Siemens Sinteso FD20 Operation manual

FD20
Sinteso™ Detector System
Range Description
Product Data
008164_y_en_-- Smart Infrastructure
2019-05-07

Imprint
2 | 152 008164_y_en_--
Imprint
Technical specifications and availability subject to change without notice.
Transmittal, reproduction, dissemination and/or editing of this document as well as
utilization of its contents and communication thereof to others without express
authorization are prohibited. Offenders will be held liable for payment of damages.
All rights created by patent grant or registration of a utility model or design patent
are reserved.
Issued by:
Siemens Switzerland Ltd.
Smart Infrastructure
Global Headquarters
Theilerstrasse 1a
CH-6300 Zug
Tel. [phone]
www.siemens.com/buildingtechnologies
Edition: 2019-05-07
Document ID: 008164_y_en_--
© Siemens Switzerland Ltd, 2004

008164_y_en_-- 3 | 152
Table of contents
1 About this document ............................................................................. 5
1.1 STEP download.......................................................................................... 5
1.2 Download center......................................................................................... 5
1.3 Revision history .......................................................................................... 6
2 Automatic fire detectors......................................................................... 7
2.1 Point detector FDOOT221, FDO221, FDT221............................................. 7
2.2 Multi-sensor fire detector FDOOT241-Ax, FDOOT241-8 ............................11
2.3 Point detector FDOOT241-9, FDOOT241-A, FDO241, FDT241 .................15
2.4 Multi-sensor fire detector FDOOTC241 ......................................................21
3 Detector base and base attachment...................................................... 23
3.1 Detector base FDB201, FDB202, FDB221, FDB222 ..................................23
4 Colored detector and base................................................................... 37
4.1 Type Overview...........................................................................................37
5 Manual call point ................................................................................ 40
5.1 Manual call point FDM221/223/224............................................................40
5.2 Manual call point FDM223H/224H 'Heavy Duty' .........................................44
5.3 Manual call point FDM225/226 (direct alarm activation)..............................47
5.4 Manual call point FDM231 (direct alarm activation) ....................................52
5.5 Manual call point FDM233/234 (direct/indirect alarm activation) .................54
5.6 Manual call point FDM243H 'Heavy Duty' (indirect alarm activation)...........56
6 Alarm indicators ................................................................................. 58
6.1 Alarm indicators FDAI91, FDAI92, FDAI93.................................................58
6.2 Addressable alarm indicator FDCAI221......................................................61
7 Alarm devices in the FDnet.................................................................. 63
7.1 Sounder base FDSB29x ............................................................................63
7.2 Sounder beacon FDS224, FDS225, FDS226, FDS227...............................68
7.3 Sounder bases FDSB226, FDSB227 .........................................................73
8 Line separator.................................................................................... 78
8.1 Line separator FDCL221............................................................................78
8.2 Multi line separator module FDCL221-M ....................................................80
9 Input/output modules .......................................................................... 83
9.1 FDCI221, FDCIO221 .................................................................................83
9.2 FDCI222, FDCIO222, FDCIO224...............................................................87
9.3 FDCI223....................................................................................................91
9.4 FDCIO223 .................................................................................................94
10 Special detectors................................................................................ 98
10.1 Linear smoke detector FDL241-9...............................................................98
10.2 Flame detector FDF241-9........................................................................100
10.3 SWING radio fire detection system ..........................................................104
10.4 Air sampling smoke detection kit FDBZ290..............................................112
10.5 Aspirating smoke detector FDA221, FDA241 ...........................................114
10.6 Multi-sensor fire detector FDOOT241-A9-Ex............................................118

4 | 152 008164_y_en_--
10.7 Manual call point FDM223-Ex ..................................................................121
10.8 Infrared flame detector DF1101-Ex ..........................................................125
10.9 Line adapter (Ex) FDCL221-Ex................................................................127
10.10 Safety barrier SB3 ...................................................................................131
11 Test units and accessories .................................................................133
11.1 Detector exchanger FDUD291.................................................................133
11.2 Detector exchanger and tester FDUD292, intelligent detector tester
FDUD293 ................................................................................................135
11.3 SCORP 8000...........................................................................................136
11.4 Adjustment kit FDLU291..........................................................................139
11.5 Detector tester RE6 .................................................................................140
11.6 Detector tester RE7T – Solo461 heat detector tester kit ...........................141
11.7 Detector tester RE8ST – Testifire 1001-101 RT test kit ............................142
11.8 Detector tester RE8STCO – Testifire 1001-101 ST test kit .......................143
11.9 Accessories and spare parts for RE7T/RE8ST/RE8STCO .......................144
11.10 Detector tester RE10, alarm test filter TF04 .............................................145
11.11 Line tester FDUL221................................................................................146
11.12 LE3 Test lamp .........................................................................................148
11.13 Adapter for FDnet devices FDUZ227 .......................................................149

About this document
STEP download
1
008164_y_en_-- 5 | 152
1 About this document
Goal and purpose
This document is an overview of Sinteso FD20 peripheral devices and accessories.
This document contains the following excerpts from the data sheets for the
individual products:
●Application/functions
●Type overview
●Technical data
You will find more information about the products in their individual data sheets.
Source language and reference document
●The source/original language of this document is German (de).
●The reference version of this document is the international version in English.
The international version is not localized.
Document identification
The document ID is structured as follows:
ID code Examples
ID_ModificationIndex_Language_COUNTRY
-- = multilingual or international
A6V10215123_a_de_DE
A6V10215123_a_en_--
A6V10315123_a_--_--
Date format
The date format in the document corresponds to the recommendation of
international standard ISO 8601 (format YYYY-MM-DD).
1.1 STEP download
You will find the current documentation and pictures on the Siemens intranet.
https://workspace.sbt.siemens.com/content/00001123/default.aspx
(STEP, Asset Portal)
1.2 Download center
You can download various types of documents, such as data sheets, installation
instructions, and license texts via the following Internet address:
https://siemens.com/bt/download
lEnter the document ID in the search field.
You will also find information about search variants and links to mobile
applications (apps) for various systems on the home page.

About this document
Revision history
1
6 | 152 008164_y_en_--
1.3 Revision history
The reference document's version applies to all languages into which the reference
document is translated.
The first edition of a language version or a country variant may, for example, be
version 'd' instead of 'a' if the reference document is already this version.
The table below shows this document's revision history:
Version Edition date Brief description
y 2019-05-07 ●New layout
●New products:
– FDS224, FDS225, FDS226, FDS227
– FDBS226, FDBS227

Automatic fire detectors
Point detector FDOOT221, FDO221,
FDT221
2
008164_y_en_-- 7 | 152
2 Automatic fire detectors
2.1 Point detector FDOOT221, FDO221, FDT221
2.1.1 Use
Multi-sensor smoke detector FDOOT221
Multi-sensor smoke detector consisting of:
●Point detector with additional heat sensors
●Detector dust cap to protect the point detector during the construction phase
Function
●Functions according to the scattered light principle with two sensors: Optical
forward and backward scattering
●Opto-electronic measuring chamber: Obstructs disruptive extraneous light
but can be relied upon to detect both light and dark smoke particles
●Two additional heat sensors increase the fire detector's immunity to
deceptive phenomena.
●Selectable detection behavior thanks to different parameter sets
Use
●For early detection of flaming fires of solid and liquid substances as well as
of smoldering fires
●For early and reliable fire detection in an environment with deceptive
phenomena
●Can be used addressed

Automatic fire detectors
Point detector FDOOT221, FDO221, FDT221
2
8 | 152 008164_y_en_--
Smoke detector FDO221
Smoke detector consisting of:
●Point detector
●Detector dust cap to protect the point detector during the construction phase
Function
●Functions according to the scattered light principle with one sensor: Optical
forward scattering
●Opto-electronic measuring chamber: Obstructs disruptive extraneous light
but can be relied upon to detect both light and dark smoke particles
●Selectable detection behavior thanks to different parameter sets
Use
●For early detection of flaming fires as well as smoldering fires
●Can be used addressed
Heat detector FDT221
Heat detector consisting of:
●Point detector
●Detector dust cap to protect the point detector during the construction phase
Function
●Two redundant heat sensors: If one of the two sensors fails, the fire detector
still conforms to the highest response class
●Measures the operating temperature and the temperature inside the
detector housing so that temperature rise can be detected.
●Selectable detection behavior thanks to different parameter sets
Use
●For monitoring rooms in which rapid temperature rise is to be expected in
the event of a fire or if optical detection is difficult
●Can be used addressed
Dummy detector FDX291
Use
●To cover bases that are left empty for prolonged periods of time

Automatic fire detectors
Point detector FDOOT221, FDO221, FDT221
2
008164_y_en_-- 9 | 152
2.1.2 Type Overview
Type Designation Order no. Weight [kg]
Point detector
FDOOT221 Multi-sensor smoke detector A5Q00001566 0.105
FDO221 Smoke detector A5Q00001565 0.104
FDT221 Heat detector A5Q00001567 0.086
Accessories
FDX291 Dummy detector S54319-F2-A1 0.120
You will find information about detector bases and accessories in document
007775.
2.1.3 Technical data
FDOOT221 FDO221 FDT221
Operating voltage
(modulated)
DC 12…33 V
Operating current (quiescent) 190…230 μA 180…230 μA 130…200 μA
External
alarm
indicators
which can be
connected
Without
sounder base
2
With sounder
base
1
Communication protocol FDnet
System compatibility FS20, AlgoRex, SIGMASYS
Operating temperature -10…+60 °C -10…+60 °C Dependent on
configuration:
-10…+50 °C
-10…+70 °C
Storage temperature -30…+75°C
Air humidity (short-term
moisture condensation
permitted)
≤95 % rel.
Color ~RAL 9010 pure white
Protection
category
(IEC 60529)
With detector
base
FDB221/-AA,
FDB222,
FDB291
IP43
Base FDB221
and sealing
element
FDBZ295
IP44
Base
attachment
humid FDB293
and base
attachment wet
FDB295
IP44

Automatic fire detectors
Point detector FDOOT221, FDO221, FDT221
2
10 | 152 008164_y_en_--
FDOOT221 FDO221 FDT221
Standards CEA 4021
EN 54-7
EN 54-17
EN 54-7
EN 54-17
EN 54-5
EN 54-17
Approvals:
●VdS
●LPCB
●FM
●DNV GL (marine)
G204006
126bg/01
3029351
MEDB00003UK
G204018
126bf/01
3029351
MEDB00003UK
G204020
126bj/01
3046115
MEDB00003UR
Permissible wind speed Max. 5 m/s Max. 5 m/s -

Automatic fire detectors
Multi
-
sensor fire de
tector FDOOT241
-
Ax, FDOOT241
-
8
2
008164_y_en_-- 11 | 152
2.2 Multi-sensor fire detector FDOOT241-Ax,
FDOOT241-8
2.2.1 Use
Multi-sensor fire detector FDOOT241-A3, FDOOT241-A4, FDOOT241-A5, FDOOT241-A9, FDOOT241-8
Multi-sensor fire detector consisting of:
●Point detector with additional heat sensors
●Detector dust cap to protect the point detector during the construction phase
Function
●Functions according to the scattered light principle with two sensors: optical
forward and backward scattering
●Opto-electronic measuring chamber, obstructs disruptive extraneous light
but can be relied upon to detect both light and dark smoke particles
●Two additional heat sensors increase the fire detector's immunity to
deceptive phenomena
●Can be set as a multi-sensor smoke detector, smoke detector, or heat
detector by the software
●Selectable detection behavior thanks to application-specific ASA parameter
sets
●Multi-protocol:
– FDOOT241-A3 (AlgoRex AnalogPLUS, FDnet)
– FDOOT241-A4 (SIGMALOOP, FDnet)
– FDOOT241-A5 (AlgoRex Interactive, FDnet)
– FDOOT241-A9: Collective / GMT (Cerberus / Siemens) / SynoLINE300,
FDnet
– FDOOT241-8 (MS8/PMT, FDnet)
Use
●For early detection of flaming fires of solid and liquid substances as well as
of smoldering fires
●For early and reliable fire detection in an environment with deceptive
phenomena
●Can be used addressed, for the gradual modernization of:
– AlgoRex AnalogPLUS on Sinteso FDnet ¹ with FDOOT241-A3
– SIGMALOOP on Sinteso FDnet ¹ with FDOOT241-A4
– AlgoRex Interactive on Sinteso FDnet ¹ with FDOOT241-A5
– Collective/GMT/SynoLINE300 on Sinteso FDnet ¹ with FDOOT241-A9
– MS8/PMT on Sinteso FDnet with FDOOT241-8
¹ FS20 compatibility in FDnet is assured subject to in-country FS20 software support.

Automatic fire detectors
Multi
-
sensor fire detector FDOOT241
-
Ax, FDOOT241
-
8
2
12 | 152 008164_y_en_--
2.2.2 Type Overview
Type Order number Designation Weight [kg]
Point detector
FDOOT241-A3 S54310-F10-A1 Multi-sensor fire detector Sinteso (A+) 0.106
FDOOT241-A4 S54310-F9-A1 Multi-sensor fire detector Sinteso (SIGMA) 0.106
FDOOT241-A5 S54310-F14-A1 Multi-sensor fire detector Sinteso
(Interactive)
0.106
FDOOT241-A9 S54310-F11-A1 Multi-sensor fire detector Sinteso ASA 0.106
FDOOT241-8 A5Q00004663 Multi-sensor smoke detector Sinteso ASA 0.106
Migration kits
FDOOT241-8M A5Q00016038 Migration kit (FDOOT241-8 + FDB281) 0.235
FDOOT241-8B A5Q00015956 Migration kit (FDOOT241-8 + FDB221) 0.162
Base adapter
FDB241 S54319-F13-A1 Base adapter Sinteso (SIGMA/A+) 0.086
FDB251 S54319-F28-A1 Base adapter Sinteso (Interactive) 0.090
FDB281 A5Q00004929 Base adapter MS8/PMT 0.125
FDB299 S54319-F14-A1 Base adapter Sinteso (AlgoRex coll.) 0.086
Other accessories
FDUD290 S54370-S13-A1 Removal tool for adapter 0.098
You will find information about the color options for the fire detectors in the data
sheet 009409.
2.2.2.1 Accessories
Base adapter FDB241
Function:
●For adapting AnalogPLUS and SIGMALOOP for Sinteso detector systems
●Can be set with jumper on replaced detector

Automatic fire detectors
Multi
-
sensor fire detector FDOOT241
-
Ax, FDOOT241
-
8
2
008164_y_en_-- 13 | 152
Base adapter FDB251
Function:
●For adapting Interactive for Sinteso detector systems
●Can be set with jumper on replaced detector
Base adapter FDB281
Function:
●For adapting MS8/PMT for Sinteso detector systems
Base adapter FDB299
Function:
●For adapting AlgoRex (collective) and SIGMACON for Sinteso detector
systems
Removal tool for adapter FDUD290
Function:
●For removing base adapters FDB2xx with detector exchanger, detector
exchanger and tester, or detector tester

Automatic fire detectors
Multi
-
sensor fire detector FDOOT241
-
Ax, FDOOT241
-
8
2
14 | 152 008164_y_en_--
2.2.3 Technical data
FDOOT241-A3 FDOOT241-A4 FDOOT241-A5 FDOOT241-A9 FDOOT241-8
FDOOT241-A3,
FDOOT241-A4,
FDOOT241-A5,
FDOOT241-A9
FDOOT241-8
In the
AnalogPLUS
detector system
In the
SIGMALOOP
detector system
In the
Interactive
detector
system
In the collective
detector
system
In the MS8
detector system
In FDnet
Operating voltage
(modulated)
DC 16…28 V DC 10…28 V DC 21…33 V DC 14…28 V DC 14…28 V DC 12…33 V
Operating current
(quiescent)
190 μA 200 μA 200 μA 65…125 μA 200 μA 190…230 μA
External alarm indicators
(AI) which can be
connected
2 2 2 2 2 2
Communication protocol AnalogPLUS SIGMALOOP Interactive Collective MS8/PMT FDnet
System compatibility AlgoRex SIGMASYS AlgoRex AlgoRex,
SIGMASYS,
CZ10
SIGMASYS,
BMS,
SM80/88/D100,
SRS
FS20 ¹
Operating temperature -25…+70°C -25…+70°C -25…+70°C -35…+70°C -25…+70°C -
Storage temperature -30…+75°C -30…+75°C -30…+75°C -35…+75°C -30…+75°C -
Humidity ≤95 % rel.
Color ~RAL 9010 pure white
Protection category
(IEC 60529)
with detector base
FDB221, FDB222
IP43
Base attachment FDB291 IP43
Base adapter FDB281 IP44
Base adapter FDB241
and
detector base DB1131A,
or SPF3600
IP44
Base adapter FDB251
and
detector base DB1151A
IP44
Base adapter FDB299
and
collective detector base
DB1101A or SPF600
IP44
Standards CEA 4021, EN 54-5, EN 54-7, EN 54-17, EN 54-27 2
Approvals
VdS
LPCB
DNV GL (marine)
G211125
126bh/02
-
G212007
-
-
G215057
126bh/07
-
G212036
126bh/03
MEDB000
03UK
G204133
-
-
-
-
-
Permissible wind speed 1…20 m/s
¹ FS20 compatibility in FDnet is assured subject to in-country FS20 software support.
2EN 54-27 for FDOOT241-A3, FDOOT241-A4, FDOOT241-A9 only

Automatic fire detectors
Point detector FDOOT241
-
9, FDOOT241
-
A, FDO241, FDT241
2
008164_y_en_-- 15 | 152
2.3 Point detector FDOOT241-9, FDOOT241-A,
FDO241, FDT241
2.3.1 Use
Multi-sensor fire detector FDOOT241-9
●Point detector with additional heat sensors
●Optional detector dust cap to protect the point detector during the
construction phase
Function
●Functions according to the scattered light principle with two sensors: Optical
forward and backward scattering
●Opto-electronic measuring chamber: Obstructs disruptive extraneous light
but can be relied upon to detect both light and dark smoke particles
●Two additional heat sensors increase the fire detector's immunity to
deceptive phenomena.
●Can be set as a multi-sensor smoke detector, smoke detector, or heat
detector by the software
●Selectable detection behavior thanks to application-specific ASA parameter
sets
●Multi-protocol: Collective / GMT (Cerberus / Siemens) / SynoLINE300,
FDnet
Use
●For early detection of flaming fires of solid and liquid substances as well as
of smoldering fires
●For early and reliable fire detection in an environment with deceptive
phenomena
●Can be used addressed, for the gradual modernization of:
Collective/GMT/SynoLINE300 on Sinteso FDnet ¹
¹ FS20 compatibility in FDnet is assured subject to in-country FS20 software support.

Automatic fire detectors
Point detector FDOOT241
-
9, FDOOT241
-
A, FDO241, FDT241
2
16 | 152 008164_y_en_--
Multi-sensor fire detector FDOOT241-A
●Point detector with additional heat sensors
●Optional detector dust cap to protect the point detector during the
construction phase
Function
●Functions according to the scattered light principle with two sensors: Optical
forward and backward scattering
●Opto-electronic measuring chamber: Obstructs disruptive extraneous light
but can be relied upon to detect both light and dark smoke particles
●Two additional heat sensors increase the fire detector's immunity to
deceptive phenomena.
●Can be set as a multi-sensor smoke detector, smoke detector, or heat
detector by the software
●Selectable detection behavior thanks to application-specific ASA parameter
sets
Use
●For early detection of flaming fires of solid and liquid substances as well as
of smoldering fires
●For early and reliable fire detection in an environment with deceptive
phenomena
●Can be used addressed
Smoke detector FDO241
●Optional detector dust cap to protect the point detector during the
construction phase
Function
●Functions according to the scattered light principle with one sensor: Optical
forward scattering
●Opto-electronic measuring chamber: Obstructs disruptive extraneous light
but can be relied upon to detect both light and dark smoke particles
●Selectable detection behavior thanks to application-specific ASA parameter
sets
Use
●For early detection of flaming fires as well as smoldering fires
●Can be used addressed

Automatic fire detectors
Point detector F
DOOT241
-
9, FDOOT241
-
A, FDO241, FDT241
2
008164_y_en_-- 17 | 152
Heat detector FDT241
●Optional detector dust cap to protect the point detector during the
construction phase
Function
●Two heat sensors prevent the total failure of the thermal detection capacity
of in the event of a fault affecting a sensor.
●Measures the operating temperature and the temperature inside the
detector housing so that temperature rise can be detected.
●Selectable detection behavior thanks to application-specific ASA parameter
sets
Use
●For monitoring rooms in which rapid temperature rise is to be expected in
the event of a fire or if optical detection is difficult
●Can be used addressed
Dummy detector FDX291
Use
●To cover bases that are left empty for prolonged periods of time
2.3.2 Type Overview
Type Designation Order no. Weight [kg]
Point detector
FDOOT241-9 Multi-sensor smoke detector A5Q00004813 0.106
FDOOT241-A Multi-sensor smoke detector S54310-F13-A1 0.106
FDO241 Smoke detector A5Q00004811 0.103
FDT241 Heat detector A5Q00004812 0.086
Base adapter
FDB241 Base adapter Sinteso (SIGMA/A+) S54319-F13-A1 0.086
FDB251 Base adapter Sinteso (Interactive) S54319-F28-A1 0.090
FDB281 Base adapter MS8/PMT A5Q00004929 0.125
FDB299 Base adapter Sinteso (AlgoRex coll.) S54319-F14-A1 0.086
Other accessories
FDUD290 Removal tool for adapter S54370-S13-A1 0.098
FDX291 Dummy detector S54319-F2-A1 0.120
FDOOT241-9M Migration kit A5Q00015955 0.140

Automatic fire detectors
Point detector FDOOT241
-
9, FDOOT241
-
A, FDO241, FDT241
2
18 | 152 008164_y_en_--
2.3.2.1 Accessories
You will
find more information about detector bases and accessories
in document
007775.
Addressable detector base FDB221 / FDB221-AA
Function:
●Detector base with stilts for fire detectors with addressable signal processing
●'Orange' connection terminals, 0.2…1.5 mm2conductor cross-section
●FDB221-AA also contains micro terminal DBZ1190-AA
Use:
●For recess-mounted cable entry
●For surface-mounted cable entry up to a cable diameter of 6 mm
Flat, addressable detector base FDB222
Function:
●Flat detector base for fire detectors with addressable signal processing
●'Orange' connection terminals, 0.2…1.5 mm2conductor cross-section
Use:
●For flush mounting; only for recess-mounted cable entry
Base attachment FDB291
Function:
●For routing surface-mounted cables larger than Ø 6 mm
●Detector base is secured with a snap fastener
Base attachment humid FDB293
●For achieving a higher protection category
●For mounting in wet or humid environments
●Required when using detector heating unit FDBH291
●Required when using protective cage DBZ1194 or EMC-protective cage
FDBZ294
●Mounted between detector base and ceiling
●Detector base mounted quickly: The detector base simply clicks into place in
base attachment humid FDB293.

Automatic fire detectors
Point detector FDOOT241
-
9, FDOOT241
-
A, FDO241, FDT241
2
008164_y_en_-- 19 | 152
Base attachment wet FDB295
●Base attachment wet with additional integrated rubber seal for mounting in wet
or humid environments
●For achieving a higher protection category
●For mounting in wet or humid environments
●Required when using detector heating unit FDBH291
●Required when using protective cage DBZ1194
●Mounted between detector base and ceiling
●Detector base mounted quickly: The detector base simply clicks into place in
base attachment wet FDB295.
Sealing element FDBZ295
Function:
●For improving the protection category. However, detectors can no longer be
installed or removed using the detector exchanger.
Note: Cannot be used in conjunction with designation plate FDBZ291!

Automatic fire detectors
Point detector FDOOT241
-
9, FD
OOT241
-
A, FDO241, FDT241
2
20 | 152 008164_y_en_--
2.3.3 Technical data
FDOOT241-9 FDOOT241-A FDO241 FDT241
Operating voltage (modulated) DC 12…33 V
Operating current (quiescent) 65…230 μA 180…230 μA 130…200 μA
External alarm
indicators (EAI)
which can be
connected
Without sounder
base
2
With sounder
base
1
Communication protocol FD20 or collective FDnet
System compatibility
FS20¹, AlgoRex, SIGMASYS
CZ10, CS11,
BC10, FC10,
XC10, FC330A,
FC700A, BMS,
SM80/88D100
–
Operating temperature -25…+70°C -35…+70°C -25…+70°C -25…+50°C /
-25…+65 °C /
Depending on parameter settings
Storage temperature -30…+75°C -35…+75°C -30…+75°C
Air humidity ≤95 % rel.
Color ~RAL 9010 pure white
Protection
category
(IEC 60529)
With detector base
FDB221/-AA,
FDB222, FDB291
IP43
Base FDB221 and
sealing element
FDBZ295 IP44
Base attachment
humid FDB293 or
base attachment
wet FDB295
Standards
CEA 4021, EN 54-5 – EN 54-5
EN 54-17
EN 54-7 –
– EN 54-27 – –
Approvals:
●VdS
●LPCB
●FM
●DNV GL (marine)
G204007
126bh/01
3029351
–
G215052
–
–
–
G204017
126bf/02
3029351
MEDB00003UK
G204019
126bj/02
3046115
MEDB00003UR
Permissible wind speed 1…20 m/s –
¹FS20 compatibility in FDnet is assured subject to in-country FS20 software
support.