Siemens 7SR45 Argus User manual

Reyrolle
Operating
7SR45
V03.00
Manual
C53000-B7040-C101-1
Preface
Open Source Software
Table of Contents
First Steps 1
Installing the Device 2
Handling of the Device 3
Using the Relay Fascia 4
Using Reydisp Evolution 5
In Service Operation 6
Commissioning 7
Device Maintenance 8
Security Settings 9
Appendix A
Index

i
i
NOTE
For your own safety, observe the warnings and safety instructions contained in this document, if available.
Disclaimer of Liability
Subject to changes and errors. The information given in
this document only contains general descriptions and/or
performance features which may not always specifically
reflect those described, or which may undergo modifica-
tion in the course of further development of the products.
The requested performance features are binding only when
they are expressly agreed upon in the concluded contract.
Document version: C53000-B7040-C101-1.0
Edition: 08.2020
Version of the product described: V03.00
Copyright
Copyright © Siemens 2020. All rights reserved.
The disclosure, duplication, distribution and editing of this
document, or utilization and communication of the content
are not permitted, unless authorized in writing. All rights,
including rights created by patent grant or registration of a
utility model or a design, are reserved.

Preface
Purpose of the Manual
This manual describes the operation of the device and gives information about safety, commissioning, and
operation as well as checks and tests.
Target Audience
This manual is mainly intended for protection system engineers, commissioning engineers, persons entrusted
with the setting, testing and maintenance of automation, selective protection and control equipment, and
operational crew in electrical installations and power plants.
Scope
This manual applies to the Reyrolle 7SR45 device family.
Further Documentation
[dw_7SR45_furtherdocumentation_operatingmanual, 1, en_US]
•Device manual
The device manual describes the functions and applications of the Reyrolle 7SR45 device. The printed
manual for the device has the same informational structure.
•Hardware manual
The hardware manual describes the hardware building blocks and device combinations of the Reyrolle
7SR45 device family.
Reyrolle, Operating, Manual 3
C53000-B7040-C101-1, Edition 08.2020

•Operating manual
The operating manual describes the basic principles and procedures for operating and installing the
devices of the Reyrolle 7SR45 range.
•Communication protocol manual
The communication protocol manual contains a description of the protocols for communication within
the Reyrolle 7SR45 device family and to higher-level network control centers.
•Engineering Guide
The engineering guide describes the essential steps when engineering with Reydisp Evolution. In addi-
tion, the engineering guide shows you how to load a planned configuration to a Reyrolle 7SR45 device
and update the functionality of the Reyrolle 7SR45 device.
•Reyrolle 7SR45 catalog
The Reyrolle 7SR45 catalog describes the system features and the devices of Reyrolle 7SR45.
•Selection guide for Reyrolle and SIPROTEC
The selection guide offers an overview of the device series of the Siemens protection devices, and a
device selection table.
Additional Support
For questions about the system, contact your Siemens sales partner.
Customer Support Center
Our Customer Support Center provides a 24-hour service.
Siemens AG
Customer Support Center
Humboldtstrasse 59
90459 Nuremberg
Germany
E-mail: [email protected]
Training Courses
Inquiries regarding individual training courses should be addressed to our Training Center:
Siemens AG Phone: [phone]
Siemens Power Academy TD Fax: [phone]
Humboldtstrasse 59 E-mail: [email protected]
90459 Nuremberg Internet: www.siemens.com/poweracademy
Germany
Notes on Safety
This document is not a complete index of all safety measures required for operation of the equipment (module
or device). However, it comprises important information that must be followed for personal safety, as well as
to avoid material damage. Information is highlighted and illustrated as follows according to the degree of
danger:
!
DANGER
DANGER means that death or severe injury will result if the measures specified are not taken.
²Comply with all instructions, in order to avoid death or severe injuries.
Preface
4 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020

!
WARNING
WARNING means that death or severe injury may result if the measures specified are not taken.
²Comply with all instructions, in order to avoid death or severe injuries.
!
CAUTION
CAUTION means that medium-severe or slight injuries can occur if the specified measures are not taken.
²Comply with all instructions, in order to avoid moderate or minor injuries.
NOTICE
NOTICE means that property damage can result if the measures specified are not taken.
²Comply with all instructions, in order to avoid property damage.
i
i
NOTE
Important information about the product, product handling or a certain section of the documentation
which must be given attention.
Preface
Reyrolle, Operating, Manual 5
C53000-B7040-C101-1, Edition 08.2020

6 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020

Open Source Software
The product contains, among other things, Open Source Software developed by third parties. The Open
Source Software used in the product and the license agreements concerning this software can be found in the
Readme_OSS. These Open Source Software files are protected by copyright. Your compliance with those
license conditions will entitle you to use the Open Source Software as foreseen in the relevant license. In the
event of conflicts between Siemens license conditions and the Open Source Software license conditions, the
Open Source Software conditions shall prevail with respect to the Open Source Software portions of the soft-
ware. The Open Source Software is licensed royalty-free. Insofar as the applicable Open Source Software
License Conditions provide for it you can order the source code of the Open Source Software from your
Siemens sales contact – against payment of the shipping and handling charges – for a period of at least 3
years after purchase of the product. We are liable for the product including the Open Source Software
contained in it pursuant to the license conditions applicable to the product. Any liability for the Open Source
Software beyond the program flow intended for the product is explicitly excluded. Furthermore any liability
for defects resulting from modifications to the Open Source Software by you or third parties is excluded. We
do not provide any technical support for the product if it has been modified.
The ReadmeOSS documents for the product can be found here: www.siemens.com/reyrolle
Reyrolle, Operating, Manual 7
C53000-B7040-C101-1, Edition 08.2020

8 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020

Table of Contents
Preface..........................................................................................................................................................3
Open Source Software..................................................................................................................................7
1 First Steps................................................................................................................................................... 13
1.1 Unpacking, Repacking, Returning, Transporting, and Storing............................................. 14
1.2 Incoming Inspection .........................................................................................................16
1.3 Electrical Inspection ......................................................................................................... 17
2 Installing the Device...................................................................................................................................19
2.1 Drilling Patterns and Device Dimensions............................................................................ 20
2.2 Mounting Instructions.......................................................................................................23
2.3 Installing Devices.............................................................................................................. 24
2.4 Earthing and Connecting Devices ..................................................................................... 25
2.5 Terminal Lugs Specification...............................................................................................26
2.6 Environmental Protection Hints......................................................................................... 27
3 Handling of the Device............................................................................................................................... 29
3.1 Battery Replacement......................................................................................................... 30
3.2 Installing Transparent Front Cover.....................................................................................33
3.3 Installing Surface Mounting Bracket.................................................................................. 37
3.4 Post Installation and Commissioning................................................................................. 40
3.5 Replacement of the Device ............................................................................................... 44
4 Using the Relay Fascia................................................................................................................................ 45
4.1 General.............................................................................................................................46
4.2 Home Screen ................................................................................................................... 47
4.3 Software Version Menu .................................................................................................... 48
4.4 Overview of Operator Elements and Display Elements....................................................... 49
4.5 Structure of the Menu....................................................................................................... 52
4.5.1 Relay Menu ................................................................................................................ 52
4.5.2 User Interface Operation .............................................................................................52
4.5.3 Setting Mode ..............................................................................................................53
4.5.4 Instrument Mode ........................................................................................................53
4.5.5 Fault Data Mode ......................................................................................................... 54
4.5.6 Menu Tree...................................................................................................................55
4.6 Notification Alerts............................................................................................................. 56
4.6.1 Fault Alert (Trip Alert) ................................................................................................. 56
4.6.2 Alarm Alert ................................................................................................................. 56
4.6.3 Info Alert .................................................................................................................... 56
Reyrolle, Operating, Manual 9
C53000-B7040-C101-1, Edition 08.2020

4.6.4 Parameter Edit Screen .................................................................................................57
5 Using Reydisp Evolution............................................................................................................................. 59
5.1 General.............................................................................................................................60
5.2 Connecting to the Relay for Setting via Reydisp Evolution.................................................. 62
6 In Service Operation................................................................................................................................... 63
6.1 Overview.......................................................................................................................... 64
6.2 Safety Notes..................................................................................................................... 65
6.3 Operation Options............................................................................................................ 66
6.3.1 General....................................................................................................................... 66
6.4 Modes of Operation.......................................................................................................... 67
6.4.1 Overview.....................................................................................................................67
6.4.2 Auxiliary Voltage .........................................................................................................67
6.4.3 CT Input ..................................................................................................................... 67
6.4.4 USB ............................................................................................................................ 70
6.4.5 Battery ....................................................................................................................... 70
6.4.6 Sleep Mode................................................................................................................. 71
6.4.7 Low Battery Status Indication.......................................................................................71
6.5 Online Operation using Reydisp.........................................................................................73
6.5.1 Reydisp Evolution Configuration Software....................................................................73
6.6 Indications........................................................................................................................ 74
6.6.1 General....................................................................................................................... 74
6.6.2 Reading Indications from the PC with Reydisp Evolution .............................................. 74
6.6.3 Displaying Indications..................................................................................................75
6.6.4 Resetting Stored Indications.........................................................................................75
6.7 Logs..................................................................................................................................77
6.7.1 Data Storage............................................................................................................... 77
6.7.2 Saving and Deleting the Logs.......................................................................................78
6.7.3 General Alarm ............................................................................................................ 78
6.8 Edit Measured and Metered Values....................................................................................79
6.8.1 Overview of Measured and Metered Values..................................................................79
6.8.2 Reading Measured Values and Metered Values ............................................................ 79
6.9 Change Device Settings.....................................................................................................80
6.10 Settings Group Selection .................................................................................................. 82
7 Commissioning........................................................................................................................................... 83
7.1 Overview.......................................................................................................................... 84
7.2 Test Suite Integrated in the Device.................................................................................... 85
7.2.1 Testing Protection Functions........................................................................................85
7.2.2 Output Test................................................................................................................. 85
7.3 Initial Startup.................................................................................................................... 86
7.4 Precommissioning Tests.................................................................................................... 87
7.5 Testing Readiness for Operation ....................................................................................... 88
8 Device Maintenance................................................................................................................................... 89
8.1 Execute Checks................................................................................................................. 90
8.1.1 Protection-Function Test..............................................................................................90
Table of Contents
10 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020

8.2 Self Monitoring ................................................................................................................ 91
8.3 General Information..........................................................................................................93
8.4 Troubleshooting............................................................................................................... 94
8.5 Replace and Return Defective Device................................................................................. 95
8.5.1 Backup Device ............................................................................................................ 95
8.5.2 Replacing a Device ......................................................................................................95
8.5.3 Returning a Device ......................................................................................................95
8.6 Firmware Update ............................................................................................................. 96
9 Security Settings.........................................................................................................................................97
9.1 Confirmation ID (Password Feature).................................................................................. 98
A Appendix.................................................................................................................................................... 99
A.1 Revision History.............................................................................................................. 100
Index.........................................................................................................................................................101
Table of Contents
Reyrolle, Operating, Manual 11
C53000-B7040-C101-1, Edition 08.2020

12 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020

First Steps
1.1 Unpacking, Repacking, Returning, Transporting, and Storing 14
1.2 Incoming Inspection 16
1.3 Electrical Inspection 17
1
Reyrolle, Operating, Manual 13
C53000-B7040-C101-1, Edition 08.2020

Unpacking, Repacking, Returning, Transporting, and Storing
Unpacking a Device
²Check the packaging for external transport damage. Damaged packing may indicate that the devices
inside have also sustained damage.
²Unpack devices carefully; do not use force.
²Check the devices via a reception control to ensure they are in perfect mechanical condition.
²Check the enclosed accessories against the delivery note to make sure everything is complete.
²Keep the packing in case the devices must be stored or transported elsewhere.
Repacking a Device
²If you store devices after reception control, they must be packed in appropriate storage packaging.
²If the device is to be transported, pack it in transport packaging.
²Enclose the accessories supplied and the test certificate in the package with the device.
i
i
NOTE
Devices are tested prior to delivery. The test certificate is a component of the devices.
Devices are packed on site in a way that meets the requirements of standard ISO 2248.
Returning a Device
²In order to return the device to the Siemens factory or any Siemens location, contact the customer
support center and follow the instructions specified by them.
i
i
NOTE
Do not transport the device when it is activated. Before transportation, ensure that the device is not in the
battery power mode and protective film is inserted between the battery clip and battery.
Fit the battery cover again and screw it to the housing before transportation.
Storing a Device
²Only store devices on which you have carried out an incoming inspection. The incoming inspection is
described in the Operating manual.
²7SR45 devices must be stored in rooms, which are clean and dry. Devices or associated replacement
modules must be stored at a temperature of -25 °C to +70 °C.
²To retain the battery life during the transportation and storage, Siemens recommends maintaining the
permissible temperature range from -20 °C to +45 °C.
²The relative humidity must be at a level where condensed water and ice are prevented from forming.
²If the device has been in storage for more than 2 years, connect it to an auxiliary voltage for 1 to 2 days.
This action will cause the electrolytic capacitors to form on the printed circuit board assemblies again.
Do not transport the device when it is activated. Before transportation, ensure that the device is not in
the battery power mode and paper strip is inserted between the battery clip and battery.
1.1
First Steps
1.1 Unpacking, Repacking, Returning, Transporting, and Storing
14 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020

Battery Disposal
!
WARNING
Warning about battery disposal.
Noncompliance with the safety instructions can result in severe injuries or considerable material
damage.
²Batteries can only be replaced by the ones recommended by Siemens. Replacing with the wrong type
of batteries can cause an explosion hazard.
²When discharged, or when properly secured against short-circuit, lithium batteries can be disposed off
through retailers or at depots run by competent organizations.
!
DANGER
Danger of explosion of the battery.
Noncompliance with the safety instructions can result in death, severe injury or considerable mate-
rial damage.
²Do not throw the lithium batteries into a fire.
²Comply with the relevant national/international regulations when disposing of batteries.
²The lithium battery contained in the device must be replaced by skilled personnel.
²Replace the dead batteries immediately and keep them out of reach of unskilled personnel.
First Steps
1.1 Unpacking, Repacking, Returning, Transporting, and Storing
Reyrolle, Operating, Manual 15
C53000-B7040-C101-1, Edition 08.2020

Incoming Inspection
Safety Notes
!
DANGER
Danger during incoming inspection
Noncompliance with the safety notes, can result in death, severe injury or considerable material
damage.
²Comply with all given safety notes when carrying out the incoming inspection.
²Note that hazardous voltages are present when you perform the incoming inspection.
²If you identify a defect during the incoming inspection, do not rectify it yourself. Repack the device and
contact the customer service center, stating the defect. In case of return, use the original packaging or
transport packaging that meets the requirements of standard ISO 2248.
Performing a Follow-Up Inspection on a Device
²Visually check for external damage as soon as you have unpacked the devices; they must not show any
signs of dents or cracks.
Checking the Rated Data and Functions
²Check the rated data and functions using the complete order designation/the product code. The device
manual contains all technical data and a description of the functions.
²Check the information provided on the rating plate too. The device features a product label sticker, which
contains the technical data.
²Make sure that the rated data of the device properly matches the system data. You can find the necessary
information in the device manual.
1.2
First Steps
1.2 Incoming Inspection
16 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020

Electrical Inspection
Device Protection
!
DANGER
Danger when connecting the device.
Noncompliance with the safety notes will result in death, severe injury or considerable material
damage.
²The device must be situated in the operating area for at least 2 hours before you connect it to the
power supply for the first time. This prevents condensation from forming in the device.
²If the device has been in storage for more than 2 years, connect it to an auxiliary voltage for 1 to 2
days. This will cause the electrolytic capacitors on the printed circuit-board assemblies to form again
(applicable for auxiliary-powered variants only)
²Perform the electrical inspection.
Activating the Battery
²Unscrew and open the battery compartment.
²To activate the battery, remove the protective paper strip from the battery by simply pulling on the paper
strip.
²Push the battery compartment including the battery back in again and screw it to the housing.
i
i
NOTE
The battery is covered by a paper strip, which prevents premature discharge.
The battery compartment is located on the front of the device. You do not have to take the battery out of
the compartment in order to remove the paper strip.
Earthing a Device
The 7SR45 devices are protection class III equipment. The devices must be connected with the system earth
prior to commissioning.
²The earth cable must be wired using a non-stranded cable with a cross section of 2.5 mm2/4 mm2 and
this must be terminated in the shortest possible path to the earth terminal/busbar in the panel or cubicle.
Connecting a Device
²Connect the device as per the connection diagrams mentioned in the device manual.
²Tighten the terminal screws to the prescribed torques (see chapter 2.5 Terminal Lugs Specification).
1.3
First Steps
1.3 Electrical Inspection
Reyrolle, Operating, Manual 17
C53000-B7040-C101-1, Edition 08.2020

Safety Notes
!
DANGER
Danger during electrical inspection
Noncompliance with the safety notes will result in death, severe injury or considerable material
damage.
²Comply with all given safety notes when carrying out the electrical inspection.
²Note that hazardous voltages are present when you perform the electrical inspection.
²During the electrical inspection, check that the device becomes ready for operation once it has been
connected to the power supply.
Performing the Electrical Inspection
²Connect the power supply, where applicable for the devices ordered with auxiliary supply option.
²Activate the power supply.
²If the device does not assume the normal operating state (process mode), switch off the power supply.
Disconnect the wiring and the earthing.
²Pack this device and return it to the manufacturer, stating the defect. Use transport packaging that meets
the requirements of standard ISO 2248.
First Steps
1.3 Electrical Inspection
18 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020

Installing the Device
2.1 Drilling Patterns and Device Dimensions 20
2.2 Mounting Instructions 23
2.3 Installing Devices 24
2.4 Earthing and Connecting Devices 25
2.5 Terminal Lugs Specification 26
2.6 Environmental Protection Hints 27
2
Reyrolle, Operating, Manual 19
C53000-B7040-C101-1, Edition 08.2020

Drilling Patterns and Device Dimensions
[dw_7SR45 case dimensions panel cut out view, 1, en_US]
Figure 2-1 Drilling Pattern
2.1
Installing the Device
2.1 Drilling Patterns and Device Dimensions
20 Reyrolle, Operating, Manual
C53000-B7040-C101-1, Edition 08.2020