Siemens Gigaset C670 User manual

s
Gigaset
Gigaset C670
Issued by
Gigaset Communications GmbH
Schlavenhorst 66, D-46395 Bocholt
Gigaset Communications GmbH is a trademark licensee of Siemens AG
© Gigaset Communications GmbH 2008
All rights reserved.
Subject to availability. Rights of modifications reserved.
www.gigaset.com

1
The handset at a glance
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / overview.fm / 5.9.08
Version 4, 16.09.2005
The handset at a glance
Handset LCD
1Display
2Directory
3Navikey
q up/down,
é/êMenu/OK
ñ/ðVolume
t Call Log
4Handsfree
5 Talk
6 Digital keys
7 * Key (Ringer off by long press)
8 Flash Key
9 Call-by-call list key
10 Intercom Key
11 End/Back (On/Off by long press)
12 Redial/Delete
13 # Key (Lock keypad by long press)
14 Mute Key
1
3
5
6
7
8
10
11
12
13
14
4
92
1 Radio signal
2 Talk
3 Incoming Call
4Ringeroff
5 Keypad lock
6Handsfree
7Directory
8 Battery Icon
9 Handset Name
10 Date and Time
11 Weekday
1234567 8
10
11
9

2
The base at a glance
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / overview.fm / 5.9.08
Version 4, 16.09.2005
The base at a glance
3
5
6
7
8
4
2
9
1
11
15 13 121617 14
10
1Display
2UsingLED
3PowerLED
4Intercom/Paging
5 Call log
6Navi-key
q up/down,
é/êMenu/OK
ñ/ðVolume
7 Call-by-call list key
8Directory
9Back
10 Delete
11 Hands free
12 # Key
13 Digital Keys
14 * Key/Ringer off
15 Redial Key
16 Mute
17 Flash

3
The base at a glance
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / overview.fm / 5.9.08
Version 4, 16.09.2005
Base LCD
1Date
2Time
3Menumode
4 Registering
5 Intercom/Internal call
6Ringeroff
7Missedcall
8 Incoming call
9 If call (8):Number of incoming calls
If directory (10): Record number
10 Directory
11 Missed call
(country, network and provider-dependent:
not shown if VMWI network service not sup-
ported)
123456789
10
11

4
Contents
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / C670IVZ.fm / 5.9.08
Version 4, 16.09.2005
Contents
The handset at a glance . . . . . . . . 1
The base at a glance . . . . . . . . . . . 2
Safety precautions . . . . . . . . . . . . 5
First steps . . . . . . . . . . . . . . . . . . . . 7
Installing the base station . . . . . . . . . . 7
Setting up the handset for use . . . . . . . 7
Registering handsets . . . . . . . . . . . . . . 8
Deregistering handsets . . . . . . . . . . . . 8
Locating a handset ("paging") . . . . . . . 8
Setting the date and time . . . . . . . . . . 9
Operating the handset . . . . . . . . . 9
Activating/deactivating the keypad lock 9
Ringer OFF/ON . . . . . . . . . . . . . . . . . . . 9
Reverting to idle status . . . . . . . . . . . . . 9
Operating the menu . . . . . . . . . . . . . . . 9
Correcting incorrect entries . . . . . . . . . 9
Scrolling to display long number . . . . . 9
Menu trees . . . . . . . . . . . . . . . . . . 10
Menu tree (Handset) . . . . . . . . . . . . . 10
Menu tree (Base) . . . . . . . . . . . . . . . . 11
Making calls . . . . . . . . . . . . . . . . . 12
Making an external call . . . . . . . . . . . 12
Accepting a call . . . . . . . . . . . . . . . . . 12
Adjusting talking volume . . . . . . . . . . 12
Muting . . . . . . . . . . . . . . . . . . . . . . . . 12
Ending a call . . . . . . . . . . . . . . . . . . . . 12
Activating/deactivating
auto answer . . . . . . . . . . . . . . . . . . . . 12
Calling Line Identification . . . . . . . . . 12
Using the directory and lists . . . 13
Directory . . . . . . . . . . . . . . . . . . . . . . . 13
Last number redial list . . . . . . . . . . . . 13
Call-by-call list . . . . . . . . . . . . . . . . . . . 14
Using several handsets . . . . . . . . 15
Making internal calls/Intercom . . . . . . 15
Conference calls . . . . . . . . . . . . . . . . . 15
Setting the handset . . . . . . . . . . 16
Changing audio settings . . . . . . . . . . . 16
Setting the contrast . . . . . . . . . . . . . . 16
Setting the key tone . . . . . . . . . . . . . . 16
Changing the display language . . . . . 16
Restoring the handset to the
factory settings . . . . . . . . . . . . . . . . . . 16
Setting the base . . . . . . . . . . . . . 17
Setting the date and time . . . . . . . . . . 17
Changing audio settings . . . . . . . . . . . 17
Setting the key tone . . . . . . . . . . . . . . 17
Setting the contrast . . . . . . . . . . . . . . 17
Restoring the base to the
factory settings . . . . . . . . . . . . . . . . . . 17
Connecting the base
to PABX . . . . . . . . . . . . . . . . . . . . 18
Dialling modes and flash time . . . . . . 18
Saving an access code
(PABX prefix) . . . . . . . . . . . . . . . . . . . . 18
Network Setting . . . . . . . . . . . . . . . . . 18
Appendix . . . . . . . . . . . . . . . . . . 19
Care . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Contact with liquid . . . . . . . . . . . . . . . 19
Questions and answers . . . . . . . . . . . . 19
Authorisation . . . . . . . . . . . . . . . . . . . 19
Service (Customer Care) . . . . . . . . . . . 20
General Specifications . . . . . . . . . . . . 21
Writing and editing text . . . . . . . . . . . 21
Index . . . . . . . . . . . . . . . . . . . . . . 23

5
Safety precautions
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / security.fm / 5.9.08
Version 4, 16.09.2005
Safety precautions
Warning:
Read the safety precautions and the user guide before use.
Explain their contents and the potential hazards associated with using the telephone to your children.
Only use the mains adapter supplied, as indicated on the underside of the base
station or charging cradle.
Only use the recommended, rechargeable batteries (page 21), i.e. never use
a conventional (non-rechargeable) battery or other battery types as this could
result in significant health risks and personal injury.
Batteries should not be disposed of in general household waste. Observe the
local waste disposal regulations, details of which can be obtained from your
local authority or the dealer you purchased the product from.
The operation of medical appliances may be affected. Be aware of the technical
conditions in your particular environment, e.g. doctor's surgery.
Do not hold the rear of the handset to your ear when it is ringing or when the
handsfree function is activated. Otherwise you risk serious and permanent dam-
age to your hearing.
The handset may cause an unpleasant humming noise in hearing aids.
Do not install the base station or charging cradle in bathrooms or shower rooms.
The base station and charging cradle are not splashproof (page 19).
Do not use your phone in environments with a potential explosion hazard
(e.g. paint shops).
If you give your Gigaset to someone else, make sure you also give them the user
guide.
Please remove faulty base stations from use or have them repaired by our
Service, as they could interfere with other wireless services.
$
ƒ

6
Safety precautions
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / security.fm / 5.9.08
Version 4, 16.09.2005
All electrical and electronic equipment must be disposed of separately from gen-
eral household waste using the sites designated by local authorities.
If a product displays this symbol of a crossed-out rubbish bin, the product is sub-
ject to European Directive 2002/96/EC.
The appropriate disposal and separate collection of used equipment serve to
prevent potential harm to the environment and to health. They are a precondi-
tion for the re-use and recycling of used electrical and electronic equipment.
For further information on disposing of your used equipment, please contact
your local authority, your refuse collection service or the dealer you purchased
the product from.
Please note:
Not all of the functions described in this user guide are available in all countries.

7
First steps
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / starting.fm / 5.9.08
Version 4, 16.09.2005
First steps
Installing the base station
The base station is designed for use in
closed, dry rooms with a temperature
range of +5 °C to +45 °C.
Set up the base station at a central point in
your apartment or house.
Please note:
uNever expose the telephone to heat
sources, direct sunlight or other electri-
cal appliances.
uProtect your Gigaset from moisture,
dust, corrosive liquids and vapours.
Range and reception strength
Range:
uOutdoors: up to 300 m
uIndoors: up to 50 m
Connecting the base station
¤First connect the power supply unit
and then the phone jack as shown
below.
1 Power supply unit 220 V
2 Phone jack with phone cord
Please note:
uThe mains adapter must always be
connected, as the phone will not oper-
ate without mains connection.
uOnly use the mains adapter and phone
cord supplied.
uIf you buy a replacement phone cord,
make sure that the phone jack has the
correct type of wiring.
Setting up the handset for use
Inserting the batteries
¤Insert the batteries the right way
round.
The polarity is indicated in/on the battery
compartment.
Closing the battery cover
Put the cover on the phone as indicated on
the picture below. Push the cover upward
12
Warning:
Use only the rechargeable batteries recom-
mended by Gigaset Communicatins GmbH*.
Never use a conventional (non-rechargeable)
battery or other battery types as this could
result in significant health risks and personal
injury. For example, the batteries could
explode. The phone could also malfunction or
be damaged as a result of using batteries that
are not of the recommended type.
* Gigaset Communications GmbH is a trademark
licensee of Siemens AG.

8
First steps
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / starting.fm / 5.9.08
Version 4, 16.09.2005
until click sound is heard, means the cover
is fixed properly.
Opening the battery cover
Push downward to open the cover.
Initial charging and discharging of
batteries
If the handset is activated, the flashing
battery icon in the top right of the display
indicates that the batteries are being
charged.
During handset operation, the battery
icon indicates the charge status of the bat-
teries . The correct charge level can only
be displayed if the batteries are first fully
charged and discharged.
¤To do this, leave the handset in the
charging cradle without interruption
for 15 hours.
¤Afterwards, remove the handset from
the charging cradle and do not put it
back again until the batteries are fully
discharged.
Please note:
uAlways repeat the charging and dis-
charging procedure if you remove the
batteries from the handset and reinsert
them.
uThe batteries may warm up during
charging. This is not dangerous.
uAfter a while the charge capacity of the
batteries will decrease for technical rea-
sons.
Registering handsets
You can register up to four handsets to
your base.
Registering the handset to the base sta-
tion occurs automatically on first using.
If the automatic register failed, please do
the operations on the handset and on the
base as below.
Operations on the handset
¤Press é.
¤Select ADVANCEDSET.with qand con-
firm with ê.
¤Select REGISTRATION and confirm with
ê.
¤Confirm both messages with ê.
¤Proceed with the operations on the
base.
Operations on the base
¤Press and hold the paging key ÷(ç)
on the base until beep sounds (approx.
3 sec.).
¤Input the handset name and confirm
with ê.
Once it has been registered successfully,
the handset returns to idle status. The
name and the handset’s internal number
is shown in the display e.g. INT 1.
If fail to register, repeat the procedure.
Deregistering handsets
¤Press é.
¤Select ADVANCEDSET.with qand con-
firm with ê.
¤Select DEREGISTRATION and confirm
with ê.
Please note:
After the first battery charge and discharge
you may replace your handset in its charger
after every call.
Please note:
Do not deregister handsets unless necessary!

9
Operating the handset
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / starting.fm / 5.9.08
Version 4, 16.09.2005
¤Confirm the message with ê.
¤DEREGISTERED is displayed.
Handset will ask for registering after
deregistered, otherwise you will not able
to dial by handset.
Locating a handset ("paging")
You can locate your handset using the
base station.
Briefly press the paging key ÷(ç) on
the base station ¢PAGING EXTENSION?
¢Input the number of handset for pag-
ing or press *Key for all handsets
Handsets paged will ring, even if the
ringer tones are deactivated.
Ending paging
¤Briefly press the paging key ÷(ç) on
the base station or press the end key
aon the handset.
Setting the date and time
Set the date and time so that the correct
date and time can be assigned to incom-
ing calls.
¤Press é.
¤Select TIME SETTING with qand con-
firm with ê.
¤Input the time/date and confirm with
ê.
e.g. set time and date to 2008-7-17 20:38
¤Enter TIME SETTING
¤Ordinal input:
2QM2QQ
MQLLê.
You do not need to set time and date again
on base, for handset will synchronize this
setting to base automatically.
Operating the handset
Activating/deactivating the
keypad lock
Long press #(handset) to toggle lock
and unlock.
The Øicon appears in the display when
the keypad lock is activated.
The keypad lock is deactivated automati-
cally if someone calls you. It is re-activated
when the call is finished.

10
Operating the handset
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / starting.fm / 5.9.08
Version 4, 16.09.2005
Ringer OFF/ON
Long press *to turn off ringer tone.
Handset displays Úand the base displays
Ö.
Long press *once again to turn on
ringer.
Reverting to idle status
You can revert to idle status as follows:
¤Press the end call key a(handset)
back to idle.
Or:
¤Press èkey (base) back to idle.
Changes that you have not confirmed or
saved will be lost.
Operating the menu
Your telephone's functions are accessed
using a menu.
¤Press é with the handset in idle status
to open the main menu.
¤Navigate to the function using the con-
trol key q. Press the êkey to access
the function.
Correcting incorrect entries
uPress õto delete the character to the
left of the cursor.
Scrolling to display long number
If a telephone number is more than 12
digits in Phonebook or Redial list, the icon
gis displayed.
You can use the Q for scrolling to dis-
play next digits of the whole number.

10
Menu trees
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / menuetree.fm / 5.9.08
Version 4, 16.09.2005
Menu trees
Menu tree (Handset)
AUDIO SETTING RINGER VOLUME HIGH
MEDIUM
LOW
OFF
ASCENDING
RINGER MELODY MELODY 1
...
MELODY 10
CONFERENCE ON
OFF
TIME SETTING
PERSONAL SET. CALL LOGS ALL CALLS
MISSED CALL
AUTO ANSWER ON
OFF
CONTRAST LEVEL 1
LEVEL 2
LEVEL 3
KEY BEEP ON
OFF
LANGUAGE FRENCH
ENGLISH
ADVANCED SET. REGISTRATION
DEREGISTRATION
HANDSET RESET NO
YES

11
Menu trees
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / menuetree.fm / 5.9.08
Version 4, 16.09.2005
Menu tree (Base)
TIME SETTING
AUDIO SETTING RINGER VOLUME HIGH
MEDIUM
LOW
OFF
RINGER MELODY MELODY 1
...
MELODY 10
KEY BEEP ON
OFF
CONTRAST LEVEL 1
LEVEL 2
LEVEL 3
FLASH TIME 100
300
600
TONE/PULSE TONE
PULSE
NETWORK PUBLIC NET.
PRIVATE NET.
BASE RESET YES
NO
PABX PREFIX

12
Making calls
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / telefony.fm / 5.9.08
Version 4, 16.09.2005
Making calls
Making an external call
External calls are calls using the public tel-
ephone network.
¤Enter the number and press the talk key
c or d.
Or:
¤Press c or dand then enter the
number.
You can cancel the dialling operation with
the end call key a.
Accepting a call
Press c or dand to accept an incom-
ing call.
If the handset is in the charging cradle and
the AUTO ANSWER function is activated,
the handset will take a call automatically
when you lift it out of the cradle.
Adjusting talking volume
Press ð or ñ(r)to adjust the talking
volume.
Muting
¤Press Nto deactivate the microphone
in your handset during an external call.
¤Press Nagain to reactivate the micro-
phone.
Ending a call
Press the end call key a.
Activating/deactivating
auto answer
If you activate this function, when you
receive a call you can simply lift the hand-
set out of the charging cradle without hav-
ing to press the talk key c.
¤Press é.
¤Select PERSONALSET.with qand con-
firm with ê.
¤Select AUTO ANSWER and confirm with
ê.
¤Select ON or OFF and confirm with ê.
Calling Line Identification
Precondition:
You have applied the CID service.
When you get a call, the caller's phone
number will be displayed on your handset.
The caller's name and number will be both
displayed if it is stored in the phonebook
Please note:
The phone was made according to the
national standards. However sometimes
the CID function can't be displayed prop-
erly for the reason of some special using
condition: e.g. connecting several phones
on a single line or the PABX is not a stand-
ard appliance. Please contact your local
telecom service supplier.
Please note:
Dialling using the directory (page 13), the last
number redial list (page 13), the call history
(page 14) or the call-by-call info services list
(page 14) saves you from having to re-enter
numbers and network provider prefixes ("call-
by-call numbers").

13
Using the directory and lists
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / directory.fm / 5.9.08
Version 4, 16.09.2005
Using the directory and lists
The options are:
uDirectory
uLast number redial list
uCall history
uCall-by-call list
Directory
In the directory you can store up to 50
phone numbers and corresponding
names.
¤In idle status, open the directory by
pressing the fkey.
¤Press qto look for entries.
Length of entries
Number: max. 24 digits
Name: max. 15 characters
Saving a number in the directory
¤Press fand éto open the directory
menu.
¤Select ADDENTRY with qand confirm
with ê.
¤Enter the name of the contact and con-
firm with ê.
¤Enter the phone number and confirm
with ê.
Dialling with the directory
¤Press fand select an entry with q.
¤Press cto dial.
Editing an entry in the directory
¤Press fand éto open the directory
menu.
¤Select EDITENTRYwith qand confirm
with ê.
¤Select an entry and confirm with ê.
¤Edit the name and confirm with ê.
¤Edit the phone number and confirm
with ê.
Deleting an entry in the directory
¤Press fand éto open the directory
menu.
¤Select DELETE ENTRY with qand con-
firm with ê.
¤Select an entry and confirm with ê.
¤Confirm the message DELETE ? /
DELETEALL?with ê (on base) / ì (on
handset).
The entry is deleted, DELETED is displayed.
Please delete expired entries to keep up
the directory storage.
Deleting the complete directory
¤Press fand éto open the directory
menu.
¤Select DELETE LIST with qand con-
firm with ê.
¤Confirm the message DELETE ? /
DELETEALL?with ê (on base) / ì (on
handset).
The directory is deleted, DELETED is dis-
played.
Last number redial list
The last number redial list contains the ten
numbers last dialled.
¤Press ìand select a number with q.
¤Press cto dial.

14
Using the directory and lists
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / directory.fm / 5.9.08
Version 4, 16.09.2005
Call history
¤Press t(Handset)/ë(Basestation)
and select a number with q.
¤Press cto dial.
Precondition: Calling Line Identification
(page 12) is applied and there are stored
calls.
Setting the type of list
Depending on the type of list set, all num-
bers of the last 30 incoming calls or just
the missed calls are saved.
¤Press éto open the menu.
¤Select PERSONALSET. with qand con-
firm with ê.
¤Select CALL LOGS and confirm with ê.
¤Select ALL CALLS or MISSED CALL and
confirm with ê.
The calls list entries are retained when you
change the list type.
Call-by-call list
In the call-by-call list, you can store net-
work provider prefixes ("call-by-call num-
bers").
Store a call-by-call number
¤Press the Ckey twice.
¤Enter the provider’s name and confirm
with ê.
¤Enter the provider’s number and con-
firm with ê.
The method for entering the call-by-call
number below is for your reference since
it may be different for various cards.
¤Enter the call-by-call number, e.g.
17910.
¤Insert a pause by pressing the # key
twice if necesssary.
Use the call-by-call dialling
¤Enter a long distance number and then
press C.
Or:
¤Select a number from the directory or
redial list and then press C.
Or:
¤Press c or d, then press Cand
then enter the long distance number.

15
Using several handsets
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / handset.fm / 5.9.08
Version 4, 16.09.2005
Using several handsets
Making internal calls/Intercom
Internal calls to other handsets registered
to the same base are free.
Calling handset
¤Press ç.
¤Enter the number of the handset.
Or press Qto call the base.
Or press the star key *to call all
handsets.
¤To answer the call with the handset or
base, press cor d.
Ending a call
¤Press the end call akey.
Transferring a call to another handset
You can transfer an external call to
another handset (connect).
¤During the external call, press ç.
¤Enter the handset number you want to
transfer.
When the internal participant answers:
¤If necessary announce the external call.
¤Press the end call key a.
The external call is transferred to the other
handset.
Internal consultation calls
When you are speaking to an external
participant, you can call an internal par-
ticipant at the same time for consultation.
¤During the external call, press ç.
¤Enter the handset number you want to
consult with.
You are connected with the internal par-
ticipant. To return to held call press ç. If
an internal participant presses the end
call key a, the other handset remains
connected to the external participant.
Conference calls
When you are speaking to an external
participant, an internal caller can listen in
on this call and take part in a conference
call.
Activate/Deactivate conference call
¤Press é.
¤Select CONFERENCE with qand con-
firm with ê.
¤Select ON/OFFto activate/deactivate the
function and confirm with ê.
Starting a conference call
The CONFERENCE function must be acti-
vated as described above.
The line is engaged with an external call.
Your display will show information to that
effect.
¤Press cor dto start a conference
call.
Ending a conference call
¤Press the end call key a.
If an internal participant presses the end
call key a, the other handset remains
connected to the external participant.

16
Setting the handset
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / setting.fm / 5.9.08
Version 4, 16.09.2005
Setting the handset
Your handset is preconfigured, but you
can change the settings to suit your indi-
vidual requirements.
Changing audio settings
Changing the ringer volume
¤Press é.
¤Select AUDIOSETTING with qand con-
firm with ê.
¤Select RINGER VOLUME and confirm
with ê.
¤Choose between five volumes: HIGH,
MEDIUM, LOW, OFF and the ASCENDING
ring (volume increases with each ring)
and confirm with ê.
Changing the melody
¤Press é.
¤Select AUDIOSETTING with qand con-
firm with ê.
¤Select RINGER MELODY and confirm
with ê.
¤Choose between various ringer melody
and confirm with ê.
Setting the contrast
¤Press é.
¤Select PERSONALSET. with qand con-
firm with ê.
¤Select CONTRAST and confirm with ê.
¤Choose between three levels (LEVEL 1,
LEVEL2, LEVEL 3) and confirm with ê.
Setting the key tone
¤Press é.
¤Select PERSONALSET. with qand con-
firm with ê.
¤Select KEY BEEP and confirm with ê.
¤Select ON/OFFto activate/deactivate the
key tone and confirm with ê.
Changing the display language
You can view the display texts in different
languages.
¤Press é.
¤Select PERSONALSET. with qand con-
firm with ê.
¤Select LANGUAGE and confirm with ê.
¤Select ENGLISH/FRENCH to change the
language and confirm with ê.
Restoring the handset to the
factory settings
You can reset any individual settings and
changes that you have made. This will not
affect entries in the directory or the hand-
set's registration to the base.
¤Press é.
¤Select ADVANCEDSET.with qand con-
firm with ê.
¤Select HANDSET RESET and confirm
with ê.
¤Select YES to reset the handset or NOto
cancel the restoring process and con-
firm with ê.

17
Setting the base
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / setting.fm / 5.9.08
Version 4, 16.09.2005
Setting the base
The base settings are carried out using a
registered Gigaset C67H handset.
Setting the date and time
You do not need to set time and date on
base again, if you have set on handset (see
page 9).
Changing audio settings
Changing the ringer volume
¤Press é.
¤Select AUDIOSETTING with qand con-
firm with ê.
¤Select RINGER VOLUME and confirm
with ê.
¤Choose between four volumes (HIGH,
MEDIUM, LOW, OFF) and confirm with
ê.
Changing the melody
¤Press é.
¤Select AUDIOSETTING with qand con-
firm with ê.
¤Select RINGER MELODY and confirm
with ê.
¤Choose between various ringer melody
(by pressing 0 to 9) and confirm with
ê.
Setting the key tone
¤Press é.
¤Select KEY BEEP with qand confirm
with ê.
¤Select ON/OFFto activate/deactivate the
key tone and confirm with ê.
Setting the contrast
¤Press é.
¤Select CONTRAST with qand confirm
with ê.
¤Choose between three levels (LEVEL 1,
LEVEL2, LEVEL 3) and confirm with ê.
Restoring the base to the
factory settings
When the settings are restored, the hand-
sets are still registered.
¤Press é.
¤Select BASE RESET with qand con-
firm with ê.
¤Select YES to reset the base or press NO
to cancel the restoring process and con-
firm with ê.

18
Connecting the base to PABX
Gigaset C670 (Paganini) / MEA eng / A31008-M1763-A601-3-3T19 / pabx.fm / 5.9.08
Version 4, 16.09.2005
Connecting the base
to PABX
The following settings are only necessary
when your PABX requires them; see the
PABX user guide.
Dialling modes and flash time
Changing the dialling mode
¤Press é.
¤Select TONE/PULSE with qand con-
firm with ê.
¤Select the dialling mode TONE (Touch
tone dialling (DTMF)) or PULSE (Dial
pulsing (DP)) and confirm with ê.
Setting flash time
Your phone is preset at the factory for
operation on the main connection. For
operation on a PABX, you may have to
change this value. Please refer to the user
guide for your PABX.
¤Press é.
¤Select FLASHTIME with qand confirm
with ê.
¤Select the flash time in ms (100, 300,
600) and confirm with ê.
Saving an access code
(PABX prefix)
Precondition: You may have to enter an
access code for external calls in your PABX,
e.g. "9". This number can be automatically
prefixed if you set the prefix.
¤Press é.
¤Select PABX PREFIX with qand con-
firm with ê.
¤Enter or change the access code, at
least two digits and confirm with ê.
Network Setting
¤Press é.
¤Select NETWORK with qand confirm
with ê.
¤Select PUBLIC NET. or PRIVATE NET. and
confirm with ê.
Dial an external number
The access code (PABX PREFIX) is automat-
ically prefixed, if all preconditions are ful-
filled:
uThe NETWORK is set to PRIVATE NET. .
uThe access code (PABX PREFIX) is set.
uYou enter the phone number before
pressing cor d.
Example:
¤Set NETWORK to PRIVATE NET..
¤Set PABX PREFIX number to 9.
¤Enter 235.
¤Press cor d.
The number dialled out is 9P12345.
Caution:
The access code (PABX PREFIX) is not
prefixed if you press cor dbefore
entering number.