Sharp CD-XP700H User manual

– 1 –
This Quick Guide will help you to correctly
install and operate your system.
CD-XP700H
MINI COMPONENT SYSTEM
Accessories
123
Remote control battery installation
Remove the Insert the batteries Replace the cover.
battery cover. as shown.
1
1
2
2
TINSZ0805AWZZ 02B R HK
FM aerial × 1
Remote control × 1
AM loop aerial × 1
If you require any advice or assistance regarding
your Sharp product, please visit our web-site
www.sharp.co.uk/support.
CustomerswithoutInternetaccessmaytelephone
08705274277duringofficehours(or(01)6760648
if telephoning from Ireland).
0101
“AA” size battery (UM/SUM-3, R6, HP-7
or similar) × 2
CDXP700HE_QG 02.2.7, 0:06 AM1

–2 –
System connections
3
3
AM loop aerial
FM aerial
Red Black
Right speaker Left speaker
Wall socket
(AC 230 V, 50 Hz)
RCA lead
(not supplied)
To the line
output sockets
VCR, DVD, etc.
TV
Right speaker Left speaker
Beforeturningthepoweron,besuretoremovethistransportscrew
on the back of the unit using a flat head screwdriver or a coin.
CDXP700HE_QG 02.2.7, 0:06 AM2

–3 –
Turn on your system
4
4
12
The first time the unit is plugged
in, the unit will enter the demon-
strationmode.You will see words
scroll.
Press the
EQUALIZER/X-BASS/
DEMO button to cancel
the demonstration mode.
63
2, 4
1
5
12 cm (5”)
8 cm (3”)
Listening to a CD (CDs)
FM stereo mode indicator
FM stereo receiving indicator
1
2
Listening to the radio
1Press the CD button.
2Press the 77
77
7 OPEN/CLOSE button to
open the disc tray.
3Place the CD(s) on the disc tray, la-
bel side up.
When loading a third disc, press the
DISC SKIP button to turn the disc
tray, then place the CD in the open
position.
4Press the 77
77
7 OPEN/CLOSE button to
close the disc tray.
5To select the CD you want to listen
to first, press one of ss
ss
s1 - ss
ss
s3 but-
tons on the remote control.
6Press the 0 / R0 / R
0 / R0 / R
0 / R button to start play-
back.
1Press the TUNER (BAND) button re-
peatedly to select the desired fre-
quency band (FM or AM).
2Press the TUNING/TIME (XX
XX
Xor WW
WW
W)
button to tune in to the desired sta-
tion.
When the TUNING/TIME button is
pressed for more than 0.5 seconds,
scanning will start automatically and
the tuner will stop at the first receiv-
able broadcast station.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the
“ST”indicator.
●“jj
jj
j”will appear when an FM broadcast is in
stereo.
Press the
ON/STAND-BY button
to turn the power on.
CDXP700HE_QG 02.2.7, 0:06 AM3

–4 –
■If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal sup-
ply voltage due to lightning, etc.) or if it is operated incorrectly, it
may malfunction.
If such a problem occurs, do the following:
1. Set the unit to the stand-by mode and turn the power
on again.
2.
If the unit is not restored in the previous operation, un-
plug and plug in the unit, and then turn the power on.
Note:
Ifneitheroperation above restores the unit,clearall the memory
by resetting it.
■Clearing all the memory (reset)
1. Press the ON/STAND-BY button to enter the power
stand-by mode.
2.
Whilst pressing down the CLOCK button and the
EQUALIZER/X-BASS/DEMO button, press the ON/
STAND-BY button until “CLEAR AL”appears.
Caution:
This operation will erase all data stored in memory including
clock, timer settings, tuner preset, and CD programme.
■Maintenance
●Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton swab
moistened with commercial head/pinch roller cleaner or
isopropyl alcohol.
●When cleaning the heads, pinch rollers, etc., unplug the
unit which contains high voltages.
●After long use, the deck’s heads and capstans may be-
come magnetised, causing poor sound. Demagenetise
these parts once every 30 hours of playing/recording time
by using a commercial tape head demagnetiser. Read the
demagnetiser’s instructions carefully before use.
●Clean the dust or stain on the CD pickup lens using a com-
mercial cleaning disc (brush type).
TAPE 1 TAPE 2
1, 2
3
4
Listening to a cassette tape (TAPE 1 or TAPE 2)
A Playback head
B Capstan
D Erase head
E Recording/Playback head
C Pinch roller
TAPE 1
TAPE 2
AC
C
DE
B
B
1Open the cassette door by pushing
the area marked “77
77
7 PUSH EJECT”.
2Load a cassette into the TAPE 1 or
TAPE 2 cassette compartment with
the side to be played facing toward
you.
3Press the TAPE (1 VV
VV
V2) button to se-
lect the cassette you want to listen
to.
4Press the 0 / R0 / R
0 / R0 / R
0 / R button to start play-
back.
CDXP700HE_QG 02.2.7, 0:06 AM4