Siemens SIMATIC NET RX1500 User manual

Edition 07/2021
Catalog
SIMATIC NET
Networking Components
RUGGEDCOM Modules
For RX1500, RX1501, RX1510, RX1511, RX1512, RX1524, RX1536
https://www.siemens.com

SIMATIC NET
Networking Components
RUGGEDCOM Modules
Catalog
For RX1500, RX1501, RX1510, RX1511, RX1512,
RX1524, RX1536
Preface
Introduction 1
Power Supply Modules 2
Copper Ethernet Modules 3
Fiber Optic Ethernet
Modules 4
WAN Modules 5
Cellular Modem Modules 6
RUGGEDCOM APE Modules 7
Blank Modules 8
07/2021
C79000-G8976-1320-16

Legal Information
Warning Notice System
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety
alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown
below are graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger
will be used. A notice warning of injury to persons with a safety alert symbol may also include a warning
relating to property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the
specific task in accordance with the relevant documentation, in particular its warning notices and safety
instructions. Qualified personnel are those who, based on their training and experience, are capable of
identifying risks and avoiding potential hazards when working with these products/systems.
Proper Use of Siemens Products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant
technical documentation. If products and components from other manufacturers are used, these must be
recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning,
operation and maintenance are required to ensure that the products operate safely and without any
problems. The permissible ambient conditions must be complied with. The information in the relevant
documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this
publication may be trademarks whose use by third parties for their own purposes could violate the rights of
the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.
Siemens AG
Digital Industry
Process Automation
Postfach 48 48
90026 NÜRNBERG
GERMANY
© 07/2021 Subject to Change Copyright © Siemens 2021
All rights reserved

Table of Contents
Preface .......................................................................................................................................... vii
Related Documents ................................................................................................................ vii
Accessing Documentation ...................................................................................................... vii
Registered Trademarks ........................................................................................................... vii
Warranty ............................................................................................................................... viii
Training ................................................................................................................................ viii
Customer Support ................................................................................................................. viii
Contacting Siemens ................................................................................................................ ix
Ordering RUGGEDCOM Products ............................................................................................. ix
1 Introduction ........................................................................................................................... 1
1.1 Available Modules ................................................................................................. 2
1.2 Supported Modules by Device ............................................................................. 15
1.3 Installing/Removing Modules ............................................................................... 18
1.4 Dimensions ......................................................................................................... 19
2 Power Supply Modules ........................................................................................................ 21
2.1 RUGGEDCOM RX1500PN PS 12 ............................................................................ 22
2.2 RUGGEDCOM RX1500PN PS 12P .......................................................................... 24
2.3 RUGGEDCOM RX1500PN PS 24 ............................................................................ 26
2.4 RUGGEDCOM RX1500PN PS 24P .......................................................................... 28
2.5 RUGGEDCOM RX1500PN PS 48 ............................................................................ 30
2.6 RUGGEDCOM RX1500PN PS 48P .......................................................................... 32
2.7 RUGGEDCOM RX1500PN PS HI ............................................................................ 34
2.8 RUGGEDCOM RX1500PN PS HIP ........................................................................... 36
3 Copper Ethernet Modules ................................................................................................... 39
3.1 RUGGEDCOM RX1500PN LM CG01 ...................................................................... 40
3.2 RUGGEDCOM RX1500PN M12 CG03 .................................................................... 43
3.3 RUGGEDCOM RX1500PN M12 CG03B .................................................................. 46
3.4 RUGGEDCOM RX1500PN M12 X CG04 ................................................................. 49
3.5 RUGGEDCOM RX1500PN M12 X CG04B ............................................................... 52
3.6 RUGGEDCOM RX1500PN M12 4TX03 ................................................................... 55
3.7 RUGGEDCOM RX1500PN M12 4TX03B ................................................................. 58
3.8 RUGGEDCOM RX1500PN M12 4TX04 ................................................................... 61
3.9 RUGGEDCOM RX1500PN M12 4TX04B ................................................................. 63
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16 iii

Table of Contents
3.10 RUGGEDCOM RX1500PN LM 6TX01 ..................................................................... 65
4 Fiber Optic Ethernet Modules ............................................................................................. 69
4.1 RUGGEDCOM RX1500PN LM 4FX11 ..................................................................... 70
4.2 RUGGEDCOM RX1500PN LM FL01 ....................................................................... 72
4.3 RUGGEDCOM RX1500PN LM FG03 ....................................................................... 74
4.4 RUGGEDCOM RX1500PN LM FG50 ....................................................................... 76
4.5 RUGGEDCOM RX1500PN LM FG51 ....................................................................... 78
4.6 RUGGEDCOM RX1500PN LM FX50 ....................................................................... 80
4.7 RUGGEDCOM RX1500PN LM FX51 ....................................................................... 82
4.8 RUGGEDCOM RX1500PN LM 6FX50 ..................................................................... 84
4.9 RUGGEDCOM RX1500PN LM 6FX51 ..................................................................... 86
5 WAN Modules ...................................................................................................................... 89
5.1 RUGGEDCOM RX1500PN LM S01 ......................................................................... 90
5.2 RUGGEDCOM RX1500PN LM TC1 ......................................................................... 94
5.3 RUGGEDCOM RX1500PN LM TC2 ......................................................................... 97
5.4 RUGGEDCOM RX1500PN LM TC4 ....................................................................... 100
5.5 RUGGEDCOM RX1500PN LM E02 ....................................................................... 103
5.6 RUGGEDCOM RX1500PN LM D02 ...................................................................... 105
6 Cellular Modem Modules .................................................................................................. 109
6.1 RUGGEDCOM RX1500PN LM W11 ...................................................................... 110
6.2 RUGGEDCOM RX1500PN LM W12 ...................................................................... 117
6.3 RUGGEDCOM RX1500PN LM W21 ...................................................................... 124
6.4 RUGGEDCOM RX1500PN LM W22 ...................................................................... 132
6.5 RUGGEDCOM RX1500PN LM W32 ...................................................................... 140
6.6 RUGGEDCOM RX1500PN LM W41 ...................................................................... 148
6.7 RUGGEDCOM RX1500PN LM W51 ...................................................................... 156
6.8 RUGGEDCOM RX1500PN LM W61 ...................................................................... 167
6.9 RUGGEDCOM RX1500PN LM W81 ...................................................................... 176
7 RUGGEDCOM APE Modules ............................................................................................... 185
7.1 RUGGEDCOM RX1500PN LM APE1402 (Obsolete) .............................................. 186
7.2 RUGGEDCOM RX1500PN LM APE1402W7 (Obsolete) ......................................... 189
7.3 RUGGEDCOM RX1500PN LM APE1404 (Obsolete) .............................................. 192
7.4 RUGGEDCOM RX1500PN LM APE1404 ADM (Obsolete) ...................................... 195
7.5 RUGGEDCOM RX1500PN LM APE1404W7 (Obsolete) ......................................... 198
iv RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16

Table of Contents
7.6 RUGGEDCOM RX1500PN LM APE1404CKP (Obsolete) ......................................... 201
7.7 RUGGEDCOM RX1500PN LM APE1808LNX ......................................................... 204
7.8 RUGGEDCOM RX1500PN LM APE1808W10 ........................................................ 207
7.9 RUGGEDCOM RX1500PN LM APE1808CKP ......................................................... 210
7.10 RUGGEDCOM RX1500PN LM APE1808ADM ........................................................ 213
7.11 RUGGEDCOM RX1500PN LM APE1808SAM-L ...................................................... 216
8 Blank Modules ................................................................................................................... 219
8.1 RUGGEDCOM RX1500PN PS XXP ........................................................................ 220
8.2 RUGGEDCOM RX1500PN LM Blank .................................................................... 221
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16 v

Table of Contents
vi RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16

Preface
This document details RUGGEDCOM power and line modules available for use with
devices in the RUGGEDCOM RX1500/RX1501/RX1510/RX1511/RX1512/RX1524/
RX1536 series of multi-service routers and switches.
It is intended for use by network technical support personnel responsible for the
installation, commissioning and maintenance of routers and switches. It is also
recommended for use by network and system planners, system programmers, and
line technicians.
Related Documents
Other documents that may be of interest include:
Document Title Link
RUGGEDCOM RX1500 Installation Manual https://support.industry.siemens.com/cs/ww/en/
view/82166529
RUGGEDCOM RX1501 Installation Manual https://support.industry.siemens.com/cs/ww/en/
view/82164308
RUGGEDCOM RX1510 Installation Manual https://support.industry.siemens.com/cs/ww/en/
view/82164310
RUGGEDCOM RX1511 Installation Manual https://support.industry.siemens.com/cs/ww/en/
view/82166915
RUGGEDCOM RX1512 Installation Manual https://support.industry.siemens.com/cs/ww/en/
view/82167597
Accessing Documentation
The latest user documentation for RUGGEDCOM RX1500 is available online at https://
support.industry.siemens.com . To request or inquire about a user document,
contact Siemens Customer Support.
Registered Trademarks
RUGGEDCOM®, ROS®, RCDP®, and RUGGEDCOM Discovery Protocol® are registered
trademarks of Siemens Canada Ltd.
Linux® is the registered trademark of Linus Torvalds in the United States and other
countries.
The registered trademark Linux® is used pursuant to a sublicense from LMI, the
exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16 vii

Preface
Warranty
Other designations in this manual might be trademarks whose use by third parties
for their own purposes would infringe the rights of the owner.
Warranty
Refer to the License Agreement for the applicable warranty terms and conditions, if
any.
For warranty details, visit https://www.siemens.com or contact a Siemens customer
service representative.
Training
Siemens offers a wide range of educational services ranging from in-house training
of standard courses on networking, Ethernet switches and routers, to on-site
customized courses tailored to the customer's needs, experience and application.
Siemens' Educational Services team thrives on providing our customers with the
essential practical skills to make sure users have the right knowledge and expertise
to understand the various technologies associated with critical communications
network infrastructure technologies.
Siemens ' unique mix of IT/Telecommunications expertise combined with domain
knowledge in the utility, transportation and industrial markets, allows Siemens to
provide training specific to the customer's application.
For more information about training services and course availability, visit https://
www.siemens.com or contact a Siemens Sales representative.
Customer Support
Customer support is available 24 hours, 7 days a week for all Siemens customers.
For technical support or general information, contact Siemens Customer Support
through any of the following methods:
Online
Visit http://www.siemens.com/automation/support-request to submit a
Support Request (SR) or check on the status of an existing SR.
Telephone
Call a local hotline center to submit a Support Request (SR). To locate a
local hotline center, visit https://w3.siemens.com/aspa_app/?lang=en.
Mobile App
Install the Industry Online Support app by Siemens AG on any Android,
Apple iOS or Windows mobile device and be able to:
viii RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16

Preface
Contacting Siemens
• Access Siemens' extensive library of support documentation,
including FAQs and manuals
• Submit SRs or check on the status of an existing SR
• Contact a local Siemens representative from Sales, Technical Support,
Training, etc.
• Ask questions or share knowledge with fellow Siemens customers
and the support community
Contacting Siemens
Address Siemens AG
Industry Sector
300 Applewood Crescent
Concord, Ontario
Canada, L4K 5C7
Telephone Toll-free: 1 888 264 0006
Tel: [phone]
Fax: [phone]
E-Mail [email protected]
Web https://www.siemens.com
Ordering RUGGEDCOM Products
Use the RUGGEDCOM -Selector to select and configure RUGGEDCOM products and
accessories. Once selected, an item(s) can be transferred to the Siemens Industry
Mall and ordered.
RUGGEDCOM-Selector
http://www.siemens.com/ruggedcom-selector.
For more information, refer to https://www.siemens.com.
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16 ix

Preface
Ordering RUGGEDCOM Products
xRUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16

Introduction 1
This catalog details the various power and line modules available for the
RUGGEDCOM RX1500/RX1501/RX1510/RX1511/RX1512/RX1524/RX1536. Modules
allow network designers to quickly and cost effectively adjust their communications
infrastructure to the needs of the facilities and the network.
It is intended to be used as a supplement to the Installation Manual for the device.
For a list of related Installation Manuals, refer to "Related Documents (Page vii)".
NOTICE
Only qualified personnel should be allowed to install and work on this equipment.
Qualified persons in the sense of the safety-related notices in this manual are
defined as persons who are authorized to commission, to ground, and to tag
circuits, equipment, and systems in accordance with established safety practices and
standards.
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16 1

Introduction
1.1Available Modules
1.1 Available Modules
The following is a list of all power and line modules available for use in the
RUGGEDCOM RX1500/RX1501/RX1510/RX1511/RX1512/RX1524/RX1536.
Power Supply Modules
Note
The RUGGEDCOM RX1512 features a built-in power supply.
RUGGEDCOM RX1500PN PS 12 (shipped until
2019)
Specifications
Input Range: 9 to 15
VDC
Terminal Type: Non-
removable Screw
Article Numbers
6GK6015-0AL17-0AA0
(Standard)
6GK6015-0AL17-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN PS 12 (shipped from
2019 on)
Specifications
Input Range: 9 to 15
VDC
Terminal Type:
Removable Screw
Article Numbers
6GK6015-0AL17-0AA0
(Standard)
6GK6015-0AL17-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN PS 12P Specifications
Input Range: 9 to 15
VDC
Terminal Type:
European-style
(Euroblock)
Article Numbers
6GK6015-0AL18-0AA0
(Standard)
6GK6015-0AL18-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN PS 24 (shipped until
2019)
Specifications
Input Range: 13 to 36
VDC
Terminal Type: Non-
removable Screw
Article Numbers
6GK6015-0AL11-0AA0
(Standard)
6GK6015-0AL11-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN PS 24 (shipped from
2019 on)
Specifications
Input Range: 13 to 36
VDC
Terminal Type:
Removable Screw
Article Numbers
6GK6015-0AL11-0AA0
(Standard)
6GK6015-0AL11-0AA1
(Conformal Coated)
2RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16

Introduction
1.1Available Modules
RUGGEDCOM RX1500PN PS 24P Specifications
Input Range: 13 to 36
VDC
Terminal Type:
European-style
(Euroblock)
Article Numbers
6GK6015-0AL14-0AA0
(Standard)
6GK6015-0AL14-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN PS 48 (shipped until
2019)
Specifications
Input Range: 36 to 72
VDC
Terminal Type: Non-
removable Screw
Article Numbers
6GK6015-0AL12-0AA0
(Standard)
6GK6015-0AL12-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN PS 48 (shipped from
2019 on)
Specifications
Input Range: 36 to 72
VDC
Terminal Type:
Removable Screw
Article Numbers
6GK6015-0AL12-0AA0
(Standard)
6GK6015-0AL12-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN PS 48P Specifications
Input Range: 36 to 72
VDC
Terminal Type:
European-style
(Euroblock)
Article Numbers
6GK6015-0AL15-0AA0
(Standard)
6GK6015-0AL15-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN PS HI (shipped until
2019)
Specifications
Input Range: 88 to 300
VDC or 85 to 264 VAC
Terminal Type: Non-
removable Screw
Article Numbers
6GK6015-0AL13-0AA0
(Standard)
6GK6015-0AL13-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN PS HI (shipped from
2019 on)
Specifications Article Numbers
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16 3

Introduction
1.1Available Modules
Input Range: 88 to 300
VDC or 85 to 264 VAC
Terminal Type:
Removable Screw
6GK6015-0AL13-0AA0
(Standard)
6GK6015-0AL13-0AA1
(Conformal Coated)
RUGGEDCOM RX1500PN PS HIP Specifications
Input Range: 88 to 300
VDC or 85 to 264 VAC
Terminal Type:
European-style
(Euroblock)
Article Numbers
6GK6015-0AL16-0AA0
(Standard)
6GK6015-0AL16-0AA1
(Conformal Coated)
Copper Ethernet Modules
RUGGEDCOM RX1500PN LM CG01 Specifications
Ports: 2
Speed: 1000 Mbps
Interface: TX
Port Type: RJ45
Distance: 100 m (328 ft)
Article Numbers
6GK6015-0AL20-0FC0
(Standard)
6GK6015-0AL20-0FC1
(Conformal Coated)
RUGGEDCOM RX1500PN LM CG03 Specifications
Ports: 2
Speed: 1000 Mbps
Interface: TX
Port Type: M12 (8-Pin,
A-Coded)
Distance: 100 m (328 ft)
Article Numbers
6GK6015-0AL20-0PB0
(Standard)
6GK6015-0AL20-0PB1
(Conformal Coated)
RUGGEDCOM RX1500PN LM CG03B Specifications
Ports: 2
Speed: 1000 Mbps
Interface: TX
Port Type: M12 (8-Pin,
A-Coded, Controlled
Bypass)
Distance: 100 m (328 ft)
Article Numbers
6GK6015-0AL20-0PE0
(Standard)
6GK6015-0AL20-0PE1
(Conformal Coated)
RUGGEDCOM RX1500PN LM X CG04 Specifications
Ports: 2
Speed: 1000 Mbps
Interface: TX
Port Type: M12 (8-pin,
X-Coded)
Distance: 100 m (328 ft)
Article Numbers
6GK6015-0AL20-0PH0
(Standard)
6GK6015-0AL20-0PH1
(Conformal Coated)
RUGGEDCOM RX1500PN LM X CG04B Specifications Article Numbers
4RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16

Introduction
1.1Available Modules
Ports: 2
Speed: 1000 Mbps
Interface: TX
Port Type: M12 (8-pin,
X-Coded, Controlled
Bypass)
Distance: 100 m (328 ft)
6GK6015-0AL20-0PJ0
(Standard)
6GK6015-0AL20-0PJ1
(Conformal Coated)
RUGGEDCOM RX1500PN LM 4TX03 Specifications
Ports: 4
Speed: 100 Mbps
Interface: TX
Port Type: M12 (4-Pin,
A-Coded)
Distance: 100 m (328 ft)
Article Numbers
6GK6015-0AL20-0PC0
(Standard)
6GK6015-0AL20-0PC1
(Conformal Coated)
RUGGEDCOM RX1500PN LM 4TX03B Specifications
Ports: 4
Speed: 100 Mbps
Interface: TX
Port Type: M12 (8-Pin,
A-Coded, Controlled
Bypass)
Distance: 100 m (328 ft)
Article Numbers
6GK6015-0AL20-0PF0
(Standard)
6GK6015-0AL20-0PF1
(Conformal Coated)
RUGGEDCOM RX1500PN LM 4TX04 Specifications
Ports: 4
Speed: 100 Mbps
Interface: TX
Port Type: M12 (4-Pin,
D-Coded)
Distance: 100 m (328 ft)
Article Numbers
6GK6015-0AL20-0PD0
(Standard)
6GK6015-0AL20-0PD1
(Conformal Coated)
RUGGEDCOM RX1500PN LM 4TX04B Specifications
Ports: 4
Speed: 100 Mbps
Interface: TX
Port Type: M12 (4-Pin,
A-Coded, Controlled
Bypass)
Distance: 100 m (328 ft)
Article Numbers
6GK6015-0AL20-0PG0
(Standard)
6GK6015-0AL20-0PG1
(Conformal Coated)
RUGGEDCOM RX1500PN LM 6TX01 Specifications
Ports: 6
Speed: 100 Mbps
Interface: TX
Port Type: RJ45
Distance: 100 m (328 ft)
Article Numbers
6GK6015-0AL20-0NB0
(Standard)
6GK6015-0AL20-0NB1
(Conformal Coated)
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16 5

Introduction
1.1Available Modules
Fiber Optic Ethernet Modules
RUGGEDCOM RX1500PN LM 4FX11 Specifications
Mode: MM
Speed: 100 Mbps
Interface: FX
Wavelength: 1300 nm
Ports: 4
Port Type: LC
Distance: 2 km (1.2 mi)
Article Numbers
6GK6015-0AL20-0BC0
(Standard)
6GK6015-0AL20-0BC1
(Conformal Coated)
RUGGEDCOM RX1500PN LM FL01 Specifications
Mode: MM
Speed: 10/100 Mbps
Interface: FL/SX
Wavelength: 820 nm
Ports: 3
Port Type: ST
Distance: 2 km (1.2 mi)
Article Numbers
6GK6015-0AL20-0BD0
(Standard)
6GK6015-0AL20-0BD1
(Conformal Coated)
RUGGEDCOM RX1500PN LM FG03 Specifications
Mode: SM
Speed: 1000 Mbps
Interface: LX
Wavelength: 820 nm
Ports: 4
Port Type: LC
Distance: 10 km (6.2
mi)
Article Numbers
6GK6015-0AL20-0EC0
(Standard)
6GK6015-0AL20-0EC1
(Conformal Coated)
RUGGEDCOM RX1500PN LM FG50 Specifications
SFP Sockets: 2
Speed: 1000 Mbps
Article Numbers
6GK6015-0AL20-0JB0
(Standard)
6GK6015-0AL20-0JB1
(Conformal Coated)
RUGGEDCOM RX1500PN LM FG51 Specifications
Mode: MM
Speed: 1000 Mbps
Interface: SX
Wavelength: 820 nm
Ports: 2
Port Type: LC
Distance: 500 m (1640
ft)
Article Numbers
GK60150-AL200-DC0
(Standard)
GK60150-AL200-DC1
(Conformal Coated)
RUGGEDCOM RX1500PN LM FX50 Specifications
SFP Sockets: 4
Speed: 100 Mbps
Article Numbers
6GK6015-0AL20-0JC0
(Standard)
6RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16

Introduction
1.1Available Modules
6GK6015-0AL20-0JC1
(Conformal Coated)
RUGGEDCOM RX1500PN LM FX51 Specifications
Mode: SM
Speed: 100 Mbps
Interface: FX
Wavelength: 1310 nm
Ports: 2
Port Type: LC
Distance: 2 km (1.2 mi)
Article Numbers
6GK6015-0AL20-0BJ0
(Standard)
6GK6015-0AL20-0BJ1
(Conformal Coated)
RUGGEDCOM RX1500PN LM 6FX50 Specifications
SFP Sockets: 6
Speed: 100 Mbps
Article Numbers
6GK6015-0AL20-0JD0
(Standard)
6GK6015-0AL20-0JD1
(Conformal Coated)
RUGGEDCOM RX1500PN LM 6FX51 Specifications
Mode: MM
Speed: 100 Mbps
Interface: FX
Wavelength: 1310 nm
Ports: 6
Port Type: LC
Distance: 2 km (1.2 mi)
Article Numbers
6GK6015-0AL20-0BK0
(Standard)
6GK6015-0AL20-0BK1
(Conformal Coated)
WAN Modules
RUGGEDCOM RX1500PN LM S01 Specifications
Standard: RS232/RS422/
RS485
Ports: 6
Port Type: RJ45
Article Numbers
6GK6015-0AL20-0KB0
(Standard)
6GK6015-0AL20-0KB1
(Conformal Coated)
RUGGEDCOM RX1500PN LM TC1 Specifications
Interface: T1/E1
Ports: 1
Port Type: RJ48C
Article Numbers
6GK6015-0AL20-0MB0
(Standard)
6GK6015-0AL20-0MB1
(Conformal Coated)
RUGGEDCOM RX1500PN LM TC2 Specifications
Interface: T1/E1
Ports: 2
Port Type: RJ48C
Article Numbers
6GK6015-0AL20-0MC0
(Standard)
6GK6015-0AL20-0MC1
(Conformal Coated)
RUGGEDCOM RX1500PN LM TC4 Specifications
Interface: T1/E1
Article Numbers
6GK6015-0AL20-0MD0
(Standard)
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16 7

Introduction
1.1Available Modules
Ports: 4
Port Type: RJ48C
6GK6015-0AL20-0MD1
(Conformal Coated)
RUGGEDCOM RX1500PN LM E02 Specifications
Interface: E1
Ports: 2
Port Type: BNC (75 Ω)
Article Numbers
6GK6015-0AL20-0HC0
(Standard)
6GK6015-0AL20-0HC1
(Conformal Coated)
RUGGEDCOM RX1500PN LM D02 Specifications
Speed: 56 kbps (Master/
Slave) or 64 kbps
(Slave)
Ports: 1
Port Type: RJ48S
Article Numbers
6GK6015-0AL20-0LB0
(Standard)
6GK6015-0AL20-0LB1
(Conformal Coated)
Cellular Modem Modules
RUGGEDCOM RX1500PN LM W11 Specifications
Services: GSM/EDGE/
HSPA+
Region: North America
(AT&T)
Port Type: 50 Ω SMA
Antennas: 1 x GSM/
EDGE/HSPA+, 1 x
Receive Diversity
(Secondary)
SIM: Dual Mini-SIM
(2FF)
Article Numbers
6GK6015-0AL20-0WB0
(Standard)
6GK6015-0AL20-0WB1
(Conformal Coated)
RUGGEDCOM RX1500PN LM W12 Specifications
Services: GSM/EDGE/
HSPA+
Region: North America
(AT&T), European
Union, Australia
Port Type: 50 Ω SMA
Antennas: 2 x GSM/
EDGE/HSPA+, 2 x
Receive Diversity
(Secondary)
SIM: Dual Mini-SIM
(2FF)
Article Numbers
6GK6015-0AL20-0WC0
(Standard)
6GK6015-0AL20-0WC1
(Conformal Coated)
RUGGEDCOM RX1500PN LM W21 Specifications
Services: EVDO Rev A
Region: North America
(Verizon)
Port Type: 50 Ω SMA
Article Numbers
6GK6015-0AL20-0WD0
(Standard)
6GK6015-0AL20-0WD1
(Conformal Coated)
8RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16

Introduction
1.1Available Modules
Antennas: 1 x EVDO Rev
A, 1 x Receive Diversity
(Secondary)
SIM: Dual Mini-SIM
(2FF)
RUGGEDCOM RX1500PN LM W22 Specifications
Services: EVDO Rev A
Region: North America
(Verizon)
Port Type: 50 Ω SMA
Antennas: 2 x EVDO Rev
A, 2 x Receive Diversity
(Secondary)
SIM: Dual Mini-SIM
(2FF)
Article Numbers
6GK6015-0AL20-0WE0
(Standard)
6GK6015-0AL20-0WE1
(Conformal Coated)
RUGGEDCOM RX1500PN LM W32 Specifications
Services: EVDO Rev A
Region: North America
(Verizon)
Port Type: 50 Ω SMA
Antennas: 1 x GSM/
EDGE/HSPA+, 1 x EVDO
Rev A, 2 x Receive
Diversity (Secondary)
SIM: Dual Mini-SIM
(2FF)
Article Numbers
6GK6015-0AL20-0WF0
(Standard)
6GK6015-0AL20-0WF1
(Conformal Coated)
RUGGEDCOM RX1500PN LM W41 Specifications
Services: 4G LTE/HSPA+/
HSDPA/HSUPA/DC-HSPA
+/UMTS/WCDAM/EDGE/
GPRS/GSM/GNSS
Region: European Union
Port Type: 50 Ω SMA
Antennas: 1 x LTE Main,
1 x LTE MIMO, 1 x GPS
SIM: Dual Mini-SIM
(2FF)
Article Numbers
6GK6015-0AL20-0WG0
(Standard)
6GK6015-0AL20-0WG1
(Conformal Coated)
RUGGEDCOM RX1500PN LM W51 Specifications
Services: 4G LTE/HSPA+/
HSDPA/HSUPA/DC-HSAP
+/UMTS/WDCAM/EDGE/
GPRS/GSM/CDMA/EVDO/
GNSS
Region: North America
(AT&T, Rogers, Bell,
Telus)
Port Type: 50 Ω SMA
Antennas: 1 x LTE Main,
1 x LTE MIMO, 1 x GPS
Article Numbers
6GK6015-0AL20-0WH0
(Standard)
6GK6015-0AL20-0WH1
(Conformal Coated)
RUGGEDCOM Modules
Catalog, 07/2021, C79000-G8976-1320-16 9