Shop fox SHOP FOX D4033 User manual

COPYRIGHT © JUNE, 2010 BY WOODSTOCK INTERNATIONAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. Printed in China#12963JB
Figure 1. Drill press fitted with Model
D4033 drill press table.
Figure 2. Installed table.
Model D4033
Shop Fox Drill Press Table
Instruction Sheet
Phone #: [phone] • Online Tech Support: [e-mail] • Web: www.shopfox.biz
Damage to your eyes, lungs, and ears could result
from using a drill press without protective gear,
such as safety glasses, a respirator, and hearing
protection.
Specifications
Size ................................. 23
3⁄4" W x 11 7⁄8" D x 3" T
Aluminum Insert T-Slots........................................2
Wooden T-Slots ..................................................1
Weight ..................................................10
1⁄2lbs.
Construction ...........................Melamine-Coated MDF
Color ........................................................White
Inventory (Refer to Figures 1 & 2) Qty
Table ..............................................................1
Fence .............................................................1
Fence Stop .......................................................1
Knobs .............................................................5
Clamp Assemblies ...............................................2
Installation
1. File down any nicks or burrs in the drill press table,
clean the surface, then wipe a very light coat of
machine oil on the table to prevent rust should any
condensation occur.
2. Place the Model D4033 table onto the drill press
table, align the clamps as shown in Figure 2, then
snug them in place.
Table
Fence
Fence
Stop
Knob
Clamp Assembly

-2-
D4033 Drill Press Table Instructions
1
2
3
4
5
6
7
8
8
10
11
12
13
14
15
16
17
REF PART # DESCRIPTION
1 XD4033001 CLAMP BAR
2 XD4033002 TAPE SCALE
3 XD4033003 KNOB
4 XD4033004 TABLE INSERT
5 XPW01M FLAT WASHER 8MM
6 XD4033006 HOLDDOWN
7 XD4033007 STUD
8 XPFH39 FLAT HEAD SCR 6-32 X 7/16
10 XD4033010 THREADED FLANGE
11 XD4033011 T-SLOT BOLT M8-1.25 X 75
12 XD4033012 T-SLOT BOLT M8-1.25 X 35
13 XD4033013 KNOB M8-1.25
14 XD4033014 TABLE
15 XD4033015 STOP BLOCK
16 XD4033016 FENCE
17 XD4033017 T-TRACK
Parts
Maintenance and Care
• Keep your cast iron drill table and column rust-
free with regular applications of a high-quality rust
preventive product.
• To avoid condensation and rust between the two
tables, do not leave the Model D4033 table mounted
on the drill press table for long periods of time.
• Clean the Model D4033 drill press table by
vacuuming out T-slots when finished and wiping
down the table and fence with any good household
glass cleaner. Periodically lightly oil the hand knob
threads and the studs.
Operation
• Periodically verify the mounting clamps are snug,
and never overtighten the hand knobs.
• To avoid drilling into the table, make sure that the
drill press depth stop and drill bit alignment are
correct.
• Use the table only in dry environments.
• Wipe down workpieces to ensure they are free of
debris that may scratch the table.
• Remove the center plate (#4 in Parts) from the table
if you need to perform a through-drilling operation.