Siemens TCM2 User manual

Siemens Energy & Automation, Inc.
Bellefontaine, Ohio 43311 U.S.A.
Installation Instructions
Item: Cat. No. TCM2, TCM3 Plug-InAdapters
For use with: SIEMENS®MD, MM & MF Frame Cir-
cuitBreakersTypes: MD6, MM6, MMK, MFC, MFF,
HMD6, CMD6, SMD6,SHMD6, SCMD6, MD6ETI,
CMD6ETI,andMolded Case SwitchType MXD6 in
conjunction with plug-in-mounting assemblies Cat.
No.’s PC5662, PC5663 andPM5663.
Page 1 of 2
Pc. No. 410904A01
Hazardous voltage.
Will cause death or
serious injury.
Turn OFF and lock out all
power supplying this
device before installing
or servicing accessory.
SAFETY INSTRUCTIONS
NOTE: This instruction outlines the recommended
installation procedure.
1. Circuit Breaker Preparation
The circuit breaker should be in the OFF/”O”
positionbeforeinstalling the plug-in-tulip adapter
kit. Turn off and lock out all power supplying this
device before installing. Verify that
NO voltage
is present before proceeding with task.
Fig. 4
Dimensions
Inches
[Millimeters]
Remove Pressure Wire Connectors From
Breaker If Present
2. Loosen four breaker terminal shields screws (6)
and remove both line and load side terminal
shields (7).
3. Place tulip clip assembly (8) on back of breaker
in recess provided in base molding. Secure in
placewith 5/16-18 hex headbolts(11)furnished.
Tighten these bolts to 72 In.-Lbs. (6 Ft.-Lbs.)
[8.13 N/m] to assure a good electrical connec-
tion. Repeat this procedure for the remaining
tulip clip assemblies.
4. INSERTEND SHIELDS (12) INTO SLOTS PRO-
VIDED AT LINE AND LOAD END OF
BREAKER.
5. Affixlabel(13) to frontof circuitbreakeras shown
in Fig. 4.
.25
[6.35]

Siemens Energy & Automation, Inc.
Bellefontaine, OH 43311 U.S.A.
Installation Instructions
Hazardous voltage.
Will cause death or
serious injury.
Turn OFF and lock out all
power supplying this
device before installing or
servicing accessory.
Page 2 of 2
Pc. No. 410904A01
© Siemens Energy & Automation, Inc.
TCM3
TCM2
4 x 12
4 x 8
8 x 9
2 x 6
4 x 7
4 x 7
2 x 6
6 x 8
8 x 10
8 x 11
1 x 13
6 x 12
12 x 9
12 x 10
12 x 11
1 x 13
5/16 - 18 [8.13 N/m]
72 In. Lbs.