Shuttle CA10 User manual

- 1 -
▓1: INTRODUCTION
CA10 is a SPDIF in, SPDIF out optional kit which supports shuttle product.
▓
2: SPECIFICATION
▓
Optical Digital Playback/Recording
▓
Supports Coaxial and Optical SPDIF In/Out
▓3: PACKAGE CHECKLIST
The CA10 complete package should include:
▓
CA10
▓
2*5 cable
▓
Thismanual
▓4: HARDWARE INSTALLATION
1. Switch off your system and turn off all other peripheral you may have attached to
your computer, then remove your computers case cover.
2. When you want to SPDIF in and SPDIF out function, you can use 2*5 cable connec-
tion CA10 2*5 pin and motherboard SPDIF 2*5 pin.
3. Find one empty slot on back panel of chassis, secure CA10 bracket with a screw.
4. Replace the computer cover.
1
2 10
CA10V1.
1
OP
T
1
OP
T
2
JP 2
C
E
2
+C
E
1
J1
Optical SPDIF IN
2*5 Header
Optical SPDIF OUT
Coaxial SPDIF OUT Coaxial SPDIF IN
1
SPDIF

CA10 Installation Guide
All brands and product names within this guide are the property of their
respective owners. Shuttle assumes no responsibility for any errors or
omissions. Nor does shuttle make any commitment to update information,
with or without prior notification.
Internet: http://www.shuttle.com
CA10 User Manual Ver 1.0 M591