Siemens Reyrolle 7SR5 User manual

Reyrolle 7SR5
Hardware
V01.00
Manual
C53000-T7040-C013-1
Preface
Open Source Software
Table of Contents
Introduction 1
Devices and Front Fascia Panels 2
Device Modules 3
Working with the Device 4
Technical Data 5

i
i
NOTE
For your own safety, observe the warnings and safety instructions contained in this document, if available.
Disclaimer of Liability
Subject to changes and errors. The information given in
this document only contains general descriptions and/or
performance features which may not always specifically
reflect those described, or which may undergo modifica-
tion in the course of further development of the products.
The requested performance features are binding only when
they are expressly agreed upon in the concluded contract.
Document version: C53000-T7040-C013-1.01.00
Edition: 11.2019
Version of the product described: V01.00
Copyright
Copyright © Siemens 2019. All rights reserved.
The disclosure, duplication, distribution and editing of this
document, or utilization and communication of the content
are not permitted, unless authorized in writing. All rights,
including rights created by patent grant or registration of a
utility model or a design, are reserved.

Preface
Purpose of the Manual
This manual describes the hardware of the Reyrolle device family and provides general information on the
product structure, the modules and technical data.
Target Audience
This manual is mainly intended for protection system engineers, commissioning engineers, persons entrusted
with the setting, testing and maintenance of automation, selective protection and control equipment, and
operational crew in electrical installations and power plants.
Scope
This manual applies to the Reyrolle device family.
Further Documentation
[dw_7SR5_furtherdocumentation_hardwaremanual, 1, en_US]
•Device manuals
Each device manual describes the functions and applications of a specific Reyrolle device. The printed
manual for the device has the same informational structure.
•Hardware manual
The hardware manual describes the hardware building blocks and device combinations of the Reyrolle
device family.
Reyrolle 7SR5, Hardware, Manual 3
C53000-T7040-C013-1, Edition 11.2019

•Operating manual
The operating manual describes the basic principles and procedures for operating and installing the
devices of the Reyrolle range.
•Communication protocol manual
The communication protocol manual contains a description of the protocols for communication within
the Reyrolle device family and to higher-level network control centers.
•Product information
The product information includes general information about device installation, technical data, limiting
values for input and output modules, and conditions when preparing for operation. This document is
provided with each Reyrolle device.
•Engineering Guide
The engineering guide describes the essential steps when engineering with Reydisp Manager 2. In addi-
tion, the engineering guide shows you how to load a planned configuration to a Reyrolle device and
update the functionality of the Reyrolle device.
•Virtual Relay
The virtual relay allows a user to view, control and manipulate a virtual device. The virtual relay is a tool
that can facilitate training and understanding of the controls and functions on a Reyrolle device.
•Reyrolle catalog
The Reyrolle catalog describes the system features and the devices of Reyrolle .
•Selection guide for Reyrolle and SIPROTEC
The selection guide offers an overview of the device series of the Siemens protection devices, and a
device selection table.
Indication of Conformity
This product is CE-compliant to relevant EU directives.
Additional Support
For questions about the system, contact your Siemens sales partner.
Customer Support Center
Our Customer Support Center provides a 24-hour service.
Siemens AG
Customer Support Center
Humboldtstrasse 59
90459 Nuremberg
Germany
E-mail: [email protected]
Training Courses
Inquiries regarding individual training courses should be addressed to our Training Center:
Siemens AG Phone: [phone]
Siemens Power Academy TD Fax: [phone]
Humboldtstrasse 59 E-mail: [email protected]
90459 Nuremberg Internet: www.siemens.com/poweracademy
Germany
Preface
4 Reyrolle 7SR5, Hardware, Manual
C53000-T7040-C013-1, Edition 11.2019

Notes on Safety
This document is not a complete index of all safety measures required for operation of the equipment (module
or device). However, it comprises important information that must be followed for personal safety, as well as
to avoid material damage. Information is highlighted and illustrated as follows according to the degree of
danger:
!
DANGER
DANGER means that death or severe injury will result if the measures specified are not taken.
²Comply with all instructions, in order to avoid death or severe injuries.
!
WARNING
WARNING means that death or severe injury may result if the measures specified are not taken.
²Comply with all instructions, in order to avoid death or severe injuries.
!
CAUTION
CAUTION means that medium-severe or slight injuries can occur if the specified measures are not taken.
²Comply with all instructions, in order to avoid moderate or minor injuries.
NOTICE
NOTICE means that property damage can result if the measures specified are not taken.
²Comply with all instructions, in order to avoid property damage.
i
i
NOTE
Important information about the product, product handling or a certain section of the documentation
which must be given attention.
Qualified Electrical Engineering Personnel
Only qualified electrical engineering personnel may commission and operate the equipment (module, device)
described in this document. Qualified electrical engineering personnel in the sense of this manual are people
who can demonstrate technical qualifications as electrical technicians. These persons may commission,
isolate, ground and label devices, systems and circuits according to the standards of safety engineering.
Proper Use
The equipment (device, module) may be used only for such applications as set out in the catalogs and the
technical description, and only in combination with third-party equipment recommended and approved by
Siemens.
Problem-free and safe operation of the product depends on the following:
•Proper transport
•Proper storage, setup and installation
•Proper operation and maintenance
Preface
Reyrolle 7SR5, Hardware, Manual 5
C53000-T7040-C013-1, Edition 11.2019

When electrical equipment is operated, hazardous voltages are inevitably present in certain parts. If proper
action is not taken, death, severe injury or property damage can result:
•The equipment must be grounded at the grounding terminal before any connections are made.
•All circuit components connected to the power supply may be subject to dangerous voltage.
•Hazardous voltages may be present in equipment even after the supply voltage has been disconnected
(capacitors can still be charged).
•Operation of equipment with exposed current-transformer circuits is prohibited. Before disconnecting the
equipment, ensure that the current-transformer circuits are short-circuited.
•The limiting values stated in the document must not be exceeded. This must also be considered during
testing and commissioning.
•Terminals are exposed when the device element is removed from the case.
Used Symbols on Device
No. Symbol Description
1 Direct current, IEC 60417, 5031
2 Alternating current, IEC 60417, 5032
3 Direct and alternating current, IEC 60417, 5033
4 Earth (ground) terminal, IEC 60417, 5017
5 Protective conductor terminal, IEC 60417, 5019
6 Caution, risk of electric shock
7 Caution, risk of danger, ISO 7000, 0434
8 Guideline 2002/96/EC for electrical and electronic devices
9 Guideline for the Eurasian Market
Preface
6 Reyrolle 7SR5, Hardware, Manual
C53000-T7040-C013-1, Edition 11.2019

Open Source Software
The product contains, among other things, Open Source Software developed by third parties. The Open
Source Software used in the product and the license agreements concerning this software can be found in the
Readme_OSS. These Open Source Software files are protected by copyright. Your compliance with those
license conditions will entitle you to use the Open Source Software as foreseen in the relevant license. In the
event of conflicts between Siemens license conditions and the Open Source Software license conditions, the
Open Source Software conditions shall prevail with respect to the Open Source Software portions of the soft-
ware. The Open Source Software is licensed royalty-free. Insofar as the applicable Open Source Software
License Conditions provide for it you can order the source code of the Open Source Software from your
Siemens sales contact – against payment of the shipping and handling charges – for a period of at least 3
years after purchase of the product. We are liable for the product including the Open Source Software
contained in it pursuant to the license conditions applicable to the product. Any liability for the Open Source
Software beyond the program flow intended for the product is explicitly excluded. Furthermore any liability
for defects resulting from modifications to the Open Source Software by you or third parties is excluded. We
do not provide any technical support for the product if it has been modified.
The ReadmeOSS documents for the product can be found here: Siemens.com/Reyrolle
Reyrolle 7SR5, Hardware, Manual 7
C53000-T7040-C013-1, Edition 11.2019

8 Reyrolle 7SR5, Hardware, Manual
C53000-T7040-C013-1, Edition 11.2019

Table of Contents
Preface..........................................................................................................................................................3
Open Source Software..................................................................................................................................7
1 Introduction................................................................................................................................................11
1.1 Design and Hardware Characteristics.................................................................................12
2 Devices and Front Fascia Panels.................................................................................................................17
2.1 Dimension Drawings......................................................................................................... 18
3 Device Modules.......................................................................................................................................... 21
3.1 Processor Module..............................................................................................................22
3.2 Power‑Supply Module....................................................................................................... 23
3.3 Binary Input/Binary Output Modules.................................................................................. 24
3.4 CT Module........................................................................................................................ 25
3.5 VT Module........................................................................................................................ 26
4 Working with the Device............................................................................................................................ 27
4.1 Safety Information............................................................................................................ 28
5 Technical Data............................................................................................................................................ 31
5.1 Analog Inputs................................................................................................................... 32
5.2 Supply Voltage..................................................................................................................33
5.3 Binary Inputs.....................................................................................................................35
5.4 Binary Outputs..................................................................................................................36
5.5 Communication Interfaces................................................................................................ 37
5.6 Electrical Tests.................................................................................................................. 39
5.7 Mechanical Tests...............................................................................................................41
5.8 Environmental Conditions................................................................................................. 42
5.9 Operating Conditions........................................................................................................ 43
5.10 Reference Conditions and Influencing Variables.................................................................44
5.11 Approvals and Certification............................................................................................... 45
5.12 Design Data...................................................................................................................... 46
5.13 Assembly Dimensions....................................................................................................... 47
5.14 Labeling............................................................................................................................49
5.15 Display Resolution.............................................................................................................51
Reyrolle 7SR5, Hardware, Manual 9
C53000-T7040-C013-1, Edition 11.2019

10 Reyrolle 7SR5, Hardware, Manual
C53000-T7040-C013-1, Edition 11.2019

Introduction
1.1 Design and Hardware Characteristics 12
1
Reyrolle 7SR5, Hardware, Manual 11
C53000-T7040-C013-1, Edition 11.2019

Design and Hardware Characteristics
Reyrolle 5 (7SR5) devices are supplied in size 6 and size 12 cases.
[sc_7SR5_size6_FrontPhotoAngle, 1, --_--]
Figure 1-1 Size 6 Device
The devices can be panel mounted or fitted into standard 19 inch rack systems.
Dimensions are shown in Figure 2-1 and Figure 2-2.
1.1
Introduction
1.1 Design and Hardware Characteristics
12 Reyrolle 7SR5, Hardware, Manual
C53000-T7040-C013-1, Edition 11.2019

[sc_7SR5_size12_FrontPhotoAngleWithdrawn, 1, --_--]
Figure 1-2 Size 12 Device with Element Withdrawn from Case
The relay element can be withdrawn from the relay case see Figure 1-2
!
CAUTION
Inserting the Device Element
²When inserting the device element into the case, handle only from the front of the device fascia and
ensure no objects obstruct insertion of the element.
Introduction
1.1 Design and Hardware Characteristics
Reyrolle 7SR5, Hardware, Manual 13
C53000-T7040-C013-1, Edition 11.2019

[sc_7SR5_Size6_rear, 1, --_--]
Size 6 Device (Rear)
Introduction
1.1 Design and Hardware Characteristics
14 Reyrolle 7SR5, Hardware, Manual
C53000-T7040-C013-1, Edition 11.2019

[7SR5 Fascia - Example Mimic Displays, 1, --_--]
Figure 1-3 Example Mimic Display
Introduction
1.1 Design and Hardware Characteristics
Reyrolle 7SR5, Hardware, Manual 15
C53000-T7040-C013-1, Edition 11.2019

16 Reyrolle 7SR5, Hardware, Manual
C53000-T7040-C013-1, Edition 11.2019

Devices and Front Fascia Panels
2.1 Dimension Drawings 18
2
Reyrolle 7SR5, Hardware, Manual 17
C53000-T7040-C013-1, Edition 11.2019

Dimension Drawings
[dw_7SR5_E6_dimensions, 1, en_US]
Figure 2-1 Size 6 Case
2.1
Devices and Front Fascia Panels
2.1 Dimension Drawings
18 Reyrolle 7SR5, Hardware, Manual
C53000-T7040-C013-1, Edition 11.2019

[dw_7SR5_E12_dimensions, 1, en_US]
Figure 2-2 Size 12 Case
Devices and Front Fascia Panels
2.1 Dimension Drawings
Reyrolle 7SR5, Hardware, Manual 19
C53000-T7040-C013-1, Edition 11.2019

20 Reyrolle 7SR5, Hardware, Manual
C53000-T7040-C013-1, Edition 11.2019