Siemens AX75 User manual

Siemens Aktiengesellschaft,
issued by Communications,
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2005
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
www.siemens.com/ax75
black LIEBREICH, Medienproduktion
AX75
ss
Designed for life
Ba Cover AX75_105x140.qxd 18.04.2005 14:03 Uhr Seite 1

Table of Contents 1
See also Index at the end of this User Guide
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\output\FUG\AX75_V3_FUG_en_050811_vz_pk_druck\Pegasus-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
right page (1) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (11.08.2005, 15:36)
Safety precautions ............................. 2
Overview of the phone ...................... 4
Display symbols .................................. 5
Getting started ................................... 6
Switch on/off, PIN ............................... 7
Emergency number (SOS) ................ 7
Switching on your phone
for the first time ..............................7
General instructions ........................... 8
Standard functions ............................. 9
Security .............................................. 9
Codes .............................................. 9
Calling .............................................. 10
Dialling with number keys .............. 10
End call ......................................... 10
Set volume .................................... 10
Redial ............................................ 10
If the number is busy ..................... 10
Accept call ..................................... 10
Reject call ...................................... 11
Handsfree ...................................... 11
Swapping between 2 calls ..............11
Conference .................................... 11
Direct call ...................................... 11
Text entry ......................................... 11
Text entry without T9 ....................11
Special characters .......................... 12
Input menu ...................................12
Text entry with T9 ..........................12
Text modules ................................. 13
Default book ..................................... 14
Phonebook ....................................... 14
<New entry> .................................. 14
Call (search for an entry) ................14
Change entry .................................14
Addressbook ..................................... 15
<New entry> .................................. 15
Change entry .................................15
Call (search for an entry) ................15
Voice dialling ................................. 15
Groups .......................................... 15
Records ............................................. 16
Duration/charges ............................. 16
Voice message/mailbox .................. 17
SMS .................................................. 18
MMS ................................................. 18
Message lists/settings ...................... 19
Ring tones ........................................ 20
Ringer setting ................................ 20
Silent alert ..................................... 20
Volume ......................................... 20
More tones... ................................. 20
Surf & fun ......................................... 21
Internet browser ........................... 21
Games & more .............................. 21
Setup ................................................ 22
Profiles .......................................... 22
Display .......................................... 23
Call setup ...................................... 23
Clock ............................................. 24
Connectivity .................................. 24
Security ......................................... 25
Network ........................................ 26
Accessories ................................... 27
Organizer ......................................... 27
Alarm clock ................................... 27
Calendar ....................................... 27
Appointments ............................... 27
Notes ............................................ 28
Missed alarms ............................... 28
Time zones .................................... 28
Calendar setup .............................. 28
Extras ............................................... 29
Fast access key ................................. 31
Own stuff ......................................... 32
Customer Care ................................. 33
Care and maintenance ..................... 34
Product data ..................................... 35
SAR ................................................... 36
Guarantee ........................................ 36
License Agreement .......................... 38
Accessories ...................................... 40
Index ................................................ 41
See also In-
dex at the end
of this User
Guide
Table of
Contents

Safety precautions2
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
left page (2) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
Remember to comply with
legal requirements and local restric-
tions when using the phone. For ex-
ample, in aeroplanes, petrol
stations, hospitals or while driving.
Mobile phones can interfere with the
functioning of medical devices such
as hearing aids or pacemakers.
Keep at least 20 cm/9 inches be-
tween phone and pacemaker. When
using the mobile phone hold it to the
ear which is further away from the
pacemaker. For more information
consult your doctor.
Small parts such as the SIM card,
sealing stop, lens ring and lens cap
can be dismantled and swallowed by
small children. The phone must
therefore be stored out of the reach
of small children.
The mains voltage specified on the
power supply unit (V) must not be
exceeded. Otherwise the charging
device may be destroyed.
The power supply must be plugged
into an easily accessible AC mains
power socket when charging the
battery. The only way to turn off the
charging device after charging the
battery is to unplug it.
The ring tone (p. 20), info tones and
handsfree talking are reproduced
through the loudspeaker. Do not
hold the phone to your ear when it
rings or when you have switched on
the handsfree function (p. 11). Oth-
erwise you risk serious permanent
damage to your hearing.
Do not place the phone near to elec-
tromagnetic data carriers such as
credit cards and floppy disks. Infor-
mation stored on them could be lost.
Only use original Siemens batteries
(100% mercury-free) and -charging
devices. Otherwise you risk serious
damage to health and property: The
battery could explode, for instance.
You may only open the phone to re-
place the battery (100 % mercury-
free) or SIM card. You must not open
the battery under any circumstanc-
es. All other changes to this device
are strictly prohibited and will invali-
date the guarantee.
Do not look at the LED (e.g. activat-
ed infrared port, flash LED) with opti-
cal magnifiers because of radiation.
This product complies with IEC/EN
60825-1 “Safety of Laser Products”
for LED Class 1M products; such
products are safe under reasonably
foreseeable operating conditions.

3Safety precautions
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
right page (3) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
All electrical and electronic products
should be disposed of separately
from the municipal waste stream via
designated collection facilities ap-
pointed by the government or the lo-
cal authorities.
This crossed-out wheeled bin sym-
bol on the product means the prod-
uct is covered by the European
Directive 2002/96/EC.
The correct disposal and separate
collection of your old appliance will
help prevent potential negative con-
sequences for the environment and
human health. It is a precondition for
reuse and recycling of used electri-
cal and electronic equipment.
For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
The phone may cause interference
in the vicinity of TV sets, radios
and PCs.
Use only Siemens original accesso-
ries. This will avoid potential risks to
health or property and ensure com-
pliance with all relevant regulations.
Improper use will invalidate the guarantee!
These safety instructions also apply to Siemens
original accessories.
As mobile devices offer a range of functions, they
can be used in positions other than the head, such
as on the body. In this case, separation distance of
1.5 cm is required.

Overview of the phone4
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
left page (4) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (11.08.2005, 15:36)
Overview of the phone
1Display indicators
Signal strength/GPRS/battery level.
2Soft keys
Press the soft key to call up the function
that is displayed as §Text§ or icon on the
grey fields above the key.
3ACall key
Dial displayed phone number or name,
accept calls. In standby mode: Display the
last calls.
4BOn/Off/End key
• Switched off: press and hold to
switch on.
• During a conversation or in an
application: press briefly to finish.
• In menus: press briefly to go back a
level. Press and hold to return to
standby mode.
• In standby mode: press and hold to
switch off phone.
5Navi-key
In lists and menus:
GScroll up and down.
DFunction call.
CBack a menu level.
During a call:
EIncrease volume.
FDecrease volume.
In standby mode:
EVoice control (press and hold).
FOpen Addressbook/Phonebook.
DOpen menu.
CGPRS info.
6*Press and hold
• In standby mode: switch on/off all
signal tones (except alarm).
• For incoming calls: only switch off ring
tones.
7Press and hold
In standby mode: switch key lock on/off.
8 Plug socket
For charger, headset, camera etc.
9 Infrared interface (IrDA)
_ªg
Service provider
17.04.2005 09:15
NewMMS Menu

5Display symbols
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
right page (5) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (11.08.2005, 15:36)
Display symbols
Display symbols (selection)
_Signal strength
hCharging
dBattery charge level, e.g. 50%
èAddressbook/Phonebook
ZCall records
ÉSurf & fun/Service provider portal
çOrganizer
]Messages
Ring tones
Extras
ÑOwn stuff
mSetup
nCall(s) is/are diverted
jRinger off
kShort ring (beep) only
lRingtone only, if the caller is stored in
the Addressbook/Phonebook
ØAlarm set
ÖAlarm clock activated
µKeypad locked
TMessage memory full
²No network access
ABC/
Abc/abc
Indicates whether upper or lower-
case letters are active
T9Abc Text input with T9
«Activated and available
ªRegistered
Temporarily interrupted
ÊInternet online
ËInternet via GPRS online
ÌInternet no network
±Auto answer feature on
Organiser symbols (selection)
uMemo
vCall
wMeeting
{Birthday
ÈAnniversary
Access with left soft key (selection)
…Message received
ÛMMS notification received
\Voice message received
Unanswered call
Depending on the service provider, some of the
symbols shown here may vary from those in the
phone.

Getting started6
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
left page (6) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Getting started
Using the SIM card/battery
Your phone's display is delivered with a
protective film. Remove this film before get-
ting started. The service provider supplies
you with a SIM card on which all the im-
portant data for your account is stored. If
the SIM card is credit card-sized, snap out
the smaller segment and trim any rough
edges.
Press depression 1to remove the
cover downwards in the direction of the
arrow 2.
Insert SIM card 3and push it fully into
the locating slot (make sure the angled
corner is in the correct position 4).
To remove the SIM card push the card
here 5.
Insert the battery sideways into the
phone 6, then press downwards 7
until it engages.
To remove, press the retaining tab 8
then lift the battery out.
Place cover on phone and push to the up-
per edge, until it clicks into place 9.
Always switch off phone before removing
the battery!
Only 3V and 1.8V SIM cards are support-
ed. Please contact your service provider if
you have an older card.
Charge battery
The battery is not fully charged when de-
livered. Plug charger cable into the bot-
tom of the phone, plug power supply unit
into a mains power socket and charge for
at least two hours. The power supply unit
heats up when used for long periods. This
is normal and not dangerous.
1
2
3
4
5
7
8
6
9

7Switch on/off, PIN
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
right page (7) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
When charging is in progress his
displayed.
Charging time
An empty battery is fully charged after
about 2 hours. Charging is only possible
within a temperature range of
+5 °C to +40 °C. If the temperature ris-
es/falls 5 °C above/below this, the charge
symbol flashes a warning. The mains volt-
age specified on the power supply unit
must not be exceeded (Operating time,
p. 35).
Charge icon not visible
If the battery has been discharged fully
the charge icon is not immediately visible
when the power supply unit is plugged
in. It will appear after up to two hours. In
this case the battery is fully charged after
3-4 hours.
Only use the power supply unit provided!
Display while in service
Charge level display during operation
(empty - full): adg.
A beep sounds when the battery is nearly
empty. The charge level of the battery is
only displayed correctly after an uninter-
rupted charging/discharging cycle. You
should therefore not remove the battery un-
necessarily and where possible not termi-
nate the charging process early.
Switch on/off, PIN
Switch on/off
Press and hold the On/Off/End key Bto
switch on or off.
Enter PIN
The SIM card can be protected with a
4- to 8-digit PIN.
Enter the PIN using the number keys. The
characters **** appear to ensure no-
body can read your PIN on the display.
Correct errors with §Clear§.
Confirm your input with §OK§. Logging on
to the network will take a few seconds.
Emergency number (SOS)
Only to be used in real emergencies!
By pressing the soft key §SOS§ you can
make an emergency call on any network
without a SIM card and without entering a
PIN (not available in all countries).
Switching on your phone for the
first time
Time/date
Set the clock to the right time once at
start-up.
Press §Yes§. First enter the date
(day/month/year), then the time
(24 hours, including seconds). Press §OK§.
The time and date are updated.
If the battery is removed for longer than
30 seconds, the clock will be reset.
Time zones
Set the time zone for your area.
Select the required time zone from list
with G. Apply with §Set§.

General instructions8
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
left page (8) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Phonebook or Addressbook
You can choose whether you want to use
the Phonebook on the SIM card or the in-
ternal Addressbook as standard.
You can copy the SIM card Phonebook to
the Addressbook on the phone. Please do
not interrupt this procedure. During this
time do not accept incoming calls. Follow
instructions in the display.
To copy data on the SIM card at a later
time, highlight entries (see p. 9) and copy
these with the function Copy into 9
(Phonebook options menu).
You can change the default book at any
time (p. 14).
Signal strength
_Strong reception signal.
^A weak signal reduces the call
quality and may lead to loss of
the connection. Change your
location.
General instructions
User guide
The following symbols are used to explain
operation:
JEnter numbers or letters.
BOn/Off/End key.
ACall key.
DPress navigation key on the side
indicated
§Menu§ Displays a soft-key function.
LFunction depends on the service
provider, special registration
may be necessary.
Without SIM card
If you switch on the phone without
a SIM card you can still use some phone
functions.
Press §Menu§. The functions are displayed
(e.g. Emergency, SOS).
Menu control
The steps needed to reach a function are
shown in a condensed form in this user
guide.
E.g. to display call list for missed calls:
Press §Menu§ ¢Z¢Calls missed
¢§Select§.
This comprises the following steps:
Open main menu, select Z, then select
the function Calls missed. You have to
confirm with §Select§.
Standby mode
Very often function descriptions begin in
standby mode.
The phone is in standby mode and is ready
for use when the name of the service pro-
vider appears on the display.
Press and hold the On/Off/End key B
to return to standby mode from any
situation.

9Standard functions
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
right page (9) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Standard functions
Option menus
Menu functions are made available in op-
tions menus. A selection of functions that
occur frequently is shown here.
Press §Options§ to open menu.
Highlighting mode
With some applications (e.g. Phonebook)
one or more entries in a list can be high-
lighted to perform multiple functions at
once.
Press §Options§ ¢Mark text.
Press §Mark text§ to highlight an unmarked
entry.
Press §Unmark§ to unmark a highlighted
entry.
Additional highlighting functions:
Security
§Menu§ ¢m¢Security
¢Select function.
The phone and SIM card are protected
against misuse by several security codes.
Keep these confidential numbers in a safe
place where you can access them again if
required.
Codes
PIN control
You can stop the PIN prompt being
activated when the phone is switched on,
but you then risk unauthorised use of the
phone.
Press §Change§. Enter PIN and confirm
with §OK§.
Change PIN
You can change the PIN to any 4- to 8-dig-
it number you find easier to remember.
Enter current PIN and confirm with §OK§.
Enter new PIN twice and confirm each
time with §OK§.
Change PIN2
(Display only if PIN2 is available). Proceed
as with Change PIN.
Edit Open the entry to edit.
Capacity Display available capacity.
View Display entry.
Delete /
Delete all Delete entry/delete all entries af-
ter confirmation.
New entry Create new entry.
Send MMS Send entry as MMS message.
Send via... Select transmission service and
medium for sending or printing
e.g. IrDA.
Save Store entry.
Sort Set sort criteria
(alphabetical, type, time).
Text input
(p. 11)
T9 preferred: Activate/
deactivate T9 input.
Input language: Select
language for text.
Rename Rename selected entry.
Mark all Highlight all entries.
Unmark all Delete highlighting on all
marked entries.
Delete
marked All selected entries are deleted.

Calling10
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
left page (10) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Change phonecode
You define the phone code (4-8 digits)
when you call up a protected function for
the first time. It is then valid for all phone-
code protected functions. If the wrong
code is entered three times then the
phone will be locked. Contact Siemens
Customer Care for instructions on how to
unlock your pone.
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter the
PUK (MASTER PIN), provided by your serv-
ice provider with the SIM card, according
to instructions. If the PUK (MASTER PIN)
has been lost, please contact your service
provider.
Preventing accidental activation
Even if PIN control is deactivated confir-
mation is required to switch on the
phone.
This prevents the phone from being
switched on accidentally, e. g. when car-
ried in a pocket or whilst you are on an
aircraft.
Press and hold the On/Off/End key B
and confirm with §OK§. The phone
switches on.
Calling
Dialling with number keys
The phone must be switched on (standby
mode). Dial number (always with area
code, if necessary with international dial-
ling code). To dial international dialling
code press and hold 0until a "+" is dis-
played. Press §+List§ and select country.
Short press §Clear§ to clear the last digit, a
long press clears the entire phone
number. To dial press the Call key A.
End call
Press the End key Bbriefly. Press this
key even if the person on the other end of
the line has hung up first.
Set volume
Use navigation key Eto start adjusting
the volume during conversation. Set vol-
ume with navigation keyG.
If a Car Kit is used, its volume setting will
not affect the usual setting on the phone.
Redial
To redial numbers that were dialled previ-
ously, press the Call Key Aonce, pick up
the required phone number from the list
with G, then press Aagain.
If the number is busy
Press §Auto dial§ for automatically dialling
the phone number ten times at increas-
ing time intervalls or press §Call back§ (L)
for phone ringing when the busy number
is free. Press §Prompt§ and a beep reminds
you to redial the dispayed phone number
after 15 minutes.
Accept call
The phone must be switched on (standby
mode). An incoming call will interrupt
any other use of the phone. Press §Answer§
or A.
Please make sure you have accepted the call
before holding the phone to your ear. This will
avoid damage to your hearing from loud ring
tones!

11Text entry
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
right page (11) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
A phone number transmitted by the net-
work is displayed or the corresponding
name if it is contained in the Phonebook
(p. 14) or Addressbook (p. 15). A picture
may also appear (settings p. 15).
Reject call
§Reject§ or Bpress briefly.
Handsfree
You can put the phone aside during a call.
You can then hear the caller via the
loudspeaker.
Activate handsfree function with §Handsfr.§
and switch on with §Yes§.
Adjust the volume with E. Pressing
§Handsfr.§ switches off "handsfree talking".
Always switch off "handsfree talking" before
holding the phone to your ear! This will avoid
damage to your hearing!
Swapping between 2 calls b
Make a new connection during a call with
ymenu§ ¢Hold ¢J(dial a new phone
number). With ymenu§ ¢Swap you can
swap back and forth between both calls.
If you are called during a phone call and
you can hear the "call waiting tone"
(p. 23), you can accept the waiting call
with §Swap§,putting the current call on
hold to do so.
Swap back and forth between the calls
see above or end the current call with B
and accept the new call with §Answer§.
Conference
Call up to 5 parties and link them togeth-
er in a conference call. Make a new con-
nection during a call with ymenu§ ¢Hold
¢J(dial a new phone number). The
current call is set on hold. With ymenu§
¢Conference you can join the held call
when the connection is established.
Repeat this procedure until all partici-
pants are linked together.
All calls in the conference are ended si-
multaneously when the End key Bis
pressed.
Direct call
If this is active, only one number can be
dialled.
§Menu§ ¢m¢Security ¢Direct call
Press Dand enter phone code. The
phone code (4- to 8-digits) is set by you
and entered at the first security setting.
Please note this code down (see also p. 9)!
Confirm code input with §OK§. Press
§Change§ and enter number (press ·to
select phone number from the Adress-
book p. 15 or Phonebook p. 14). Confirm
"On" with §OK§.
To dial, press and hold the right soft key.
To switch direct call off, press and hold .
Enter phone code and confirm with §OK§.
Press §Change§ and Confirm Off with §OK§.
Text entry
Text entry without T9
Press number key repeatedly until the re-
quired letter appears. After a brief interval
the cursor will advance. Example:
2Press once briefly to type the let-
ter a, twice to type b, etc. Press
and hold to write the number.
Ä,ä,1-9 Umlauts and numbers are dis-
played after the relevant letters.

Text entry12
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
left page (12) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
§Clear§ Press briefly to delete the letter
before the cursor, press and hold
to erase the whole word.
H/GMove the cursor
(forwards/back).
Press briefly: Swap between abc,
Abc, T9abc, T9Abc, T9ABC, 123.
Status shown in top line of
display.
Press and hold: All inputvariants
are displayed.
*Press briefly: Special characters
are shown.
Press and hold: Open input
menu.
0Press once/repeatedly:
. , ? ! ’ " 0 - ( ) @ / : _
Press and hold: Writes 0.
1Writes blank. Press twice = jumps
a line.
Special characters
Press *briefly. The character map is
displayed:
1) Line break
Navigate to characters with G,Hand
press §Select§.
Input menu
Press and hold*with text input. The input
menu ist displayed:
Text format (SMS only), Input language, Mark
text, Copy/Add
Text entry with T9
"T9" deduces the correct word from the
individual key entries by making compari-
sons with an extensive dictionary.
Activate, deactivate T9
§Menu§ ¢]¢Message setup
¢T9 preferred ¢§Change§
(activate/deactivate T9).
Select Input language
Select the language in which you want to
compose your message.
§Menu§ ¢]¢Message setup
¢Input language ¢§Select§ (the new
language is set)
Languages with T9 support are marked
with the T9 symbol.
Write a word using T9
Since the display changes as you proceed,
it is best if you finish a word without look-
ing at the display.
Simply press the keys once only where the
relevant letter is located. For "hotel", for
example:
Press briefly for T9Abc then
46835and 1(the blank ends a
word).
Do not use special characters such as Ä
but rather use the standard characters,
e.g. A; T9 will do the rest for you.
Additional information
0Set a full stop. A word is conclud-
ed if it is followed by a space.
Within a word, a full stop repre-
sents an apostrophe or hyphen:
e.g. §provider.s§ = provider’s.
DGo to the right. Ends a word.
1) ¿¡_;.,?!+
-"’:*/()¤¥
$£€@\ &#[ ] {
} %~<=>| ^§Γ
∆ΘΛΞΠΣΦΨΩ

13Text entry
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
right page (13) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Press briefly: Swap between: abc,
Abc, T9abc, T9Abc, 123. Status
shown in top line of display.
Press and hold: All input modes
are displayed.
*Press briefly: Select special
characters (p. 12).
Press and hold: Open input menu
T9 word suggestions
If several options are found in
the dictionary for a key sequence
(a word), the most probable is displayed
first. If the word you want has not been
recognised, the next suggestion from T9
may be correct.
The word must be §highlighted§. Then press
». The displayed word is replaced
with a different word. If this word is also
incorrect, repeat until the correct word is
displayed.
To add a word to the dictionary, select
§Spell§. Now write the word without T9-
support and accept with §Save§ into the
dictionary.
Correct a word
Words written with T9:
With Hmove left or right, word
by word, until the required word is
§highlighted§.
With »scroll through the T9 word
suggestions again. §Clear§ deletes the char-
acter to the left of the cursor and displays
a new possible word!
Words not written with T9:
With Hmove letter by letter to the
left/right. §Clear§ deletes the letter to the
left of the cursor. New characters are in-
serted at the cursor position.
Text modules
Text modules can be stored in the phone
for adding to your messages (SMS, MMS).
Write text modules
§Menu§ ¢]¢Text modules
¢<New entry> ¢J(write text mod-
ule) ¢§Save§ (Accept the default name or
give it a new name, then save with §OK§)
Use text modules
J(write message text) ¢§Options§
¢Text modules ¢G(select text mod-
ule from the list) ¢D(confirm Text
module) ¢§OK§.
The predefined text is inserted into the
text to the left of the cursor.
T9® Text Input is licensed under one or more of
the following:
U.S. Pat. Nos. 5,818,437, 5,953,541, 5,187,480,
5,945,928 and 6,011,554;
Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.

Default book14
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
left page (14) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Default book
§Menu§ ¢è¢Select function.
Show entries
Entries in the standard directory (Address-
book or Phonebook) are shown for
selection.
Select a name by entering the first letter
Jand/or scroll G. To dial press the
Call key A.
<New entry>
Create new entry in standard directory.
Phonebook, Addressbook (see below).
Default book
Select the Phonebook (only one phone
number possible per entry) or the Ad-
dressbook as your standard directory (de-
fault book). Your preference should be for
the Addressbook, because more entries
and functions (e.g. pictures, birthdays,
several phone numbers per entry, etc.)
are possible.
F¢Phonebook / Addressbook ¢D
(set as standard)
Groups
(see p. 15)
Businesscard
Create your own business card. Send it as
an SMS/MMS to another GSM-phone.
If no business card has been created yet,
you will be asked for your input.
GMove from field to field to put in
your details. Press §Save§.
Information numbers
Information numbers are stored here in
accordance with the respective service
provider.
Phonebook
Entries in the Phonebook (on the SIM
card) are managed separately from those
in the Addressbook. You can, however,
exchange data between the Phonebook
and the Addressbook.
<New entry>
If the Phonebook is set as standard (Ad-
dressbook as standard):
Open Phonebook (in standby mode)
F¢<New entry> ¢Select entry field
(The maximum number of characters
available is displayed at the top of the
screen)
Number: Always enter phone number with
dialling code.
Name: Enter first and/or last names.
Group: Phone numbers may be assigned
to the VIP group.
Location Select the storage location SIM or
Protected SIM (PIN2 required).
Record no.: Is automatically assigned to
the entry.
Press §Save§ to store the new entry.
Call (search for an entry)
Open phonebook F, select name and
and press the Call key A.
Change entry
F¢Select entry ¢D¢Change
¢Make changes ¢§Save§.
<Special books>
<Own numbrs>: enter personal phone
numbers, <VIP numbers>: assign important
numbers to group, <SIM phonebook>,
<Protected SIM>, <Info numbers>.

15Addressbook
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
right page (15) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Addressbook
The Addressbook can store up to
500 entries that are managed in the
phone memory.
<New entry>
If the Addressbook has been selected as
standard:
Open Addressbook (in standby mode)
F¢D¢J(enter first and/or
last name) ¢Select entry field ¢Make
further entries ¢§Save§.
Group
Entries can be organized by groups. Se-
lect with §Change§.
Picture
Press §Select§. Assign a picture to an Ad-
dressbook entry. It is displayed if you are
called by the corresponding phone
number.
Birthday
After entering the date of birth, the "re-
minder box" can be activated. You can
now enter the time for the reminder. The
phone will then remind you with an ac-
coustic tone and also with a display
one day before the birthday and on the
birthday.
All fields
Press §Select§. Show all input fields if the
display was previously reduced (§Options§,
Field setup).
Change entry
F¢Select entry ¢§View§ ¢§Edit§
¢Make changes ¢§Save§.
Call (search for an entry)
Open Addressbook F, select name and
and select phone number (if the entry has
several numbers stored) press A.
Voice dialling
Dial numbers by voice command. Up to
20 recorded names for voice dialling or
voice commands (p. 30) can be saved on
the mobile (not on the SIM card).
Record
Open Addressbook (in standby mode).
F¢Select entry (first letter and/or
scroll) ¢§Options§ ¢Voice dialling
¢(Select phone numbers if there are
more than one ¢§Record§ ¢§Start§.
A short signal sounds. Now speak the
name. After a second beep and message
in the display, repeat the name. A beep
now confirms the recording, which is
saved automatically.
Apply voice dialling
Press and hold E(in standby mode).
Now speak the name. The number is
dialled.
Groups
Nine groups are specified in your phone
to enable you to arrange your Address-
book entries clearly.
You can rename seven groups:
Open Addressbook (in standby mode)
F¢<Groups> (the number of entries
is listed behind the group name)
¢Select group ¢D¢Rename group
Additional information
No group: Contains all Addressbook en-
tries that do not belong to a group (name
cannot be changed).

Records16
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
left page (16) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Received: Contains vCard Addressbook
entries received by SMS (name cannot
be changed).
Group symbol
Assign to a group a symbol that appears
on the display when one of its members
calls you.
Select group ¢D¢Group symbol
¢Select symbol ¢§OK§.
Records
Your phone stores the phone numbers of
calls for convenient redialling.
§Menu§ ¢Z¢§Select§ ¢Select call list
and confirm ¢Select phone number
¢A.
Calls missed b
The phone numbers of calls that you have
received but not answered are stored for
call back purposes. is shown on the
display for missed calls in standby mode.
Calls received b
Accepted calls are listed.
Calls dialled
In standby mode you have access to the
last numbers dialled with A.
Delete records
The records are deleted.
Call list menu
§Options§ ¢Edit entries.
Duration/charges b
Display charge details and the duration of
different types of calls while you speak, as
well as setting a unit limit for outgoing
calls.
§Menu§ ¢Z¢Duration/charges
Select function: Last call, All outgoing calls,
All incoming calls, Remaining units
§Select§ Display data.
§Reset§ Clear display.
§OK§ End display.
Charge setting
§Menu§ ¢Z¢Duration/charges
¢Charge setting
Currency (PIN2 prompt) b
Currency for charge display.
Personal rate (PIN2 prompt) b
Charges per unit/period.
Account limit (PIN2 prompt) b
Fix a credit/usage period on a special
SIM card.
Auto display
Display duration and charge automatical-
ly at end of each call.

17Voice message/ mailbox
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
right page (17) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Voice message/
mailbox
§Menu§ ¢]¢Message setup
¢Voice message
Most service providers offer a mailbox, in
which a caller may leave a voice message
for you
• if your phone is switched off or not
ready to receive,
• if you do not want to answer,
• if you are making a phone call (and Call
waiting is not activated, p. 23).
You may have to register for this service
with the service provider and enter the
settings manually.
Settings b
The service provider supplies you with
two phone numbers:
Save mailbox number
Call this phone number to listen to the
voice messages left for you.
§Menu§ ¢]¢Message setup ¢Voice
message ¢J(enter mailbox number)
¢§OK§.
Save call divert number
Calls are diverted to this phone number
(see also p. 23).
§Menu§ ¢m¢Phone setup ¢Divert
¢e.g., All Unanswered ¢Set ¢J
(dial divert number) ¢§OK§ (register
number at the network). Divert will
be confirmed after a few seconds
(see also p. 23).
Listening to message b
A new voice message can be announced
as follows: An \icon with beep or …
a text message announces a new voice
mail or you receive a call with an
automatic announcement. Dial into your
mailbox and listen to your message(s).
Press and hold 1(if necessary enter mail-
box number once only). Confirm with §OK§
and §Mailbox§ depending on your service
provider.
CB services b
§Menu§ ¢]¢Message setup ¢CB
services
Some service providers offer information
services (info channels). If reception is ac-
tivated, your "Topic list" will supply you
with messages on the activated topics.

SMS18
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
left page (18) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
SMS
You can transmit and receive very long
messages (up to 760 characters) on your
phone. They are automatically composed
of several "normal" SMS messages (note
higher charges).
Additionally you can insert pictures and
sounds in an SMS.
Depending on the service provider,
e-mails and faxes can also be sent and
e-mails received via SMS (change setting
if necessary, p. 19).
Writing and sending
§Menu§ ¢]¢New SMS ¢J(write
text) ¢A¢·/J(enter phone
number or select from Address-
book/Phonebook) ¢§OK§.
The SMS is sent to the service centre for
transmission.
For Text input using "T9", p. 12. Press
§Clear§ briefly to delete letter by letter, press
and hold to delete an entire word.
Special functions
SMS to group
You can send an SMS message as a "circu-
lar" to a recipient group.
§Options§ ¢Send ¢§Group§ ¢Select
group ¢Select group members and
send SMS.
Picture&sound
Insert pictures and sounds into message.
§Options§ ¢Picture&sound ¢select sec-
tion and entry.
The menu contains:
Fix animations, Fix sounds, Own animation,
Own pictures, Own sounds
Receive/read SMS
An arrival of a new SMS is announced on
display with …. To read the SMS, press
left soft key.
With Gyou scroll through message line
by line. Select §Reply§ for a direct reply.
SMS archive
§Menu§ ¢]¢SMS archive
The list of SMS messages stored in the
phone is displayed.
MMS
The Multimedia Messaging Service ena-
bles you to send texts, pictures (also pho-
tos) and sounds in a combined message
to another mobile phone or to an e-mail
address. All elements of an MMS message
are merged to form a "slide show".
Depending on your phone's settings, you
will receive either the complete message
automatically or notification that an MMS
has been saved in the network, giving
sender and size details. You may then
download it to your phone to read it.
Ask your service provider whether this
service is available. You may need to reg-
ister for this service separately.
Writing/sending MMS messages
An MMS consists of the address header
and the content.
§Menu§ ¢]¢New MMS
Input fields:
To: ·/JPhone number/
e-mail address of recipient(s).
Subject: Enter MMS heading (up to
40 characters).

19Message lists/settings
© Siemens AG 2004, C:\Daten_itl\Siemens\DTP-Satz\Produkte\AX75_Pegasus_3\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050613
right page (19) of AX75 Pegasus FUG, en, A31008-H2850-A1-3-7619 (12.08.2005, 12:23)
Picture: §Insert§. The picture list is opened
for selection.
Text: §Edit§. Write text with the help
of T9.
Sound: §Insert§. Select a melodie (p. 32) or
record a new melody (see
below).
Slide duration:
Enter length of display
for individual pages (minimum
0.1 seconds).
New recording
The phone records via its microphone.
Press §Insert§ in the Sound: field when com-
pleting the input fields. Select Record new.
Press §Record§. The current recording dura-
tion and available time remaining are dis-
played. To end recording press §Stop§.
Press §Play§ to replay recording. Press §Save§.
To give the recording its own name, the
description §Clear§. Confirm with §OK§.
Attach extra pages
§Options§ ¢New slide
Attach business card
§Options§ ¢Extras ¢GScroll to
Business card ¢·.
Attach appointment
§Options§ ¢Extras ¢GScroll to
Appointment ¢·.
Send MMS
§Options§ ¢Send
Receive/read MMS
An arrival of a new MMS/notification of
an MMS is announced on display with
…/ Û. Press the left soft key to read
the MMS or notification.
Depending on the setting, (p. 20) the
• complete MMS is received
• or the notification is opened. Press
§Receiving§ to receive the complete MMS,
with §Play§ automatic presentation of
the MMS. Cancel using any key.
•Openattachmentsusing§Options§ and
Attachments.
• Open images and tones using §Options§
and Content.
Message lists/settings
All SMS and MMS messages are saved in
four different lists:
Inbox
§Menu§ ¢]¢Inbox ¢MMS/SMS
The list of SMS, MMS and CB messages
received is displayed. To receive an
MMS subsequently, open notification and
press §Receiving§.
Draft
§Menu§ ¢]¢Draft ¢MMS/SMS
The list of stored drafts is displayed.
Unsent
§Menu§ ¢]¢Unsent ¢MMS/SMS
The list of MMS messages not yet success-
fully sent or not yet completely sent con-
catenated SMS messages is displayed.
Sent
§Menu§ ¢]¢Sent ¢MMS/SMS
The list of sent SMS or MMS messages
is displayed.