Siemens DCAMRC User manual

806857A02
s
Drawout Assembly
Ensamble de zócalo extraíble
Kit de montage pour socle, débrochage
1 / 11
Installation Instructions / Instructivo de Instalación
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplyingthis deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplyingthis deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
I.L. No. 806857A02
DCXM_ 3VL9600-4WS_1
DCXN_ 3VL9700-4WS_1
U.S. Cat. No. Euro Order No.
Item: DCAMRC_ 3VL9600-4WA_1
DCAMFC_ 3VL9600-4WC_1
DCANRC_ 3VL9700-4WA_1
DCANFC_ 3VL9700-4WC_1
U.S. Cat. No. Euro Order No.
For Use With Frame MG, NG
Para Usar Con Caja Base MG, NG
6mm
Cal.ISO 6789
NOT suitable for use with 100% rated circuit breakers.
[ NO para uso con interruptores a 100% intensidad continua. ]
k
lg
bcd
cba
24X 5/16-18 X 1.25”
DCAMFC3 / 3VL9600-4WC31
m
6X
12X M8 X 35 mm
r
s8X M6 X 6mm
6X
DCANFC3 / 3VL9700-4WC31
h
e
n
j
12X M8 X 35 mm
24X 5/16-18 X 1.25”
8X M6 X 6mm
k
Silver
Plata
NOTE - These instructions do not purport to cover all details or variations in equipment, or to provide for every possible
contingency to be met in connection with installation, operation or maintenance. Should further information be desired or
should particular problems arise, which are not covered sufficiently for the purchaser’s purposes, the matter should be
referred to the local Siemens sales office. The contents of this instruction manual shall not become part of or modify any
prior or existing agreement, commitment or relationship. The sales contract contains the entire obligation of Siemens. The
warranty contained in the contract between the parties is the sole warranty of Siemens. Any statements contained herein
do not create new warranties or modify the existing warranty.
Trademarks - Unless otherwise noted, all names identified by ® are registered trademarks of Siemens AG or Siemens
Industry, Inc. The remaining trademarks in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.

806857A02
2 / 11
DCAMRC3 / 3VL9600-4WA31
6X
p
k
lg
r
s
m
bcd
cba
12X M8 X 35 mm 24X 5/16-18 X 1.25”
8X M6 X 6mm
DCANRC3 / 3VL9700-4WA31
Silver
Plata
24X 5/16-18 X 1.25”
k
6X
p
r
s
n
e
12X M8 X 35 mm
h
j
8X M6 X 6mm
Silver
Plata
s
r
DCAMFC4 / 3VL9600-4WC41
16X M8 X 35mm 32X 5/16-18 UNC X 1.25”
k
m
8X
8X M6 X 6mm
b
b
a
d
d
c
c
a
g
f
r
s
16X M8 X 1.25 X 35 mm
32X 5/16-18 UNC X 1.25”
8X
j
h
e8X
8X M6 X 6mm
DCANFC4 / 3VL9700-4WC41
n
k
DCXM3 / 3VL9600-4WS31
12X M8 X 35 mm
l
g
r
sbc
D
c
ba
m8X M6 X 6mm
DCXM4 / 3VL9600-4WS41
12X M8 X 35 mm
r
s
bcD
c
ba
m
8X M6 X 6mm
g
f

2
1
MG NG
2
1
Trip
[ Interrumpir ]
Trip
[ Interrumpir ]
rs
s
r
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplyingthis deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplyingthis deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
3 / 11 806857A02
Silver
Plata
DCAMRC4 / 3VL9600-4WA41
fg
r
s
m
8 X M6 X 6mm
16X M8 X 1.25 X 35 mm
32X 5/16-18 UNC X 1.25”
cba
a
d
d
bc
k
p
8X
32X 5/16-18 UNC X 1.25”
16X M8 X 1.25 X 35 mm
DCANRC4 / 3VL9700-4WA41
p
8X
r
s
k
j
h
e8X
8X M6 X 6mm
Silver
Plata
DCXN4 / 3VL9700-4WS41
16X M8 X 35 mm
n
r
s
h
j
8X M6 X 6mm
e
DCXN3 / 3VL9700-4WS31
12X M8 X 35 mm
e
n
r
s
h
j
8X M6 X 6mm

4 / 11
5
Test:
[ Prueba: ]
NG
MG
5
4
33
1
3
2
ON / I
OFF / O
ON / I
Test:
[ Prueba: ]
3
21
ON / I
OFF / O
ON / I
4
806857A02
clic
clic
5
4
Trip
[ Interrumpir ]
OK
5
4
Trip
[ Interrumpir ]
OK

Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplyingthis deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplyingthis deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
5 / 11
77
88
NG
6
6
MG
1
2
bc
d
cba
212 lb. in.
[ 24 Nm ]
6 mm
12X M8 X 35 mm
16X M8 X 35 mm
806857A02
1
2
e
6X- 3 Pole [ Polos ]
8X- 4 Pole [ Polos ]
212 lb. in.
[ 24 Nm ]
6 mm
12X M8 X 35 mm
16X M8 X 35 mm
a b cd
lgfg
c Db
b ac d c bae e ee
e ee
eee eeee
hjhj

6 / 11
10
99
11
4X 11 lb.in.
[ 1.2 Nm ]
806857A02
1
2
2
4X 11 lb.In
[ 1.2 Nm ]
1
2
1
2
11
8X 18 lb.in
[ 2.0 Nm ]
m
8X M6 X 6mm
8X 18 lb.in
[ 2.0 Nm ]
n
8X M6 X 6mm
MG NG
10
2
j
1
h
2
1
F
L3 Pole [ Polos ]
4 Pole [ Polos ]

7 / 11
MG / NG 13
15
16
12
806857A02
14
Option :
[ Opción : ]
1-3X
27 lb.in.
[ 3 Nm ] 16X
1
OFF / 0
2
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace all covers before power supplying this device is
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
k
2
1

8 / 11
17
Test:
[ Prueba: ]
18 18a
DCAMFC3 / 3VL9600-4WC31
DCANFC3 / 3VL9700-4WC31
DCAMFC4 / 3VL9600-4WC41
DCANFC4 / 3VL9700-4WC41
Ø.51
[ Ø 13 mm ]
Silver
Plata
f
212 lb.in.
[ 24 Nm ]
1/4 “
1
OFF / O
806857A02
ON / I
2
Trip
[ Interrumpir ]
3
5
4≤6X
DCAMRC3 / 3VL9600-4WA31
DCANRC3 / 3VL9700-4WA31
DCAMRC4 / 3VL9600-4WA41
DCANRC4 / 3VL9700-4WA41
3 Pole [ Polos]
24X 5/16-18 X 1.25”
4 Pole [ Polos]
32X 5/16-18 X 1.25”
Silver
Plata
Ø.51
[ Ø 13 mm ]
p
212 lb.in.
[ 24 Nm ]
3 Pole [ Polos]
24X 5/16-18 X 1.25”
4 Pole [ Polos]
32X 5/16-18 X 1.25”
1/4 “

9 / 11
MG NG
CU
S
MO
U
SU
R
329.5
410
365.5
378.5
1-3
298
12.56” [ 378.5 ]
12.97” [ 329.5
]
16.14” [ 410 ]
Customer Mounting
Surfaces
[ Superficies de
Montaje del Cliente ]
.04 -
.12”
[ 1-3 ]
14.39” [ 365.5 ]
11.73” [ 298 ]
806857A02
General information:
[ Información General: ]
1.42”
[ 36 ]
14.82” [ 376.5 ]
12.56” [ 319 ]
Customer Panel
[ Panel del Cliente ]
Customer Mounting
Surfaces
[ Superficies de
Montaje del Cliente ]
13.15” [ 334 ]
13.58” [ 345 ]
11.32” [ 287.5 ]
Cover Frame
[ Marco de la Cubierta ]
.12”
[ 3 ]
.04 -.12”
[ 1-3 ]
3.43” [ 87 ] 3.43” [ 87 ]
Customer Panel
[ Panel del Cliente ]
Cover Frame
[ Marco de la Cubierta ]
100
409.5
1.42” [ 36 ]
18.74” [ 476 ]
12.56” [ 319 ] Customer Mounting
Surfaces
[ Superficies de
Montaje del Cliente ]
17.50” [ 444.5 ]
16.22” [ 409.5 ]
.51”
[ Ø13 ]
.04 -.12”
[ 1-3 ]
3.43”
[ 87 ] 3.43”
[ 87 ]
>.12”
[ >3 ]
11.32” [ 287.5 ]
>.12”
[ >3 ]
10.69” [ 271.5 ]
11.89” [ 302 ]
3.94”
[ 100 ] 2.50” [ 63.5 ]
6.38” [ 162 ]
2.44”
[ 62 ]
2.50” [ 63.5 ]
CUSTOMER
MOUNTING
SURFACE
518
508
329.5
486.5
476.5
298 62
440.5
264.5
10.41”
[ 264.5 ]
19.15” [ 486.5 ]
12.97” [ 329.5
]
20.00” [ 508 ]
Customer Mounting
Surfaces
[ Superficies de
Montaje del Cliente
]
.12 -
.20”
[ 3-5 ]
17.34” [ 440.5 ]
11.73” [ 298 ]
20.39” [ 518 ]
Ø.53”
[ Ø13.5 ]
18.76” [ 476.5 ]
.12 -
.20”
[ 3-5 ]
2.44”
[ 62 ]
6.63” [ 168.5 ]
2.50”
[ 63.5
]
2.50”
[ 63.5
]
11.89” [ 302 ]
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplyingthis deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplyingthis deviceis
turned on.
Couper l'alimentation de l'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoir soit alimenté.
Tensión peligrosa.
Puede causar la muerte o lesiones graves. Tension dangereuse. Danger de mort ou risque de blessures graves.
Hazardous Voltage.
Will cause death or serious injury.
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.

10 / 11
NG
0
.25”
[ 6.3 ]
D
11.67”
[ 296.5 ]
11.40”
[ 289.5 ]
C
6.30”
[ 160 ]
6.54”
[ 166 ]
B
5.85”
[ 148.5 ]
6.12”
[ 155.5 ]
A
NG
MGDIM.
OKOK
806857A02
Mounting information
[ Montaje información ] 3 Poles & 4 Poles
[ 3 Polos & 4 Polos ]
557
Ø13
"C"
373 4P (297 3P)
395.5 4P (319.5 3P)
"B"
"A"
12.58”(3P) 15.57”(4P)[ 319.5 (3P) 395.5 (4P) ]
.79”
[ 20 ]
2.36” [ 60 ]
11.69” (3P) 14.69” (4P)
[ 297 (3P) 373 (4P) ]
Ø.51”
[ Ø13 ]
.79”
[ 20 ]
1.57”
[ 40 ]
1.57”
[ 40 ]
1.18” [ 30 ]
21.93”
[ 557 ]
2.99”(4P)
[ 76 (4P)] 2.99”
[ 76 ] 2.99” [ 76 ]
MG
33
348.5
287.5
451.5
CUSTOMER
MOUNTING
SURFACES
>3
271.5 242.5
514
420
87
380
319
>3
87 36
16
CUSTOMER
PANEL
COV ER
FRAME
1.42”
[ 36 ]
17.78” [ 451.5 ]
14.96” [ 380 ]
12.56” [ 319 ]
3.43”
[ 87 ] 3.43”
[ 87 ]
Customer Panel
[ Panel del Cliente ]
Customer Mounting
Surfaces
[ Superficies de
Montaje del Cliente ]
13.72” [ 348.5 ]
16.54” [ 420 ]
11.32” [ 287.5 ]
10.69” [ 271.5 ]
20.24” [ 514 ]
9.55” [ 242.5 ]
Cover Frame
[ Marco de la Cubierta ]
.63” [ 16 ] 1.30” [ 33 ]
>.12” [ >3 ]
>.12”
[ >3 ]
.04 -.12”
[ 1-3 ]
1.30” [ 33 ]
18.68” [ 474.5 ]
12.97” [ 329.5 ]
9.82” [ 249.5 ]
.30”
[ 7.5 ]
6.26” [ 413 ]
21.22” [ 513.5 ]
>.12” [ >3 ] Customer Mounting
Surfaces
[ Superficies de
Montaje del Cliente ]
>.12”
[ >3 ]
10.41” [ 264.5 ]
.04 -.12”
[ 1-3 ]
15.02” [ 381.5 ]
14.39” [ 365.5 ]
11.73” [ 298 ]
.63” [ 16 ]