Siemens SIMATIC NET CP 5613 A2 User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

_
_________________
_
 
CP 5613 A2 / CP 5614 A2
_
_________________
_
_
_______________
_
__
_
_________________
_
_
_________________
_
_
_________________
_
_
_________________
_
1
Preface
2
Description of the device
3
Software installation
SIMATIC NET
4
Hardware installation
PG/PC - PROFIBUS
5
CP 5613 A2 / CP 5614 A2 Configuration
6
Technical specifications
Operating Instructions A
Certification
12/2012
C79000-G8976-C301-02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Siemens AG
Industry Sector
Postfach 48 48
90026 NÜRNBERG
GERMANY
Order number: C79000-G8976-C301
Ⓟ 12/2012 Technical data subject to change
Copyright © Siemens AG 2012.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of contents
1 Preface ...................................................................................................................................................... 5
1.1 Components of the product............................................................................................................5
2 Description of the device ........................................................................................................................... 9
2.1 CP 5613 A2 product characteristics ..............................................................................................9
2.2 CP 5614 A2 product characteristics ............................................................................................10
2.3 PROFIBUS interface....................................................................................................................11
2.4 Meaning of the LED display.........................................................................................................12
3 Software installation................................................................................................................................. 15
3.1 Installing the driver.......................................................................................................................15
3.2 Uninstalling the driver ..................................................................................................................15
3.3 Installing the SIMATIC NET PC software ....................................................................................16
3.4 Uninstalling the SIMATIC NET PC software................................................................................16
3.5 Alternative software packets........................................................................................................17
4 Hardware installation ............................................................................................................................... 19
4.1 Safety notices...............................................................................................................................19
4.2 Installing hardware.......................................................................................................................20
4.2.1 Automatic adaptation of the bus clock speed ..............................................................................20
4.2.2 Installing hardware_PCI...............................................................................................................20
4.3 Hardware compatibility.................................................................................................................21
4.3.1 Compatibility with other CPs........................................................................................................21
4.3.2 Replacement................................................................................................................................21
5 Configuration ........................................................................................................................................... 23
6 Technical specifications........................................................................................................................... 25
A Certification.............................................................................................................................................. 29
Index........................................................................................................................................................ 31
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of contents
CP 5613 A2 / CP 5614 A2
4 Operating Instructions, 12/2012, C79000-G8976-C301-02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface 1
1.1 Components of the product
What the consignment contains
The following components are supplied with the CP 5613 A2 / CP 5614 A2:
● CP 5613 A2 / CP 5614 A2 communications processor
● SIMATIC NET CD
● Certificate of license
Please check that the consignment you have received is complete. If the consignment is
incomplete, contact your supplier or your local Siemens office.
Validity of this documentation
These operating instructions are valid for the following products:
● CP 5613 A2
order number: 6GK1 561-3AA01
● CP 5614 A2
order number: 6GK1 561-4AA01
Content of this documentation
These operating instructions contain information about the installation and configuration of
the CP 5613 A2 and CP 5614 A2 communications processors.
Updated operating instructions on the Internet
You will find the current version of these operating instructions on the Product Support pages
under the following entry ID: 62612014
(http://support.automation.siemens.com/WW/view/en/62612014)
Further documentation
The documents listed below contain more detailed information on commissioning and using
the communications processor. You will find this documentation on the Product Support
pages on the Internet under the following entry link:
Support (http://support.automation.siemens.com/WW/view/en)
Enter the entry ID shown below of the relevant manual as the search item.
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface
1.1 Components of the product
CP 5613 A2 / CP 5614 A2
6 Operating Instructions, 12/2012, C79000-G8976-C301-02
● Configuration manual Commissioning PC Stations
This provides you with detailed information on commissioning and configuring SIMATIC
NET PC communications modules.
Entry ID:
13542666 (http://support.automation.siemens.com/WW/view/en/13542666)
● System manual SIMATIC NET Industrial Communication with PG/PC
– Volume 1– Basics
Entry ID:
42783968 (http://support.automation.siemens.com/WW/view/en/42783968)
– Volume 2– Interfaces
Entry ID:
42783660 (http://support.automation.siemens.com/WW/view/en/42783660)
The system manuals introduce the topic of industrial communication and explain the
communications protocols used. There is also a description of the OPC interface as
user programming interface.
● Installation manual SIMATIC NET PC Software
This document contains detailed information on installing the SIMATIC NET
PC software.
Entry ID:
42784913 (http://support.automation.siemens.com/WW/view/en/42784913)
● System manual PROFIBUS Network Manual
In this document you will find detailed information about setting up a PROFIBUS network.
Entry ID:
35222591 (http://support.automation.siemens.com/WW/view/en/35222591)
SIMATIC NET documentation
You will find the entire SIMATIC NET documentation on the pages of Product Support:
10805878 (http://support.automation.siemens.com/WW/view/en/10805878)
Go to the required product group and make the following settings:
→ Entry list → Entry type "Manuals / Operating Instructions"
Service & Support
In addition to the product documentation, the comprehensive online information platform of
Siemens Automation Customer Support supports at any time and at any location in the
world. You will find the Service & Support pages on the Internet at the following address:
(http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang=
en)
Apart from news, you will also find the following information there:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface
1.1 Components of the product
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02 7
● Product information, Product Support, Applications & Tools
● Technical Forum
● Technical Support - Ask the Siemens experts
● Our service offer:
– Technical Consulting, Engineering support
– Field Service
– Spare parts and repairs
– Maintenance, optimization, modernization and more
You will find contact data on the Internet at the following address:
(http://www.automation.siemens.com/partner/guiwelcome.asp?lang=en)
See also
(https://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo&lang=en&objid=38
718979&caller=view)
SITRAIN - Siemens training for automation and industrial solutions
With over 300 different courses, SITRAIN covers the entire Siemens product and system
spectrum in the field of automation and drive technology. Apart from the classic range of
courses, we also offer training tailored for individual needs and a combination of different
teaching media and sequences, for example self-learning programs on CD-ROM or on the
Internet.
You will find detailed information on the training curriculum and how to contact our customer
consultants at the following Internet address:
(www.siemens.com/sitrain)
SIMATIC NET glossary
Explanations of the specialist terms used in this documentation can be found in the SIMATIC
NET glossary.
You will find the SIMATIC NET glossary here:
● SIMATIC NET Manual Collection
The DVD ships with certain SIMATIC NET products.
● On the Internet under the following entry ID:
50305045 (http://support.automation.siemens.com/WW/view/en/50305045)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface
1.1 Components of the product
CP 5613 A2 / CP 5614 A2
8 Operating Instructions, 12/2012, C79000-G8976-C301-02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Description of the device 2
2.1 CP 5613 A2 product characteristics
CP 5613 A2 characteristics
The CP 5613 A2 is a communications processor for connecting PCs to PROFIBUS. The
essential characteristics are as follows:
● The CP 5613 A2 is equipped with a PROFIBUS interface allowing up to 12 Mbps. It is
intended for operation in PGs and PCs with a PCI bus interface according to the PCI
standard V2.2.
● With the CP 5613 A2, up to 32 devices (PC, PG, SIMATIC S7 or ET 200) can be linked to
form a network segment. By linking several segments with repeaters, a maximum of 64
nodes can be connected.
● Optimized for fast DP master operation (DP Base) with up to 124 DP slaves with full data
consistency
● As an alternative, can also be used as a DP slave
● Relieves the PC due to event mechanisms (automatic detection of data changes)
● Fast logic support regardless of the user program (automatic linking of input and output
data can be set by the user program).
● Plug and play support during installation of the hardware
● Support of all data transmission speeds from 9.6 kbps to 12 Mbps
● Floating RS-485 connector
● Support of PCI 3.3 V/5 V, 33 MHz/66 MHz, 32 bit/64 bit and PCI-X 66 MHz, 32 bit/64 bit
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02 9
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Description of the device
2.2 CP 5614 A2 product characteristics
CP 5613 A2 / CP 5614 A2
10 Operating Instructions, 12/2012, C79000-G8976-C301-02
CP 5613 A2 appearance
The following figure shows the CP 5613 A2 communications processor:
$
%
&3
$
3%
A Yellow and green status LED
B PROFIBUS interface 1 (master or slave)
2.2 CP 5614 A2 product characteristics
CP 5614 A2 characteristics
The CP 5614 A2 is a communications processor for connecting PCs to PROFIBUS. It has
the same characteristics as the CP 5613 A2, as well as:
● Second RS-485 connector for additional connection of the CP as a DP slave to a second
DP network.
● Program-controlled transfer of data between master and slave module to allow for setting
up of hierarchical PROFIBUS networks.
● DP master and DP slave can be operated at the same time.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Description of the device
2.3 PROFIBUS interface
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02 11
CP 5614 A2 appearance
The following figure shows the CP 5614 A2 communications processor:
$
%
&
&3
$
3%
3%
A Yellow and green status LED
B PROFIBUS interface 1 (master)
C PROFIBUS interface 2 (slave)
2.3 PROFIBUS interface
PROFIBUS network
The physical link between the PROFIBUS interface and the PROFIBUS network is via a
floating RS-485 interface that is part of the module. Depending on the network configuration,
data rates of 9.6 Kbps up to a maximum of 12 Mbps are possible in the PROFIBUS network.
Note
You will find information about the structure of a PROFIBUS network in the system manual
"PROFIBUS Network Manual". The document is part of the Manual Collection. You will also
find this on the Product Support pages under the following entry ID:
35222591 (http://support.automation.siemens.com/WW/view/en/35222591)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Description of the device
2.4 Meaning of the LED display
CP 5613 A2 / CP 5614 A2
12 Operating Instructions, 12/2012, C79000-G8976-C301-02
PIN assignment
The D-sub female connector has the following pin assignment:
54321
9876
PIN Short name Meaning Input/output
1 NC Socket pin 1 is not connected. -
2 NC (M24) Socket pin 2 is not connected. With other MPI/DP components,
the return line of the floating 24 V power supply may be via this
pin.
-
3 LTG_B Signal line B of the PROFIBUS connector. Input/output
4 RTSAS RTSAS, input signal for direct MPI link. The control signal is "1"
active when the automation system connected over a special
MPI cable is sending.
Input
5 M5EXT M5EXT return line (GND) of the 5 V power supply. The current
load of an external consumer connected between P5EXT and
M5EXT must not exceed a maximum of 90 mA.
Output
6 P5EXT P5EXT supply (+5 V) of the 5 V power supply. The current load
of an external consumer connected between P5EXT and
M5EXT must not exceed a maximum of 90 mA (short-circuit
proof).
Output
7 NC (P24V) Socket pin 7 is not connected. With other MPI/DP components,
the P24V supply of the floating 24 V power supply may be via
this pin.
-
8 LTG_A Signal line A of the PROFIBUS connector. Input/output
9 RTS RTS output signal of the CP module. The control signal is "1"
active when the device (PG or PC) is sending.
Output
Shield The shield is connected to components of the connector
housing.
2.4 Meaning of the LED display
LED display
The meaning of the LED display is as follows:
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Description of the device
2.4 Meaning of the LED display
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02 13
Green and yellow LED Function
green lit DP master: Shows the token rotation (in other
words, normal operation).
green off DP master: Incorrect bus parameters, defective
bus or CP not in operation
green flashing at one second intervals DP master: Bad database
green and yellow flashing alternately Module is being addressed by diagnostics tool to
check installation.
yellow lit DP slave: Shows polling by the higher-level DP
master: (in other words, normal operation).
yellow off DP slave: DP slave connector is not addressed.
red flashing fast Module not started (normal status following
reset).
green and yellow flashing synchronized Exception status (error in firmware)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Description of the device
2.4 Meaning of the LED display
CP 5613 A2 / CP 5614 A2
14 Operating Instructions, 12/2012, C79000-G8976-C301-02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

3
Software installation
3.1 Installing the driver
installation of the CP 5613 A2 / CP 5614 A2 driver
The driver is installed automatically when you install the "SIMATIC NET, PC Software,
Edition 11/2003" (or higher) or the Developer Kit (version 3.1).
Note
For the STEP 7 version approved for the communications processor, refer to the readme file
of STEP 7.
3.2 Uninstalling the driver
Uninstalling after using the communications processor (with SIMATIC NET PC software)
NOTICE
Uninstalling the driver
The procedure recommended here deletes the entire SIMATIC NET PC software on the PC
not only the driver for the communications processor.
● Initial situation: The "SIMATIC NET PC Software" DVD is installed on the computer.
● Uninstall the SIMATIC NET PC software as described in the Installation Instructions of
the "SIMATIC NET, PC Software" DVD.
Uninstalling the CP 5613 A2 / CP 5614 A2 driver
The driver is uninstalled automatically when you uninstall
the "SIMATIC NET, PC Software" DVD.
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02 15
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Software installation
3.3 Installing the SIMATIC NET PC software
CP 5613 A2 / CP 5614 A2
16 Operating Instructions, 12/2012, C79000-G8976-C301-02
3.3 Installing the SIMATIC NET PC software
SIMATIC NET PC software
The SIMATIC NET PC software is one of several software packages with which you can
operate the CP in your PG/PC. You will find information on alternatives in the section
"Alternative software packets (Page 17)".
To configure the CP, you require additional configuration software. You will find information
on the configuration software in the section "Configuration (Page 23)".
Condition
The plug and play function is activated in the BIOS of your PG/PC.
Prior to hardware installation
Install the software as described in the installation manual "SIMATIC NET PC Software".
You will find this installation manual on the Product Support pages under the entry ID:
Auto-Hotspot (http://support.automation.siemens.com/WW/view/en/61630923)
You should also note the current information on the SIMATIC NET PC software on the
Product Support pages:
Support (http://support.automation.siemens.com/WW/view/en/10805995/133400)
After the hardware installation
After installing the CP, your PG/PC automatically searches for a suitable driver.
1. Follow the instructions of the Hardware Wizard of Windows.
2. Do not activate the search for drivers on the Internet.
3.4 Uninstalling the SIMATIC NET PC software
Condition
The SIMATIC NET PC software is installed on the PG/PC.
Procedure
Note
The procedure recommended here deletes the entire SIMATIC NET PC software on the
PG/PC not only the driver for the communications processor.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Software installation
3.5 Alternative software packets
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02 17
Uninstall the entire software package as described and recommended in the installation
manual "SIMATIC NET PC Software".
You will find the installation manual on the SIMATIC NET DVD or on the Product Support
pages under the following entry ID:
61630923 (http://support.automation.siemens.com/WW/view/en/61630923)
3.5 Alternative software packets
Alternatives to SIMATIC NET PC software
To operate the CP, alternative software packages such as STEP 7 V5.5 or STEP 7
Professional V11 are also available. You will find current information on this on the Product
Support pages under the following entry ID:
47071380 (http://support.automation.siemens.com/WW/view/en/47071380)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Software installation
3.5 Alternative software packets
CP 5613 A2 / CP 5614 A2
18 Operating Instructions, 12/2012, C79000-G8976-C301-02
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

4
Hardware installation
4.1 Safety notices
WARNING
Electric shock possible - work only when the power supply is off
Opening the PG/PC and plugging or pulling the communications processor is permitted
only when the power is off.
Turn off your PG/PC and pull the power cable connector before you start the hardware
installation.
NOTICE
Note the EC directives
Components can be damaged or destroyed by electrostatic discharge. When installing,
keep to the rules for electrostatically sensitive devices (ESD).
•Pick up components and modules only by their edges. Do not touch the pins or
conductors.
•Before opening the PG/PC, make sure that you discharge any electrostatic charge from
your body. You can do this by touching metal parts on the back panel of the PG/PC
pulling the power plug.
•Make sure that you also discharge any electrostatic charge from tools you intend to use
for the work on the PG/PC.
•Do not operate the PG/PC with the housing open.
NOTICE
Firm mounting
The CP must sit firmly and uniformly in the slot. Check that the module sits firmly in the slot
as described in the manual accompanying your PG/PC.
Note
Oblique installation position is permitted
Some PG/PC designs require oblique installation of the CP. This is permitted.
CP 5613 A2 / CP 5614 A2
Operating Instructions, 12/2012, C79000-G8976-C301-02 19
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com