Sharper Image URG-13178 User manual

Item No. 205388
3-IN-1 NECK THERAPY WITH REMOTE
Owner’s Guide
Thank you for purchasing the Sharper Image 3-in-1 Neck Therapy with Remote.
Please take a moment to read this Owner’s Guide and store it for future reference.
- 1 -
• Soothes and relaxes the neck
• Combines low-frequency electrical impulses, Far Infrared Ray (FIR) heat, vibration massage
and embedded magnet therapy
• Far Infrared Ray (FIR) heat penetrates muscle and bone tissue without getting hot to the touch
• Manual and automatic massage modes (6 preset modes)
• 16 electrical intensity levels
• 3 vibration intensity levels
• 3 heat intensity levels (High/Low/Off)
• 6 electrical impulse modes
• 6 vibration modes
• Automatic shutoff timer (5-30 minutes)
• Comfortable, ergonomic design
• Cordless design for portability
• Wireless remote control with backlit LCD screen
IMPORTANT: Please charge this device before using it for the first time.
• Plug the adapter into the DC power supply jack on the device.
• Plug the other end of the adapter into an AC outlet.
• The LED light will flash quickly while it is charging.
• The LED light will flash slowly once it is fully charged.
NOTE: A full charge takes approximately 2 hours.
FEATURES
CHARGING THE 3-IN-1 NECK THERAPY WITH REMOTE

- 2 -
• Wipe away any perspiration from your neck.
• Moisten the neck ring with a slightly damp towel.
• Place the device around your neck (with the opening in front).
• Set the function switch to the ON position.
• Press the Power button to begin operation. NOTE: The LCD screen on the remote displays the status as it
enters the default mode (automatic mode). See description of modes below.
• Press the Power button once more to cease operation.
The wireless remote control uses infrared light
emitted from the bottom of the controller. The
infrared light must make contact with the infrared
receiving window on the front of the device. See
illustration below.
• Press the or buttons to enter the mode menu . Then, press or to select one of
6 massage modes:
MODE 1 (Automatic mode): Vibration + Heat / Heat + Electrical Impulse / Heat only / Vibration only /
Electric Impulse only
MODE 2: Vibration + Heat
MODE 3: Heat + Electrical Impulse
MODE 4: Heat only
MODE 5: Vibration only
MODE 6: Electrical Impulse only
NOTE: Do not change modes while this device is in use. Turn it off first and then restart it.
• Press the or buttons to enter the timer settings . Then, press or to set the automatic
shutoff timer, from 5 to 30 minutes.
• Press the or buttons to enter the electrical impulse settings . Then, press or to select
one of 6 different impulse modes.
• Press the and buttons to scroll up and down.
• Press the and buttons to decrease or
increase values.
NOTE: If the wireless remote stops working, replace
the battery. Use a fresh CR2032 button cell battery.
USING THE 3-IN-1 NECK THERAPY WITH REMOTE
USING THE WIRELESS REMOTE
MASSAGE MODES
TIMER SETTINGS
ELECTRICAL IMPULSE SETTINGS

- 3 -
• Press the or buttons to enter the intensity settings . Then, press or to select the intensity
of the electrical impulses (16 levels) or vibrations (3 levels).
• Press the or buttons to enter the vibration mode settings . Then, press or to select one of
6 different vibration modes: Auto / Vibration / Kneading / Beating / Press / Rolling.
• Press the or buttons to the heat settings . Then, press or adjust the heat to High (H),
Low (L) or Off (O).
SELECTING INTENSITY LEVEL
VIBRATION MODES
SELECTING HEAT LEVEL
DESCRIPTION OF PARTS
POWER LED
Always bright = Working condition
Fast ash = Charging
Slow ash = Fully charged
FUNCTION SWITCH
ON = Normal operation
Charge = Charging mode
DC POWER
SUPPLY JACK
Infrared Receiving Window
Conductor Plates/Heating Plates

DESCRIPTION OF REMOTE
CLEANING AND MAINTENANCE
WARNINGS
TECHNICAL SPECIFICATIONS
A. LCD Screen
B. Mode
C. Timer
D. Electrical Impulse
E. Intensity
F. Vibration
G. Heat
H. Scroll Up
I. Scroll Down
J. Decrease Value
K. Increase Value
L. Power Button
M. Infrared Signal Emitter
N. Battery Compartment
O. AC Adapter
• Wipe the device with a soft, barely damp cloth if
necessary.
• Store in a dry, well ventilated place.
• Do not store in direct sunlight or in any hot,
humid place.
• Do not use this device if you have a pacemaker.
• Do not use this device if you have sensitive skin
or a heat sensitive condition.
• Do not change modes while this device is in use.
Turn it off first and then restart it.
• Pregnant women and cardiovascular patients
should consult their doctor before using this
device or any at-home massage device.
• Do not use this device while sleeping.
• Do not use this device in the bath or shower.
• This device is not a toy. Keep out of reach of
children at all times.
• An increased intensity of pressure or power does
not result in a more beneficial therapeutic effect.
• Do not open or dismantle this device. There are
no user-serviceable parts.
• Do not immerse this device in water or any other
liquid.
A
B
C
D
E
F
G
H
I
M
J K
L
N
O
- 4 -
Model: URG-13178
Weight: 630 g
Power (device): 6V DC ≤ 6W
Power (remote control): CR2032 button
battery 3V DC
Electric impulse frequency: 1-1000Hz
Width of electric impulse: 20-400us
Wave of electric impulse: square wave
The SHARPER IMAGE® name and logo are registered trademarks.
©Sharper Image. All Rights Reserved.
Sharper Image branded items purchased from SharperImage.com include a 1-year limited
replacement warranty. For Customer Service, please call 1 [phone].
WARRANTY / CUSTOMER SERVICE