
806913A01
s
Covering Frame - Draw-out
Marco de protección para puertas De Drawout
Cadre pour découpe de porte De Drawout
1 / 3
For Use With Frame JG, LG
Para Usar Con Caja Base JG, LG
Installation Instructions / Instructivo de Instalación
Use only with Siemens certified Components.
Utilizar únicamente con componentes certificados de Siemens.
A utiliser uniquement avec les composants certifiés Siemens.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puedecausar la muerte o lesiones graves. Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
Turn off and lock out all power supplying this device before
working on this device.
Replace allcovers before power supplying this device is
turned on.
Couper l'alimentation del'appareil et barrer avant de
travailler.
Remplacez touts les couverts avant que
l'approvisionnement de pouvoirsoit alimenté.
Tensión peligrosa.
Puedecausar la muerte o lesiones graves. Tension dangereuse.
Danger de mort ou risque de blessures graves.
Hazardous Voltage
Will cause death or serious injury
Desenergice totalmente antes de instalar o darle servicio.
Reemplace todas las barreras y cubiertas antes de
energizar el interruptor.
I.L. No. 806913A01
U.S. Cat. No.
Item: BZLLBDC Euro Order No.
3VL9400-8BH01
BZLLBDC / 3VL9400-8BH01
-6X
d
a
c
b
- 4 X M4 X 16mm
Ø .55“
[ Ø 14 mm ]
10 mm
Ø .22“
[ Ø 5.5 mm ]
Cal. ISO 6789
NOTE - These instructions do not purport to cover all details or variations
in equipment, or to provide for every possible contingency to be met in
connection with installation, operation or maintenance. Should further
information be desired or should particular problems arise, which are not
covered sufficiently for the purchaser’s purposes, the matter should be
referred to the local Siemens sales office. The contents of this instruction
manual shall not become part of or modify any prior or existing
agreement, commitment or relationship. The sales contract contains the
entire obligation of Siemens. The warranty contained in the contract
between the parties is the sole warranty of Siemens. Any statements
contained herein do not create new warranties or modify the existing
warranty.
Trademarks - Unless otherwise noted, all names identified by ® are
registered trademarks of Siemens AG or Siemens Industry, Inc. The
remaining trademarks in this publication may be trademarks whose use
by third parties for their own purposes could violate the rights of the
owner.