Siemens HiPath 1100 User manual

HiPath 1100
HiPath 1120
HiPath 1150
HiPath 1190
Telefone de Sistema
optiPoint 500 entry
Guia rápido
KBA.book Seite 1 Freitag, 26. Januar 2007 9:32 09

2
Explanation of symbols
Numbering plan
Symbol Explanation
ll, r, p... Enter numbers, keys, password, internal or external numbers, etc.
wSignaling with a short beep
n/tLift/Replace the handset
sStart conversation
Consultation key
Programmable key is ON
Programmable key deleted
Blinking programmable key
Description HiPath 1120 HiPath 1150 HiPath 1190
External line 801 to 808 801 to 832 801 to 845
Extension, including S011 t o 3 0 11 to 60
610 to 645
101 to 240
Group of external lines 0, 890 to 899
Internal subscriber group 770 to 779
Hunt Groups (HG) 780 to 789
UCD subscriber group 790 to 799
Carrier 9
EVM - Default internal number 790
EVM - Message ports 7491 to 7492
EVM - Virtual ports 744 to 747
Fax/DID - Virtual message ports 740 to 743
USB/CAPI line 10 100
Substitution for * and # 75 and 76 (accordingly)
Consultation
KBA.book Seite 2 Freitag, 26. Januar 2007 9:32 09

3
Configuring the keys
The key layout is shown below. Technical support can adapt the default setting of the keys according to
your needs.
Notes:
The Mute/Internal key will function as Internal when automatic seizure of an external line is activated. In
all other cases the Mute/internal key functions as Mute.
For programming of the keys, consult the HiPath 1100 Manager. Labels for programmable keys can be
printed/changed using the "Printing Labels" service on the HiPath 1100 Manager.
System telephone settings can be configured individually according to each user’s preferences. For further
information on how to configure a system telephone, see the manual included with the unit.
Feature
Features can be selected as follows:
1. Using the Feature key and its associated feature code
2. Programmable key
3. Using the feature code
System telephone functions
Accessing a mailbox key programmed for MWI
Call charge consultation qji
Call forwarding p
Call forwarding
Deactivation
Parking
dto mslot
Parking
Resuming a call
dto mslot
Programming a feature for a key qme p
Redial
Speaker Activate/deactivate speaker
s
Headset Activate/deactivate headset
Mailbox
Call forwarding
Call forwarding
Parking
Parking
Select a key
Redialing
Speaker
Activate headset
KBA.book Seite 3 Freitag, 26. Januar 2007 9:32 09

4
Seizure of an external line
Functions used when making calls
Feature Code
External call dp
External call using a group of exter-
nal lines lmd.lmm pexternal
Seizure of a specific external line lde.lde pexternal
Internet Access
Activation qhmg pexternal line
Internet Access
Deactivation rhmg pexternal line
External line reservation
Busy
1) Wait for wtPhone rings. npexternal s
or
2)
qil
tPhone rings npexternal s
Feature Code
System speed dialing qk+ ddd.fhm
Individual speed dial qk+ qd.qhs
Individual speed dialing
Programming qmf+qd.qhpnumber
wait for w
Speakerphone auto-answering
Mode
Activation
qmjwait for w
Speakerphone auto-answering
mode
Deactivation
rmjwait for w
Direct communication call qldpextension with a system telephone
wait for wsrecord message
Internal call pextension
Calling a call group (CG) kkd.kkm
Calling a Hunt Group (HG) kld.klm
Calling a UCD subscriber group kmd.kmm
Urgent Call
(busy extension)
1) np(busy) Wait ws
or
2 np(busy) qils
Hotline
(If programmed) ns
Warmline
(If programmed) nWait for s
Override
Busy extension pbusy extension
qjfs
Consultation
Consultation
KBA.book Seite 4 Freitag, 26. Januar 2007 9:32 09

5
Functions used during calls
LCR Bypass qhi pCarrier + number s
Silent Monitoring
on busy extension qmhh pbusy extension s
Recall
Activation
(Extension does not answer or is busy)
1)pno answer qilwtWait.
Phone rings ns
or
2) Wait for wt
Wait. Phone rings ns
Callback
Deactivation ril
Carrier m
Using a temporary MSN for making
a call qhe pMSN slot or MSN number
pexternal line pexternal number
Feature Code
Account code qjd paccount code rpnumber
Conference spnumber
sqgs
Consultation
(To end a consultation wait for the call
to be disconnected)
sps
Parking s qij+
d.m
Retrieving a parked
call rij+ d.m s
General Parking st
Retrieving a parked external
call qjg + pline s
To g g l e
(Use after consultation, for answering
a second or urgent call)
sqfs
Suffix dialing s+ pdata
Retrieving a call on hold qd
(if busy or no answer)
Tr a n s f e r
(When an external analog line pro-
grammed as “Type of answering sig-
nal” or a digital line is being used, you
must wait for an answer before trans-
ferring the call. For transfers without
consultation, there is no need to wait
before answering)
spnumber t
Conference
Consultation
Consultation
Consultation
Gen. Parking
Consultation
Consultation
Consultation
KBA.book Seite 5 Freitag, 26. Januar 2007 9:32 09

6
Functions used when receiving calls
Miscellaneous functions
Feature Code
Accessing a mailbox pVoice mail group
Answering a call on
hold sqiis
or
sqfs
Group pickup nqik s
Individual pickup nqim pextension s
Call forwarding on an analog line:
Call forwarding to external number qee pexternal line
Internal call forwarding qee pextension, Voice mail group, call group
or Fax/DID :
Call forwarding
Deactivation ree
Call forward no answer or busy
Activation qeh pextension,voice mail group , call
group or external line.
Call forward no answer or busy
Deactivation reh
Do not disturb
Activation qmk
Do not disturb
Deactivation rmk
EVM:
Consultation at the extension being
used kmdVM group ppassword
Consultation from another exten-
sion kmdVM group ppassword pextension
s
Consultation from an external
line spyour external number+qppassword p extension
Feature Code
Entrance Telephone
Door Opener
1) qje
or
2) qjepexten-
sion
General alarm
Deactivation rmheh ppassword
Electronic lock password change qmg pcurrent password pnew password
pconfirm new password w
Electronic lock
Activation qjj ppassword
Electronic lock
Deactivation rjj ppassword
Consultation
Consultation
Consultation
Consultation
KBA.book Seite 6 Freitag, 26. Januar 2007 9:32 09

7
Busy signal when extension is busy
Activation qmhee
Busy signal when extension is busy
Deactivation rmhee
System programming mode
Activation qmi ppassword pcodes
Deactivating Features
(Call forwarding, do not disturb, data
protection, alarm clock, callback and
speakerphone auto-answering)
rd
Language/Country settings qmhef pcountry code
Call Group (CG) and Hunt Group
(HG) Login qli pgroup (if it belongs to more than one
group)
Call Group (CG) and Hunt Group
(HG) Logout rli pgroup (if it belongs to more than one
group)
Room monitor
(Babyphone) qll
Music on Hold
Activation qmhed Music
Music on Hold
Deactivation rmhed
Remote configuration
HiPath 1100 Manager qmmf
Remote configuration
Using an MF telephone
1) The local programming extension is talking to the remote
programmer:
qmme wt
The remote programmer must provide:
ppassword pprogramming codes.
2) The remote programmer dials the system and is attended
by the Fax/DID feature:
qmi ppassword pProgramming codes.
Data protection
Activation qhmd
Data protection
Deactivation rhmd
Relay
Activation (only for HiPath 1120) qmd
Relay
Activation (only for HiPath 1120) rmd
Night service
Activation qhh ppassword
Night service
Deactivation rhh ppassword
Call waiting tone
Activation rlk wt
Call waiting tone
Deactivation qlk wt
COS (Class of service) Changeover qidl pextension ppassword
KBA.book Seite 7 Freitag, 26. Januar 2007 9:32 09

8
Alarm clock
UCD subscriber group functions
Satellite PABX
Special functions for ISDN lines
Feature Code
Alarm clock
(Daily) qhje ptime (e.g. 1230)
Alarm clock
(Daily, except weekends) qhjf ptime (e.g. 1230)
Alarm clock
(After a specified time period) qhjg ptime (e.g 1230)
Alarm clock
(For a specified date and time) qhjh pdate/time (e.g. 24121830)
Alarm clock
Deactivation rhj
Feature Code
Agent available qhdf
Agent unavailable rhdf
Calling a UCD subscriber group kmd.kmm
Logging into a UCD subscriber
group qhdepgroup (if the extension belongs to more than one group)
Logging out of a UCD subscriber
group rhde
UCD agent in service qhdg
UCD agent out of service rhdg
Feature Code
Flash on external analog line qie
Operation as a Satellite PABX lmd.lmmpline number
Feature Code
Immediate call forwarding for MSN
Activation qjhe pexternal line wpMSN
Immediate call forwarding for MSN
Deactivation rjhe w
Call forwarding - no answer, for
MSN
Activation
qjhf pexternal line wpMSN
Call forwarding - no answer, for
MSN
Deactivation
rjhf w
Consultation
KBA.book Seite 8 Freitag, 26. Januar 2007 9:32 09

9
Call forwarding for MSN when the line
is busy
Activation
qjhg pexternal line wpMSN
Call forwarding - Busy, for MSN
Deactivation rjhg w
Caller ID
(Trace) qlh
Restriction for sending MSN
Activation qlj
Restriction for sending MSN
Deactivation rlj
Using Features provided by
a carrier over an ISDN Network qidg pexterno pISDN code
Note 1:
For Korea the numbering plan changes as follows:
a) Access to the group of external lines is done with digit "9" instead of "0";
b) Calling an operator terminal is done with digit "0" instead of "9"
c) Group call pickup is done with sequence "*0" instead of "*57"
d) Recovery of a parked call is done with sequence "*57" instead of "*0"
Note 2:
Feature Codes can be changed with the HiPath 1100 Manager. An expert
should be consulted in this case.
Consultation
KBA.book Seite 9 Freitag, 26. Januar 2007 9:32 09

The information provided in this document
contains merely general descriptions or char-
acteristics of performance which in case of
actual use do not always apply as described
or which may change as the result of further
development of the products.
An obligation to provide the respective char-
acteristics shall only exist if expressly agreed
in the terms of the contract.
All trademarks are the property of Siemens
Enterprise Communications GmbH & Co. KG
or their respective owners.
© Siemens Ltda.
Siemens Communications
Rua Pedro Gusso, 2635 • Curitiba-PR/BR
Ref. No.: A31003-K1270-U106-2-7619
Subject to availability. Right of modification re-
served.
26.01.2007 V6.0
www.siemens.com/enterprise
KBA.book Seite 8 Freitag, 26. Januar 2007 9:32 09