit is plugged
in, the unit will enter the demon-
strationmode.Youwillseewords
scroll.
Press the
X-BASS/DEMO button
to cancel the demon-
stration mode.
Press the ON/
STAND-BY button to
turn the power on.
12 cm (5”)
8 cm (3”)
Listening to a CD (CDs)
FM stereo mode indicator
FM stereo receiving indicator
Listening to the radio
1Press the CD button.
2Press the 7 7
7 7
7 OPEN/CLOSE button to
open the disc tray.
3Place the CD(s) on the disc tray, la-
bel side up.
When loading a third disc, press the
DISC SKIP button to turn the disc
tray, then place the CD in the open
position.
4Press the 7 7
7 7
7 OPEN/CLOSE button to
close the disc tray.
5To select the CD you want to listen
to first, press one of the DISC-1 -
DISC-3 buttons.
6Press the 0 / R 0 / R
0 / R 0 / R
0 / R button to start play-
back.
1Press the TUNER (BAND) button re-
peatedly to select the desired fre-
quency band (FM or AM).
2Press the TUNING/TIME (XX
XX
Xor WW
WW
W)
button to tune in to the desired sta-
tion.
When the TUNING/TIME button is
pressed for more than 0.5 seconds,
scanning will start automatically and
the tuner will stop at the first receiv-
able broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the
“ST”indicator.
●“jj
jj
j”will appear when an FM broadcast is in
stereo.
*CDDP2400E_QG 01.7.18, 14:103

–4 –
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
■If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal sup-
ply voltage due to lightning, etc.) or if it is operated incorrectly, it
may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
2.
If the unit is not restored in the previous operation, un-
plug and plug in the unit, and then turn the power on.
Note:
Ifneitheroperationabove restores the unit, clear all thememory
by resetting it.
■Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power
stand-by mode.
2.
Whilst pressing down the
0 / R0 / R
0 / R0 / R
0 / R button and the X-BASS/
DEMO button, press the ON/STAND-BY button until
“CLEAR AL”appears.
Caution:
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD programme.
■Maintenance
●Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
●When cleaning the heads, pinch rollers, etc., unplug the
unit which contains high voltages.
●After long use, the deck’s heads and capstans may be-
come magnetised, causing poor sound. Demagenetise
these parts once every 30 hours of playing/recording time
by using a commercial tape head demagnetiser. Read the
demagnetiser’s instructions carefully before use.
●Clean the dust or stain on the CD pickup lens using a com-
mercial cleaning disc (brush type).
TAPE 1 TAPE 2
Listening to a cassette tape (TAPE 1 or TAPE 2)
A Playback head
B Capstan
D Erase head
E Recording/Playback head
C Pinch roller
TAPE 1
TAPE 2
AC
C
DE
B
B
1Open the cassette door by pushing
the area marked “7 7
7 7
7 PUSH EJECT”.
2Load a cassette into the TAPE 1 or
TAPE 2 cassette compartment with
the side to be played facing toward
you.
3Press the TAPE (1 VV
VV
V2) button to se-
lect the cassette you want to listen
to.
4Press the 0 / R0 / R
0 / R0 / R
0 / R button to start play-
back.
*CDDP2400E_QG 01.7.18, 14:104