Siemens SIMATIC HMI Mobile Panel 277 RO User manual

Mobile Panel 277 RO
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC HMI
HMI device
Mobile Panel 277 RO
Operating Instructions
10/2015
A5E36824256
-AA
Preface
Overview
1
Safety instructions and
general notes
2
Planning application
3
Mounting and connecting
4
Operator controls and
displays
5
Configuring the operating
system
6
Using RemoteOperate Client
7
Backing up and restoring
data
8
Maintenance and care
9
Technical specifications
10
Appendix
A
Abbreviations
B

Siemens AG
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
GERMANY
A5E36824256-AA
Ⓟ
11/2015 Subject to change
Copyright © Siemens AG 2015.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA 3
Preface
Purpose of the operating instructions
These operating instructions provide information based on the requirements defined by DIN
EN 62079 for mechanical engineering documentation. This information relates to the place of
use, transport, storage, mounting, use and maintenance.
These operating instructions are intended for the following user groups:
●Operators
Operators operate and monitor the system during the process control phase. The
following chapters are relevant to the operator:
–Overview
–Operator controls and displays
–Configuring the operating system
–Using RemoteOperate Client
–Backing up and restoring data
●Commissioning engineers
Commissioning engineers integrate the HMI device into the system and ensure the
operating capability of the device for the process control phase.
The entire set of operating instructions is relevant to commissioning engineers in
principle.
Depending on the use of the HMI device, however, certain chapters may not be relevant
to them, e.g., the chapter on "Maintenance and care".
●Service technicians
Service technicians rectify faults that occur during the process control phase.
The entire set of operating instructions is relevant to service technicians in principle.
Depending on the use of the HMI device, however, certain chapters may not be relevant
to them, e.g., the chapter on "Maintenance and care".
●Maintenance technicians
Maintenance technicians carry out regular maintenance work during the process control
phase.
The chapter on "Maintenance and care" is relevant to maintenance technicians.
All user groups must pay special attention to the chapter on "Safety instructions and general
notes".
Basic knowledge required
General knowledge of automation technology and process communication is needed to
understand the operating instructions.
It is also assumed that those using the manual have experience in using personal computers
and knowledge of Microsoft operating systems.
Scope of the operating instructions
These operating instructions apply to the SIMATIC Mobile Panel 277 RO HMI device in
combination with the RemoteOperate V4 software.

Preface
Mobile Panel 277 RO
4Operating Instructions, 10/2015, A5E36824256-AA
Associated documents
Additional information on the RemoteOperate V4 software is available in the
RemoteOperate V4 programming manual.
Pictures
The HMI device is sometimes shown in the form of photographs in these operating
instructions. The photographs of the HMI device may differ slightly from the factory state of
the HMI device.
Conventions
The following designations for hardware and software are used in this manual:
Designation
Meaning
RemoteOperate Server
The RemoteOperate Server software package
RemoteOperate Client The RemoteOperate Client software package
RemoteOperate
The RemoteOperate software package (Server and Client)
Server
A system on which the RemoteOperate Server software is installed or runs.
Client, HMI device
A system on which the RemoteOperate Client software package runs.
The following text notation will facilitate reading this manual:
Notation
Scope
"Add figure" •Terminology that appears in the user interface, for example dialog
names and buttons.
•Required inputs, for example, an IP address.
•Path information
"File > Edit" Operating sequences, for example, menu commands, shortcut menu
commands.
<F1>, <Alt + P>
Keyboard actions
Please observe notes labeled as follows:
Note
Notes containing important information about the product and its use or a specific section of
the documentation to which you should pay particular attention.
Registered trademarks
●HMI®
●SIMATIC®
●SIMATIC HMI®
Third parties using for their own purposes any other names in this document which refer to
trademarks might infringe upon the rights of the trademark owners.

Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA 5
Table of contents
Preface ...................................................................................................................................................... 3
1 Overview.................................................................................................................................................... 9
1.1 Product overview ......................................................................................................................9
1.2 Design of the HMI device..........................................................................................................9
1.3 Accessories.............................................................................................................................12
1.3.1 Connecting cable ....................................................................................................................12
1.3.2 Connection box.......................................................................................................................13
1.3.3 Rechargeable buffer battery ...................................................................................................14
1.3.4 Wall-mounting bracket ............................................................................................................15
1.3.5 PC/PPI cable...........................................................................................................................15
1.3.6 USB/PPI cable ........................................................................................................................16
1.3.7 Protective foil ..........................................................................................................................16
1.3.8 Touch pens .............................................................................................................................16
1.3.9 Memory card...........................................................................................................................16
1.4 The HMI device in the operating process ...............................................................................17
2 Safety instructions and general notes...................................................................................................... 19
2.1 General safety instructions .....................................................................................................19
2.2 Standards, certificates and approvals.....................................................................................22
2.3 Operating safety......................................................................................................................23
2.4 Voltage supply ........................................................................................................................24
2.5 Notes about usage..................................................................................................................24
2.6 Risk assessment.....................................................................................................................25
2.7 Enabling button.......................................................................................................................26
2.8 STOP button ...........................................................................................................................28
2.9 Electromagnetic compatibility .................................................................................................29
2.10 Transport and storage conditions ...........................................................................................31
3 Planning application................................................................................................................................. 33
3.1 Notes about usage..................................................................................................................33
3.2 Mounting positions and type of fixation...................................................................................35
3.3 Preparing for mounting ...........................................................................................................36
3.4 Information on insulation tests, protection class and degree of protection.............................37
3.5 Rated voltages........................................................................................................................38

Table of contents
Mobile Panel 277 RO
6Operating Instructions, 10/2015, A5E36824256-AA
4 Mounting and connecting......................................................................................................................... 39
4.1 Checking the package contents............................................................................................. 39
4.2 Mounting the connection box and wall-mounting bracket...................................................... 39
4.3 Electrical installation .............................................................................................................. 41
4.4 Connecting the connection box.............................................................................................. 41
4.4.1 Overview ................................................................................................................................ 41
4.4.2 Opening and closing the connection box............................................................................... 42
4.4.3 Stripping the insulation of cables ........................................................................................... 44
4.4.4 Connecting the equipotential bonding circuit......................................................................... 45
4.4.5 Connecting the server............................................................................................................ 47
4.4.6 Connecting the power supply................................................................................................. 47
4.4.7 Connecting the connecting cable........................................................................................... 49
4.5 Connecting the Mobile Panel 277 RO ................................................................................... 51
4.5.1 Connecting the HMI device.................................................................................................... 51
4.5.2 Opening and closing the terminal compartment .................................................................... 51
4.5.3 Mobile Panel 277 RO ports.................................................................................................... 53
4.5.4 Connecting a PC.................................................................................................................... 56
4.6 Switching on and testing the HMI device............................................................................... 57
5 Operator controls and displays ................................................................................................................ 59
5.1 Operator controls and displays on the Mobile Panel 277 RO................................................ 59
5.1.1 Overview ................................................................................................................................ 59
5.1.2 Enabling button ...................................................................................................................... 60
5.1.3 STOP button .......................................................................................................................... 62
5.1.3.1 Overview ................................................................................................................................ 62
5.1.3.2 Safety functions of the STOP button ..................................................................................... 64
5.1.3.3 STOP button on the connection box Plus.............................................................................. 66
5.1.4 Using memory cards .............................................................................................................. 67
5.2 Changing the touch pen......................................................................................................... 68
5.3 Holding the mobile panel and fixing it to the wall................................................................... 69
5.4 Displays on the connection box PN ....................................................................................... 71
6 Configuring the operating system ............................................................................................................ 73
6.1 Loader.................................................................................................................................... 73
6.2 Control Panel ......................................................................................................................... 75
6.2.1 Overview ................................................................................................................................ 75
6.2.2 Reference............................................................................................................................... 76
6.2.3 Operating the Control Panel .................................................................................................. 77
6.3 Changing settings for operation............................................................................................. 79
6.3.1 Configuring the screen keyboard........................................................................................... 79
6.3.2 Setting the character repeat rate of the screen keyboard ..................................................... 80
6.3.3 Setting the double-click.......................................................................................................... 81
6.3.4 Calibrating the touch screen .................................................................................................. 82
6.4 Changing password protection .............................................................................................. 84

Table of contents
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA 7
6.5 Changing HMI device settings ................................................................................................85
6.5.1 Setting the date and time........................................................................................................85
6.5.2 Backup registry information ....................................................................................................87
6.5.3 Changing monitor settings ......................................................................................................88
6.5.4 Setting the screen saver .........................................................................................................89
6.5.5 Restarting the HMI device ......................................................................................................91
6.5.6 Displaying information about the HMI device .........................................................................92
6.5.7 Displaying system properties..................................................................................................93
6.6 Setting the delay time .............................................................................................................95
6.7 Communication settings .........................................................................................................96
6.7.1 Configuring the data channel..................................................................................................96
6.7.2 Checking the PROFINET IO settings .....................................................................................98
6.8 Configuring network operation................................................................................................99
6.8.1 Setting the device name of the HMI device............................................................................99
6.8.2 Changing the network configuration .....................................................................................100
6.8.3 Changing the logon data.......................................................................................................101
6.9 Backup and restore with the memory card ...........................................................................102
6.9.1 Backup to the memory card..................................................................................................102
6.9.2 Restore from the memory card.............................................................................................104
6.10 Display rechargeable battery charge level ...........................................................................106
7 Using RemoteOperate Client................................................................................................................. 107
7.1 Creating/editing a server selection list..................................................................................107
7.2 Connecting a client ...............................................................................................................110
7.3 Changing the server..............................................................................................................114
7.4 Start client .............................................................................................................................115
7.5 Closing the RemoteOperate Client.......................................................................................115
7.6 Example: Assigning operator authorization ..........................................................................117
8 Backing up and restoring data ............................................................................................................... 121
9 Maintenance and care ........................................................................................................................... 123
9.1 Maintenance and care ..........................................................................................................123
9.2 Update HMI device image ....................................................................................................124
9.3 Spare parts and repairs ........................................................................................................125

Table of contents
Mobile Panel 277 RO
8Operating Instructions, 10/2015, A5E36824256-AA
10 Technical specifications......................................................................................................................... 127
10.1 Dimension drawings............................................................................................................. 127
10.1.1 Mobile Panel 277 RO........................................................................................................... 127
10.1.2 Wall-mounting bracket ......................................................................................................... 129
10.1.3 Connection box PN Plus...................................................................................................... 130
10.2 Specifications....................................................................................................................... 131
10.2.1 Mobile Panel 277 RO........................................................................................................... 131
10.2.2 Rechargeable buffer battery ................................................................................................ 132
10.2.3 Safety characteristics........................................................................................................... 133
10.2.4 Connection box PN Plus...................................................................................................... 134
10.3 Mobile Panel 277 RO interface assignment ........................................................................ 135
10.3.1 RS 485 (IF 2)........................................................................................................................ 135
10.3.2 USB...................................................................................................................................... 135
10.3.3 RJ45 for connecting cable PN ............................................................................................. 136
10.3.4 Post connector for connecting cable PN.............................................................................. 136
10.4 Connection box PN Plus interface assignment.................................................................... 137
10.5 Wiring Examples for Enabling Switch and STOP Button..................................................... 142
A Appendix................................................................................................................................................ 145
A.1 Service and support............................................................................................................. 145
A.2 ESD guideline ...................................................................................................................... 146
B Abbreviations......................................................................................................................................... 149
B.1 Abbreviations ....................................................................................................................... 149
Glossary ................................................................................................................................................ 151
Index...................................................................................................................................................... 153

Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA 9
Overview
1
1.1
Product overview
Expanded application options – with Mobile Panel 277 RO
SIMATIC Mobile Panels offer the option of making safety functions available on a mobile
basis at any point of a machine or plant.
The Mobile Panel 277 RO enables you to use text or graphically based projects even more
efficiently for simple and medium-complexity control and monitoring tasks on machines and
plants.
Benefits of the Mobile Panel 277 RO include its short commissioning times, large user
memory and excellent performance.
In addition, the Mobile Panel 277 RO comes with the following features:
●Ethernet port
●10" TFT screen with 64k colors
1.2
Design of the HMI device
The SIMATIC Mobile Panel 277 RO HMI device and an accessory kit are included in
delivery.

Overview
1.2 Design of the HMI device
Mobile Panel 277 RO
10 Operating Instructions, 10/2015, A5E36824256-AA
Front view of the Mobile Panel 277 RO
①
STOP button
②
Display with touch screen
Side view of the Mobile Panel 277 RO
①
Impact guards
②
Enabling buttons, positioned on both sides of the Mobile Panel 277 RO
③
Handle

Overview
1.2 Design of the HMI device
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA 11
Rear view of the Mobile Panel 277 RO
①
Rating label
②
Pen holder with touch pen
③
Handle
④
Connection compartment cover
⑤
USB port and plugs
⑥
Cable inlet
A touch pen is attached to the back of the HMI device.
Accessory kit
The accessory kit of the device includes:
●The "SIMATIC RemoteOperate - Application & Documentation" CD. The following
software and documents are included on the CD:
–The HMI device image with the operating system and the RemoteOperate Client
software
–These operating instructions and the RemoteOperate V4 programming manual
–The ProSave software package for transferring the HMI device image to the Mobile
Panel 277 RO
–The ProSave add-on, which is required to select the Mobile Panel 277 RO in ProSave
–The RemoteOperate Server software
–The "Readme.rtf" file in the main directory of the CD with additional information
●A touch pen for operating the touch screen.
Additional documents may be enclosed with the accessory kit.

Overview
1.3 Accessories
Mobile Panel 277 RO
12 Operating Instructions, 10/2015, A5E36824256-AA
1.3
Accessories
1.3.1
Connecting cable
The Mobile Panel 277 RO is compatible with the connecting cable PN:
①
Metallic push-pull circular connector
②
Strain relief and antikink device for the connecting cable
③
RJ45 connector
④
Plug connector, 12-pin
Connect the connecting cable to the Mobile Panel 277 RO so that it is not detachable. The
connection to the connection box PN Plus is achieved by means of a detachable connector.
The connecting cable PN is an industrial cable and is therefore resistant to many solvents
and lubricants. The flexural strength of the connecting cable is geared to the actual usage
conditions.
Note
Degree of protection
When inserted, the circular connector guarantees IP65 degree of protection..
Ordering information
The connecting cable PN is not included with the HMI device. The connecting cable PN is
available in various lengths under the following article numbers:
Length of the connecting cable
Article number
5 m
6XV1440-4BH50
10 m
6XV1440-4BN10
25 m
6XV1440-4BN25

Overview
1.3 Accessories
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA 13
1.3.2
Connection box
The Mobile Panel 277 RO is compatible with the connection box PN Plus:
①
Screwed joint for process data line
②
LEDs
③
Threaded assembly for power supply cable
④
Threaded assembly for cable with supplementary Stop and enabling button signals and for
PLC-accompanying signals
⑤
Connecting socket for the connecting cable - covered with dummy cap
A mechanical foolproofing device means that only the connecting cable PN can be
connected to the connection box PN Plus.
Note
Degree of protection
Degree of protection IP65 is guaranteed for the
connection box when the
Mobile
Panel 277 RO is connected or when a dummy cap is inserted.
Note
Recovery time
Wait for approximately one second after you have removed the connecting cable from the
c
onnection box before you plug the connecting cable back in.
After power failures lasting less than one second the connecting cable has to be
disconnected.
Ordering information
The connection box PN Plus is not included with the HMI device. The connection box PN
Plus is available under article number 6AV6671-5AE11-0AX0.

Overview
1.3 Accessories
Mobile Panel 277 RO
14 Operating Instructions, 10/2015, A5E36824256-AA
Division of the system into zones
You can divide a system into various zones or functional areas by using numerous
connection boxes. You can also set up the safety functions zone-dependently. This means
that both enabling buttons and STOP buttons can act in only one particular zone and not in
others.
1.3.3
Rechargeable buffer battery
The rechargeable buffer battery avoids the need to restart the Mobile Panel when changing
between different connection boxes.
The maximum buffer time is 10 minutes. The rechargeable battery is able to bridge the buffer
time 5 times without recharging. During the buffer time, the backlight of the display is
switched off.
When the mobile panel is connected to a connection box, the rechargeable battery is
charged automatically.
Note
Recharging and discharging the rechargeable battery
In the following cases, there is a risk of fire and, in extreme
cases, explosion!
•
Incorrect charging and discharging of the rechargeable battery
•
Reverse polarity
•
Short-circuit
The rechargeable battery may only be recharged in the mobile
panel.
Note
The HMI device may supply the same system alarms as it would do in the event of a
communication interrupt when reconnecting the HMI device to another connection box.
Safety instructions
The rechargeable battery is a Li-ion rechargeable battery. The following safety notes apply to
these rechargeable batteries:
●Do not crush.
●Do not expose to heat and do not burn.
●Do not short-circuit.
●Do not take apart.
●Do not immerse in liquid – the battery might crack or burst.
Ordering information
The rechargeable buffer battery is not included with the HMI device.
Note
You may only use the battery option package as of product version 02. The product version
is available on the battery.
The rechargeable battery is available under the article number 6AV6671-5AD00-0AX0.

Overview
1.3 Accessories
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA 15
1.3.4
Wall-mounting bracket
The wall-mounting bracket provides a safe hold for the Mobile Panel 277 when used in
stationary mode.
①
Hook for the grip on the HMI device
②
Screw flange
The wall-mounting bracket is not included with the HMI device. The wall-mounting bracket is
available under the article number 6AV6574-1AF04-4AA0.
1.3.5
PC/PPI cable
You need the cable to update the HMI device image via the RS 232 serial interface of the
configuration PC. You can also use the cable for data transfer. Connect the PC/PPI cable to
the RS 485 port of the HMI device.
Note
If the conne
ction fails during the operating system update, set the system to a lower bit rate.
If you use a higher bit rate, you must use the PC/PPI cable version 3 or higher. The version
is printed on the cable: For example, "E
-Stand 3" corresponds to version 3.
The PC/PPI cable is not included with the HMI device. The cable is available under article
number 6ES7 901-3CB30-0XA0.

Overview
1.3 Accessories
Mobile Panel 277 RO
16 Operating Instructions, 10/2015, A5E36824256-AA
1.3.6
USB/PPI cable
You need the cable to update the operating system by resetting to factory settings via the
USB port of the configuration PC. Connect the PC/PPI cable to the RS 485 port of the HMI
device.
Note
Use a USB/PPI cable, version
5 or higher. The version is printed on the cable: For example,
"E
-Stand 5" corresponds to version 5.
The USB/PPI cable is not included with the HMI device. The cable is available under article
number 6ES7 901-3DB30-0XA0.
1.3.7
Protective foil
The protective foil prevents the touch screen from being scratched or soiled.
The protective foil kit is not included with the HMI device. The protective foil kit contains 10
protective foils and has the following article numbers:
●6AV6671-5BC00-0AX0 for Mobile Panel 277 8"
●6AV6645-7AB15-0AS0 for Mobile Panel 277 10"
1.3.8
Touch pens
The touch pens make it easier to operate the touch screen.
The touch pen set is not included with the HMI device. The touch pen set contains 5 pens
and is available under article number 6AV6645-7AB14-0AS0.
1.3.9
Memory card
You can use a memory card to back up data from the HMI device and to copy data onto the
HMI device. Only use the SD memory cards or multimedia cards tested and released by
Siemens.
A memory card is not included with the HMI device. The memory card can be ordered using
the Siemens online catalog. For additional information, refer to the Internet at Industry Mall
(https://mall.industry.siemens.com).

Overview
1.4 The HMI device in the operating process
Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA 17
1.4
The HMI device in the operating process
The HMI device is part of the operating process. The operating process is marked by three-
way communication between the HMI device, server and PLC. The following figure shows an
exemplary system design.
The HMI device is used for monitoring or controlling the operating process. The PLC in turn
supplies the server with the results of the operating process, which are displayed on the HMI
device.

Overview
1.4 The HMI device in the operating process
Mobile Panel 277 RO
18 Operating Instructions, 10/2015, A5E36824256-AA
The RemoteOperate software package
Communication between the HMI device and the server is handled using the
RemoteOperate software package.
Using RemoteOperate you can monitor or operate a server from a client. The range of
operations covers all the functions of the server.
The RemoteOperate software package comprises two components:
●The RemoteOperate Server software
●The RemoteOperate Client software
A detailed description of the RemoteOperate software can be found in the "RemoteOperate
V4" programming manual.

Mobile Panel 277 RO
Operating Instructions, 10/2015, A5E36824256-AA 19
Safety instructions and general notes
2
2.1
General safety instructions
Safety regulations
WARNING
Personal injury or material damage due to non-compliance with safety regulations
Strictly observe all instructions in these operating instructions at all times. Otherwise,
hazardous situations can arise or the safety mechanisms in the HMI device can be
rendered ineffective.
Observe the safety and accident prevention instructions applicable to your application in
addition to the safety instructions given in this manual.
WARNING
Operational safety in the plant
The configuration engineer for a machine or system PLC must take precautions so that an
interrupted program can be restarted normally after voltage dips or power failures.
Dangerous operating conditions must not occur, even temporarily.
If faults in the system can cause bodily injury or significant property damage, additional
measures must be taken outside of the system. These measures must also ensure safe
operating conditions in the system in the event of a fault.
The system's configuration engineer must take precautions to ensure that memory changes
that could lead to a dangerous situation can only be undertaken by authorized persons.
The STOP button and enabling button must be checked periodically for proper functioning.

Safety instructions and general notes
2.1 General safety instructions
Mobile Panel 277 RO
20 Operating Instructions, 10/2015, A5E36824256-AA
WARNING
Operational reliability of the HMI device
After a hard impact to the HMI device, check the safety-relevant features for functional
capability, for example in the event that the HMI device is dropped.
Manual actions performed with the HMI device may only occur in conjunction with the
enabling buttons and at reduced velocity.
During operation, note:
•The hazardous location must be visible from the operating position taken by the
personnel.
•Ensure that current operation is only possible by means of the HMI device and not from
any other point on the system.
Proper use
WARNING
Potential personal injury or material damage due to non-compliance with machine
regulations
Commissioning of the HMI device is forbidden until it has been absolutely ensured that the
machine in which the HMI device is to be installed complies with Directive 98/37/EC or
Directive 2006/42/EC as of 29 December 2009.
Note
All safety functions of the HMI device have a 2
-channel configuration and can achieve PL d
in accordance with EN
ISO 13849-1:2008/AC:2009.
High frequency radiation
Note
Observe immunity to RF radiation
The device has
increased immunity to RF radiation according to the specifications on
electromagnetic compatibility in the technical specifications.
Radiation exposure in excess of the specified immunity limits can impair device functions
and result in malfunctions and th
erefore injuries or damages.
Read the information on immunity to RF radiation in the technical specifications.