Sharp EC-SC95H-H User manual

Operation
Manual
Read this operation manual carefully before first use.
Keep this manual for further guidance in case.

household electricalcleaning
appliances
Please carefully safely
solely responsible explanation
continuously
wholeheartedly
manual

household
including
appliancesReplacing
In shall original
lithiumPlease
Please
please
replaced oneself
household
will
personal

latch
align
hold
latch
Battery release
button
Power rolling nozzle
Carpet
rolling brush
Water
tank
.
.

Cleaning indicator
light
Low
rolling
rolling
rolling
rolling
Clean clean
particulate
small
blade
Medium
..
.

2 in 1
brush
bedding nozzle
bedding nozzle
bedding nozzle
rolling
rolling
roller
Clean
particulate
small
blade
.
.
.
.
.
.

only
Pull Insert
low
cell left
Note: Hanger installation method：
.
.
.
.
.

EN-13
Troubleshooting/Specifications/Precautions
1）When using the vacuum cleaner
Please keep away from heaters, such as radiators and cigarette butts, etc.
2）Before using the vacuum cleaner
Please remove large and sharp objects to prevent the machine from being damaged
after collision. Do not suck up flammable materials or liquids, such as gasoline
or cigarettes, alcohol, etc.
3）Do not turn the machine upside down when replacing the filter to prevent liquid or
dust from falling into the motor, causing faults and dangers.
※
※Precautions
※roubleshooting
Specifications:
Power supply Input 100-240V~50-60Hz (Charger)
Power supply method Rechargeable type ( lithium ion battery,25.9V )
Electric power consumption
While charging : Approx. 24W; After charging : Approx. 0W
Continuous operation time Low: Approx. 48 mins
Medium: Approx. 22 mins
High: Approx. 10 mins
Dust collecting capacity 0.7L
Charging time 3-4 hrs
Weight(Charger) 111g
Base unit dimensions 250mm W ×1070mm H × 200mm D
Charger dimensions 51mm W ×36mm H × 77mm D
Cord length（Charger） 180cm
3kg
Weight(Suction head,pipe,
base unit and battery included)
1. Empty the dust cup
3. Check if the filter case and the filter are installed
2. Check if the dust cup is installed correctly
correctly
4. Clean the filter
1. Charge the vacuum
2. Clean the rolling brush and the bearing thoroughly
1. Check if the plug has been inserted already
2. Check if the socket is useful
Suction gets weak
Stop working
Battery doesn’t hold
a charger

SHARP CORPORATION