Siemens M65 User manual

Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2004
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
www.siemens-mobile.com
cyan magenta yellow black LIEBREICH, Medienproduktion
s
mobile
s
mobile
M65
BA M65.QXD 20.02.2004 15:27 Uhr Seite 1

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65KIVZ.fm
Table of Contents 1
VAR Language: en; VAR issue date: 041104
This is a summarised version of the Operating Guide. The
complete version can be found on the Internet at this address:
www.siemens.com/m65
Safety precautions ..................... 2
Overview of the phone .............. 4
Display symbols ......................... 6
Getting started ........................... 7
Switching phone on and off/
entering PIN ............................. 10
General instructions ................ 11
Standard functions .................. 13
Security .................................... 14
Text entry ................................. 16
Calling ...................................... 18
Default book ............................ 20
Addressbook ............................ 21
Phonebook ............................... 23
Call records .............................. 25
Camera ..................................... 26
Message overview ................... 28
SMS .......................................... 29
MMS ......................................... 31
E-mail ........................................ 35
Voice message/CB ..................... 36
Surf & fun ................................. 37
Setup ........................................ 40
Fast access ................................50
Organiser ..................................51
Extras ........................................ 53
My stuff .................................... 55
Customer Care .......................... 56
Care and maintenance ............. 58
Product data ............................. 59
Guarantee certificate (UK) ....... 60
Guarantee certificate (IRL) ....... 61
SAR ........................................... 63
Menu tree ................................. 64
Index ......................................... 70
Table of Con-
tents
This is a sum-
marised ver-
sion of the
Operating
Guide. The
complete ver-
sion can be
found on the
Internet at this
address:
www.sie-
mens.com/m6
5
right page (1) of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:46)

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_SecurityInfo.fm
left page (2)of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:32)
Safety precautions2
VAR Language: en; VAR issue date: 041104
Safety precautions
Information for parents
Please read the user guide and safety precautions carefully before use.
Explain the content to your children and the hazards associated with using the phone.
Remember to comply with legal
requirements and local restric-
tions when using the phone. For
example in aeroplanes, petrol
stations, hospitals or while driv-
ing.
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids or
pacemakers. Keep at least
20 cm/9 inches between phone
and pacemaker. When using
the mobile phone hold it to the
ear which is further away from
the pacemaker. For more infor-
mation consult your doctor.
Ringtones (p. 42), info tones
(p. 44) and handsfree talking
(p. 18) are reproduced through
the loudspeaker. Do not hold
the phone to the ear when it
rings or when you have
switched on the handsfree func-
tion. Otherwise you risk serious
permanent damage to your
hearing.
Do not use an optical magnifier
to look at the activated infrared
interface [Class 1 LED product
(classification as per
IEC 60825-1)].
Only use original Siemens
charging devices and batteries
(100 % mercury-free). Other-
wise you risk serious damage to
health and property. The battery
could explode, for instance.
Small parts such as the SIM
card, sealing stop, lens ring and
lens cap can be dismantled and
swallowed by small children.
The phone must therefore be
stored out of the reach of small
children.
The mains voltage specified on
the power supply unit (volt)
must not be exceeded. Other-
wise the charging device may
be destroyed.
The mains adapter must be
connected to an easily accessi-
ble power socket to charge the
battery. After charging the bat-
tery, the charger can only be
switched off by unplugging it.

right page (3)of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:32)
©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_SecurityInfo.fm
3Safety precautions
VAR Language: en; VAR issue date: 041104
Do not open the phone. Only
the battery and SIM card may
be replaced. You must not open
the battery under any circum-
stances. Any other changes to
this device are strictly prohibited
and will invalidate the operating
licence.
Important:
Dispose of used batteries and
phones according to the legal
regulations.
Mobile phones can interfere
with the operation of nearby
TVs, radios or PCs.
Use only original Siemens
accessories. This will avoid
potential risks to health or prop-
erty and ensure compliance
with all relevant regulations.
Improper use will invalidate the guarantee!
These safety precautions also apply to
original Siemens accessories.
As mobile devices offer a range of func-
tions, they can be used in positions other
than the head, such as on the body. In this
case, at data transfer (GPRS) a separation
distance of 1.5 cm is required.

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Overview.fm
left page (4)of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
Overview of the phone4
VAR Language: en; VAR issue date: 041104
Overview of the phone
1BOn/Off/End key
• Switched off: press and hold to switch
on.
• During a conversation or in an appli-
cation: press briefly to finish.
• In menus: press briefly to go back a
level.
Hold down to return to standby mode.
• In standby mode: hold down to switch
off phone.
2ACall key
Dial displayed/highlighted phone num-
bers/names, take calls. Show last
phone numbers dialled in standby
mode.
3Display in standby mode
4Soft keys
The current functions of this key are
shown in the bottom line of the display
as §Text§/symbol (e.g. p).
5Joystick
CPress the joystick vertically
downwards to start an applica-
tion or function.
In standby mode:
COpen main menu.
GOpen user profiles.
HOpen Phonebook/Address-
book.
EOpen Inbox.
DStart the camera.
In lists, messages and menus:
IScroll up and down.
DBack one level.
During a call:
ISet volume.
ECall options.
Z£X
Service provider
01.05.2004 10:10
NewMMS Menu

right page (5) of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Overview.fm
5Overview of the phone
VAR Language: en; VAR issue date: 041104
1Loudspeaker
2LED for dynamic light (p. 42)
3Infrared interface (IrDA)
4*Ringtone
•Hold down in standby mode:
Switch all audible signals on/off
(except alarm).
•Hold down on incoming call:
Switch off ringtone for this call only.
5#Key lock
Hold down in standby mode:
Switch key lock on/off.
6Connection socket
For charger, headset, flash etc.
7Integrated antenna
Do not obstruct the phone above the
battery cover unnecessarily. This
reduces the signal quality.
8Connection for external antenna
9 Camera lens
Z£X
Service provider
01.05.2004 10:10
NewMMS Menu

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Displaysymbols.fm
left page (6)of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
Display symbols6
VAR Language: en; VAR issue date: 041104
Display symbols
Display symbols (selection)
ZSignal strength
WBattery charge level,
e.g. 50 %
LPhonebook
PCall records
OSurf & fun/
Service provider portal
QOrganiser
MMessages
RCamera
SExtras
NMy stuff
TSetup
ÇAll calls diverted
¿Ringing tone off
¾Short ring (beep) only
¼Ringtone only if the caller is
stored in the Phonebook.
¹Alarm set
ÄKeypad locked
ÅAuto. answer on
£Activated and available
²Browser online
®IrDA transmission
Events (selection)
ãSMS memory full
äMMS memory full
åPhone memory full
ÆNo network access
ÂMissed call
ÊDelete assistant
Message symbols (selection)
pUnread
qRead
sSent
wMMS notification
yMMS with DRM contents
(p. 11)
zE-mail forwarded
{E-mail with attachment
ÀVoice mail received

right page (7)of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Startup.fm
7Getting started
VAR Language: en; VAR issue date: 041104
Getting started
The phone must be assembled
before you can get started.
SIM card and battery
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then slide the SIM
into the holder 1).
• Insert the battery sideways into
the phone 2, then press it down-
wards 3until it clicks into place.
Battery cover
• Pull the rubber gasket over the
locating lugs 1on the cover, then
push it onto the four studs 2so
that it is firmly positioned on the
cover.
• Push cover forwards 3until the
locating lugs engage in the open-
ings in the phone.
Additional information
Your phone's display is supplied with a
protective film. Remove this film slowly
before assembling the phone. In rare
cases, static discharge may cause
discolouration at the edges of the display.
However this will disappear within approx.
10 minutes.

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Startup.fm
left page (8)of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
Getting started8
VAR Language: en; VAR issue date: 041104
Metal bracket
• Slide the metal bracket open until
the openings in the metal bracket
and in the cover are directly above
each other 1. The hooks 2
must engage in the openings on
the front of the phone.
• Insert the locking catch into the
metal bracket 3and turn it ninety
degrees to the right 4to join the
metal bracket to the phone.
Seals
• Insert the contacts cover 1into
the connection socket.
• The camera lens and antenna
socket are protected by the lens
cap 2. Using the rubber
washer 3in its place does not
offer better protection (p. 58).
Additional information
Please switch off your phone before remov-
ing the battery!
Only 3V SIM cards are supported. Please
contact your service provider if you have an
older SIM card.

right page (9)of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Startup.fm
9Getting started
VAR Language: en; VAR issue date: 041104
Charge battery
Charging procedure
The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone, plug
power supply unit into a mains
power socket and charge for at least
two hours.
YDisplay during charging.
Charging time
An empty battery is fully charged
after about 2 hours. Charging is only
possible within a temperature range
of +5 °C to 45 °C. If the temperature
rises/falls 5 °C above/below this, the
charge symbol flashes a warning.
The mains voltage specified on the
power supply unit must not be
exceeded.
Operating times
The operating time depends upon
the respective conditions of use.
Extreme temperatures considerably
reduce the phone’s standby time.
Avoid placing the phone in the sun
or on a heater.
Talktime: 100 to 330 minutes
Standby time: 60 to 300 hours
Charge icon not visible
If the battery has been discharged
fully, the charge icon is not immedi-
ately visible when the power supply
is plugged in. It will appear after up
to two hours. In this case the battery
is fully charged after 3 to 4 hours.
Only use the plug-in power supply unit
included in delivery!
Display while in service
Charge level display during opera-
tion (empty-full):
VWX
A beep sounds when the battery is
nearly empty. The charge level of the
battery is only displayed correctly
after an uninterrupted charging/dis-
charging cycle. You should therefore
not remove the battery unnecessarily
and where possible not finish the
charging process prematurely.
Additional information
The power supply unit heats up when used
for long periods. This is normal and not
dangerous.
If the battery is removed for longer than
30 seconds, the clock must be reset.

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Startup.fm
left page (10)of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
Switching phone on and off/entering PIN10
VAR Language: en; VAR issue date: 041104
Switching phone on and off/entering PIN
Switching phone on/off
BHold key down.
Entering the PIN
The SIM card can be protected with a
4to8-digitPIN.
JEnter the PIN using the
number keys. The charac-
ters **** appear to
ensure nobody can read
your PIN on the display.
Correct with ].
CConfirm by pressing the
joystick. Logging on to
the network will take a
few seconds.
Emergency number
(SOS)
Only to be used in real emergencies!
By pressing the §SOS§ soft key you can
make an emergency call on any net-
work without a SIM card and without
entering a PIN (not available in all
countries).
Switching your phone on
for the first time
Time/date
Set the clock correctly on a one-off
basis when getting started.
CPress this key, then select
§Change§.
JFirst enter the date
(day/month/year), then
the time (24 hours,
including seconds).
CPress. The time and date
are updated.
Time zones
Set the time zone for your area.
ISelect the city in the
desired time zone from
the list ...
§Set§ ... and set it.
Copy SIM addresses
The first time the SIM card is
inserted, the entries on it can be cop-
ied to the Addressbook. Please do not
interrupt this procedure. During this
time, do not accept incoming calls. Fol-
low the instructions in the display.
You can also copy data from the SIM
card at a later time (p. 24).
Additional information
Change PIN.......................................p. 14
Clear SIM card barring ......................p. 15

right page (11) of M65 SUG X-Citeen,A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Startup.fm
11General instructions
VAR Language: en; VAR issue date: 041104
General instructions
Standby mode
The phone is in standby mode and is
ready for use when the name of the
service provider appears on the dis-
play.
BBy pressing and holding,
you can return to standby
mode from any situation.
Signal strength
ZStrong signal.
[A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
Digital Rights Mgmt.
(DRM)
Remember that your telephone has
Digital Rights Management. The use
of downloaded pictures, sounds or
applications can be restricted by the
suppliers, e.g., copy protection, use
for a limited period of time only,
number of times it can be used etc.
Main menu
The main menu is displayed graphi-
cally with symbols:
CCall up from standby
mode.
FISelect the application
symbols.
CStart an application.
Main menu options
§Options§ Open menu.
Different functions are available
depending on the context:
Big letters Select between two font
sizes.
Illumination Set display illumination to
brighter/darker.
Help Display a help text.

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Startup.fm
left page (12) of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
General instructions12
VAR Language: en; VAR issue date: 041104
User guide
Menu controls
The steps needed to reach a function
are shown in a condensed form in the
user guide, e.g. to display record of
missed calls in condensed form:
C¢P¢Calls missed
This comprises the following steps:
COpen main menu.
¢Select (highlight) Pby
moving the joystick
upwards, then press verti-
cally down on the joystick
before using the joystick
to highlight Calls missed.
CConfirm. The record is
opened.
Menu speed dialling
All menus are numbered so that a
function (such as writing a new SMS)
can be selected directly from
standby mode by entering a
number:
CPress to display the main
menu. Then press
5for Messages, then
1for Write message, then
1for SMS.
Symbols
The following symbols are used to
explain operation:
JEnter numbers/letters.
BOn/Off/End key
ACall key
<> Soft keys
§Menu§ Displays a soft-key func-
tion.
The joystick can be moved
in 5 directions.
CPress the joystick vertically,
e.g., to call up the menu.
D F E
HI G
Press the joystick in the
directions indicated.
=Function dependent on
service provider. Special
registration may be
required.

right page (13) of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Startup.fm
13Standard functions
VAR Language: en; VAR issue date: 041104
Standard functions
Option menus
List of functions repeatedly appear-
ing in options menus.
§Options§ Open menu.
Highlighting mode
Highlight one or more entries in
order to perform a function on
it/them.
§Options§ Open menu.
Mark Activate mode.
§Mark§ Highlight a non-highlighted
entry.
§Unmark§ Remove the highlighting
from a highlighted entry.
Additional highlighting functions:
Edit Open the entry to edit.
View Display entry.
Delete all Delete entry/delete all
entries after confirmation.
New entry Create new entry.
Send... Select transmission serv-
ice and medium for send-
ing or printing.
Reply/Reply
to all The sender becomes the
recipient, "Re:" is placed
in front of the subject mat-
ter and the received text is
transferred into the new
message.
Save Store entry.
Save to 9Save recipients in the cur-
rent address directory.
Sort Set sort criteria
(alphabetical order, type,
time).
Text input
(p. 16)
T9 preferred: Acti-
vate/deactivate T9 input.
Input language: Select
language for text.
Rename Rename selected entry.
Capacity Display memory capacity.
Attributes Display properties of the
highlighted object.
Help Display help text.
Mark all Highlight all entries.
Unmark all Delete highlighting on
all highlighted entries.
Delete marked All selected entries are
deleted.

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Startup.fm
left page (14) of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
Security14
VAR Language: en; VAR issue date: 041104
Security
The phone and SIM card are pro-
tected against misuse by several
security codes.
Codes
C¢T¢Security
¢Codes
¢Select function.
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not per-
mit deactivating the control.
§Select§ Press.
JEnter PIN.
CConfirm input.
§Change§ Press.
CConfirm.
Change PIN
You can change the PIN to any 4 to
8-digit number you find easier to
remember.
JEnter current PIN.
CPress.
J, CEnter new PIN.
J, CRepeat new PIN.
Keep these security codes in a safe
place where you can access them again
if required.
PIN Protects your SIM card
(Personal Identification
Number).
PIN2 This is needed to set the charge
detail display and to access
additional functions on special
SIM cards.
PUK
PUK2 Key code. Used to unlock SIM
cards after the wrong PIN has
been entered repeatedly.
Phone
code Protects your phone. Must be
entered at the first security set-
ting.

right page (15) of M65 SUG X-Citeen,A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Startup.fm
15Security
VAR Language: en; VAR issue date: 041104
C¢T¢Security
¢Codes
¢Select function.
Change PIN2
(Display only if PIN2 is available).
Proceed as for Change PIN.
Chg.phonecode
(Change phonecode)
You define the phone code (4 to
8 digits) when you call up a phone-
code protected function for the first
time (e.g. Direct call, p. 47). It is then
valid for all phone-code protected
functions.
Following the third unsuccessful
attempt, access to the phone code
and the functions that use it is
denied. If this occurs, contact the
Siemens Service (p. 56).
Clear SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred. Enter
the PUK (MASTER PIN) provided by
your service provider with the SIM
card in accordance with the instruc-
tions. If the PUK (MASTER PIN) has
been lost, please contact your serv-
ice provider.
Preventing accidental
activation
Even if PIN control is deactivated
(p. 14) confirmation is required to
switch on the phone.
This prevents accidental activation
of the phone, e.g. when you are car-
rying it in a bag or when you are trav-
elling in an aircraft.
BHold down.
CPress. The phone switches
on.
§Cancel§ Press this key or take no
action. The phone does
not switch on.

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Text.fm
left page (16)of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
Text entry16
VAR Language: en; VAR issue date: 041104
Text entry
Text entry without T9
Press number key repeatedly until
the required letter appears. Exam-
ple:
2Press once briefly to write
the letter a, twice to type
betc. Press and hold to
write the number.
]Press briefly to delete the
letter before the cursor.
Hold down to erase the
whole word.
FMove the cursor
(forwards/back).
#Press briefly: Swap
between abc, Abc, T9abc,
T9Abc, T9ABC, 123.
Hold down: All input-
variants are displayed.
*Press briefly: Special char-
acters are shown.
Hold down: Open input
menu.
0Press once/repeatedly:
. , ? ! ’ " 0 + - ( ) @ / : _
Hold down: Writes 0.
1Writes blank. Press twice =
line break.
Special characters
*Press briefly.
1) Line break
I, FNavigate to characters.
§Select§ Press.
Text entry menu
*Hold down:
Text format (SMS only),
Input language, Mark,
Copy/Insert
Text input with T9
"T9" uses individual key entries to
deduce the correct word.
#Activate/deactivate T9.
Select input language
§Options§ Open text menu.
Select Text input, then
select Input language.
§Select§ Confirm.
1)¿¡_;.,?!
+- "’ : */()
¤¥$£€@\ &#
[ ] { } %~<=>
|^` §Γ∆ΘΛΞ
ΠΣΦΨΩ

right page (17) of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:31)
©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Text.fm
17Text entry
VAR Language: en; VAR issue date: 041104
Write with T9
It is best if you finish a word without look-
ing at the display.
You simply press the keys where the
relevant letter is located once only.
1/EA blank space or moving
to the right ends the
word.
Do not input special characters such
as Ä. Use standard characters only,
e.g. A. T9 will do the rest.
T9 word suggestions
If several options are found in the
dictionary for a word, the most prob-
able is displayed first.
^Press. If this word is also
incorrect, press again.
^Keep pressing until the
correct word is displayed.
Add a new word to the dictionary:
§Spell§ Select and enter word
without T9. Then §Save§.
Correct a word
Words written with T9:
FMove left or right, word
by word, until the
required word is
§highlighted§.
^Scroll through the T9
word suggestions again.
]Deletes the last character
in a word anddisplays a
new possible word.
Text modules
C¢M¢Text modules
Text modules can be stored in the
phone for adding to your messages
(SMS, MMS, e-mail).
Additional information
0Set a full stop. The word is
concluded if it is followed by a
space.
#Press briefly: Switch
between: abc, Abc, T9abc,
T9Abc, 123.
Hold down: All input modes
are displayed.
*Hold down: Opens input
menu (p. 16).
T9® Text Input is licensed under one or more of
the following: U.S. Pat. Nos. 5,818,437,
5,953,541, 5,187,480, 5,945 928 and 6,011,554;
Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB; and
additional patents are pending worldwide.

©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Phone.fm
left page (18)of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:35)
Calling18
VAR Language: en; VAR issue date: 041104
Calling
JEnter the number (always
with area/international
dialling code).
]A short press clears the
last digit, a long press
clears the entire phone
number.
ADial phone number.
End call
BPress the End key briefly.
Set volume
IPress upwards/down-
wards in order to regulate
the volume.
Redial previous numbers
APress twice. The phone
number last called is redi-
alled.
Call up the redial list:
APress once.
IPick out a phone number,
then to dial press the …
A... key.
Auto. redial
§Auto dial§ The phone number is
dialled ten times at
increasing time intervals.
Reminder
§Prompt§ A beep reminds you to
redial the displayed
phone number after
15 minutes.
Accept call
APress.
Reject call
BPress briefly.
Additional information
Accept the call before bringing the tele-
phone to your ear in order to avoid ear
damage caused by the ringtones.
ÐStore phone number in the
Addressbook/Phonebook.
§Handsfr.§ Playback from loudspeaker
(handsfree talking).
Always switch off "handsfree
talking" before holding the
phone to your ear! Otherwise,
you will damage your hearing!
*Press and hold to switch
microphone off.
International dialling codes
0Press and hold until a "+"- is
displayed.
§Country§ Select country.

right page (19) of M65 SUG X-Cite en, A31008-H7150-A1-4-7619 (09.08.2005, 15:35)
©
Siemens AG 2003, C:\Siemens\DTP-Satz\Produkte\SAR_Update_050805\m65_retail\en\M65K_Phone.fm
19Calling
VAR Language: en; VAR issue date: 041104
Call options
§Options§ Functions which are only
available during the call
are offered.
Swapping between
two calls
Establish a second connection
§Options§ Open menu.
Hold Hold current call, then
dial the new phone
number.
§Options§ Open menu.
Swap Swap between calls.
Incoming calls during a call
You will hear a "call waiting tone"
and you can now:
• Accept the waiting call in addition to
the first
§Swap§ Accept the call and put
the current call on hold.
• Reject the waiting call
§Reject§ Reject the call, or via
§Divert§ divert it to the mail-
box.
• Accept the waiting call and end the
current call
BEnd call.
CAccept new call.
End call(s)
BPress the End key.
§Yes§ Resume held call.
§No§ End all calls.
Conference
You call up to 5 conference partici-
pants one after the other. Once you
have established a connection:
§Options§ Open menu and select
Hold. The current call is
put on hold.
JNow dial a new number.
When the new connec-
tion is established ...
§Options§ ... open menu and select
Conference. Repeat until
all participants are con-
nected.
End
BAll calls in the multiparty
conversation are ended
when the End key is
pressed.
Tone sequences (DTMF)
Enter tone sequences (digits) for
remote inquiries to an answering
machine.
§Options§ Open menu and select
Send DTMF.