Siemens SITRANS LR560 User manual

Operating instructions
SITRANS LR560 (PROFIBUS PA)
Radar transmitters
06/2018Edition
SITRANS
www.siemens.com/processautomation

___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SITRANS
Radar Transmitters
LR560 (PROFIBUS PA)
Operating Instructions
06/2018
A5E34648471
-AE
Introduction
1
Safety notes
2
Description
3
Installing/mounting
4
Connecting
5
Commissioning
6
Operating
7
Parameter Reference
8
Service and maintenance
9
Diagnosing and
troubleshooting
10
Technical data
11
Dimension drawings
12
Technical reference
A
PROFIBUS PA profile
structure
B
Communications via
PROFIBUS PA
C
Certificates and Support
D
HMI menu structure
E
List of abbreviations
F

Siemens AG
Division Process Industries and Drives
Postfach 48 48
90026 NÜRNBERG
GERMANY
Document order number: A5E34648471
Ⓟ
04/2018 Subject to change
Copyright © Siemens AG 2016.
All rights reserved
Legal information
Warning notice system
This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent
damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert
symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are
graded according to the degree of danger.
DANGER
indicates that death or severe personal injury will result if proper precautions are not taken.
WARNING
indicates that death or severe personal injury may result if proper precautions are not taken.
CAUTION
indicates that minor personal injury can result if proper precautions are not taken.
NOTICE
indicates that property damage can result if proper precautions are not taken.
If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage.
Qualified Personnel
The product/system described in this documentation may be operated only by
personnel qualified
for the specific
task in accordance with the relevant documentation, in particular its warning notices and safety instructions.
Qualified personnel are those who, based on their training and experience, are capable of identifying risks and
avoiding potential hazards when working with these products/systems.
Proper use of Siemens products
Note the following:
WARNING
Siemens products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.

LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE 3
Table of contents
1 Introduction........................................................................................................................................... 11
1.1 LR560 PROFIBUS PA manual usage ....................................................................................11
1.2 Purpose of this documentation ...............................................................................................11
1.3 Checking the consignment .....................................................................................................11
1.4 Security information ................................................................................................................12
1.5 Transportation and storage.....................................................................................................12
1.6 Notes on warranty...................................................................................................................13
1.7 Firmware revision history........................................................................................................13
2 Safety notes.......................................................................................................................................... 15
2.1 Preconditions for use ..............................................................................................................15
2.1.1 Safety marking symbols..........................................................................................................15
2.1.2 Improper device modifications ................................................................................................15
2.1.3 Laws and directives ................................................................................................................16
2.1.4 Conformity with European directives ......................................................................................16
2.1.5 Radio Equipment Directive (RED) compliance (Europe)........................................................17
2.1.6 Federal Communications Commission (FCC) conformity (US)..............................................17
2.1.7 Industry Canada......................................................................................................................18
2.2 Use in hazardous areas..........................................................................................................18
2.3 Requirements for special applications ....................................................................................19
3 Description............................................................................................................................................ 21
3.1 SITRANS LR560 overview .....................................................................................................21
4 Installing/mounting ................................................................................................................................ 23
4.1 Basic safety instructions .........................................................................................................23
4.1.1 Installation location requirements ...........................................................................................24
4.1.2 Proper mounting .....................................................................................................................25
4.1.2.1 Incorrect mounting ..................................................................................................................25
4.2 Installation instructions............................................................................................................26
4.2.1 Pressure equipment directive (PED, 2014/68/EU) .................................................................26
4.2.2 Nozzle location........................................................................................................................27
4.2.3 Environment............................................................................................................................28
4.2.4 Sunshield ................................................................................................................................28
4.2.5 Aimer adjustment ....................................................................................................................29
4.2.6 Air purging system ..................................................................................................................30
4.2.7 Removable display..................................................................................................................31
4.2.8 Basic PLC configuration with PROFIBUS PA.........................................................................32
4.3 Disassembly............................................................................................................................32
5 Connecting ........................................................................................................................................... 35

Table of contents
LR560 (PROFIBUS PA)
4Operating Instructions, 06/2018, A5E34648471-AE
5.1 Basic safety information......................................................................................................... 35
5.1.1 Incorrect connection to power source .................................................................................... 36
5.2 Connecting SITRANS LR560................................................................................................. 37
5.3 Basic PLC configuration......................................................................................................... 38
5.4 PLC configuration for hazardous areas ................................................................................. 39
5.5 Nameplates for hazardous area installations......................................................................... 39
5.5.1 PROFIBUS PA Non-Sparking/Energy Limited wiring (Europe) and Dust Ignition Proof
wiring (Europe/International).................................................................................................. 40
5.5.2 FM/CSA Class 1, Div 2 installation and connection drawing................................................. 40
5.6 Instructions specific to hazardous area installations.............................................................. 41
5.6.1 (Reference European ATEX Directive 2014/34/EU, Annex II, 1.0.6) .................................... 41
5.6.2 Special conditions for safe use .............................................................................................. 41
6 Commissioning ..................................................................................................................................... 43
6.1 Basic safety notes.................................................................................................................. 43
6.2 Activating the LR560 note...................................................................................................... 45
6.3 Activating the radar device..................................................................................................... 45
6.4 The LCD display..................................................................................................................... 45
6.5 Device Address ...................................................................................................................... 47
6.6 Commissioning via local display ............................................................................................ 47
6.6.1 Quick Start Wizard via the local display push buttons ........................................................... 48
6.7 Commissioning via handheld programmer ............................................................................ 49
6.7.1 Handheld programmer (Part No. 7ML1930-1BK) .................................................................. 49
6.7.2 Hand programmer_note ......................................................................................................... 49
6.7.3 Lithium batteries..................................................................................................................... 49
6.7.4 Key functions in measurement mode..................................................................................... 50
6.7.5 Programming.......................................................................................................................... 51
6.7.5.1 Parameter menus................................................................................................................... 51
6.7.5.2 Quick Start Wizard via the handheld programmer................................................................. 55
6.7.5.3 Requesting an Echo Profile ................................................................................................... 59
6.8 Application example............................................................................................................... 60
6.8.1 Level application example...................................................................................................... 60
7 Operating.............................................................................................................................................. 61
7.1 Remote operation................................................................................................................... 61
7.1.1 Operating via SIMATIC PDM................................................................................................. 61
7.1.1.1 PDM function overview .......................................................................................................... 61
7.1.1.2 SIMATIC PDM Version .......................................................................................................... 61
7.1.1.3 Updating the Electronic Device Description (EDD)................................................................ 61
7.1.1.4 Configuring a new device....................................................................................................... 62
7.1.1.5 Quick Start wizard via SIMATIC PDM.................................................................................... 63
7.1.1.6 Changing parameter settings using SIMATIC PDM .............................................................. 69
7.1.2 Operating via FDT (field device tool) ..................................................................................... 84
8 Parameter Reference............................................................................................................................ 87
8.1 QUICK START (1.)................................................................................................................. 87

Table of contents
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE 5
8.1.1 QUICK START WIZARD (1.1.) ...............................................................................................88
8.1.2 AFES WIZARD (1.2.) ..............................................................................................................88
8.1.3 COPY PARAMETERS TO DISPLAY (1.3.) ............................................................................90
8.1.4 COPY PARAMETERS FROM DISPLAY (1.4.) ......................................................................90
8.1.5 COPY FIRMWARE TO DISPLAY (1.5.) .................................................................................91
8.1.6 COPY FIRMWARE FROM DISPLAY (1.6.)............................................................................91
8.2 SETUP (2.)..............................................................................................................................92
8.2.1 IDENTIFICATION (2.1) ...........................................................................................................92
8.2.1.1 TAG (2.1.1.) ............................................................................................................................92
8.2.1.2 DESCRIPTOR (2.1.2.)............................................................................................................92
8.2.1.3 MESSAGE (2.1.3.)..................................................................................................................92
8.2.1.4 INSTALLATION DATE (2.1.4.) ...............................................................................................92
8.2.2 DEVICE (2.2.) .........................................................................................................................92
8.2.2.1 HARDWARE REVISION (2.2.1.) ............................................................................................92
8.2.2.2 FIRMWARE REVISION (2.2.2.)..............................................................................................92
8.2.2.3 LOADER REVISION (2.2.3.) ..................................................................................................92
8.2.2.4 MENU TIMEOUT (2.2.4.)........................................................................................................92
8.2.2.5 MANUFACTURE DATE (2.2.5.) .............................................................................................93
8.2.3 SENSOR (2.3.) .......................................................................................................................93
8.2.3.1 UNIT (2.3.1.) ...........................................................................................................................93
8.2.3.2 LEVEL UNIT (2.3.2.) ...............................................................................................................93
8.2.3.3 LOE TIMER (2.3.3.) ................................................................................................................94
8.2.3.4 TEMP UNITS (2.3.4.)..............................................................................................................94
8.2.3.5 CALIBRATION (2.3.5.)............................................................................................................
94
8.2.3.6 RATE (2.3.6.) ..........................................................................................................................96
8.2.4 SIGNAL PROCESSING (2.4.) ................................................................................................98
8.2.4.1 NEAR RANGE (2.4.1.)............................................................................................................98
8.2.4.2 FAR RANGE (2.4.2.)...............................................................................................................98
8.2.4.3 MINIMUM SENSOR VALUE (2.4.3.) ......................................................................................99
8.2.4.4 MAXIMUM SENSOR VALUE (2.4.4.) .....................................................................................99
8.2.4.5 ECHO SELECT (2.4.5.) ........................................................................................................100
8.2.4.6 SAMPLING (2.4.6.) ...............................................................................................................102
8.2.4.7 ECHO LOCK (2.4.6.1.) .........................................................................................................102
8.2.4.8 UP SAMPLING (2.4.6.2.) ......................................................................................................102
8.2.4.9 DOWN SAMPLING (2.4.6.3.) ...............................................................................................102
8.2.4.10 ECHO LOCK WINDOW (2.4.6.4.) ........................................................................................103
8.2.4.11 ECHO QUALITY (2.4.7.).......................................................................................................103
8.2.4.12 TVT SETUP (2.4.8.)..............................................................................................................104
8.2.4.13 TVT SHAPER (2.4.9.)...........................................................................................................105
8.2.5 AIFB1 ....................................................................................................................................106
8.2.5.1 STATIC REVISION NO. (2.5.1.) ...........................................................................................106
8.2.5.2 MODE (2.5.2.).......................................................................................................................106
8.2.5.3 CHANNEL (2.5.3.) ................................................................................................................106
8.2.5.4 LABEL (2.5.4.) ......................................................................................................................107
8.2.5.5 INPUT SCALING (2.5.5.)......................................................................................................107
8.2.5.6 OUTPUT SCALING (2.5.6.)..................................................................................................108
8.2.5.7 ALARMS AND WARNINGS (2.5.7.) .....................................................................................108
8.2.5.8 DISPLAY (2.5.8.) ..................................................................................................................
109
8.2.5.9 FAIL-SAFE (2.5.9.) ...............................................................................................................110
8.2.6 AIFB2 ....................................................................................................................................111
8.2.7 MEASURED VALUES (2.7.).................................................................................................111
8.2.7.1 MEASURED VALUES (2.7.).................................................................................................111

Table of contents
LR560 (PROFIBUS PA)
6Operating Instructions, 06/2018, A5E34648471-AE
8.2.7.2 MAIN OUTPUT (2.7.1.)........................................................................................................ 111
8.2.7.3 OUTPUT NO LINEARIZATION (2.7.2.) ............................................................................... 111
8.2.7.4 OUTPUT NO OFFSETS (2.7.3.).......................................................................................... 111
8.2.8 FILTERING (2.8.)................................................................................................................. 112
8.2.8.1 NARROW ECHO FILTER (2.8.1.) ....................................................................................... 112
8.2.8.2 REFORM ECHO (2.8.2.)...................................................................................................... 112
8.2.8.3 AVERAGE AMOUNT (2.8.3.)............................................................................................... 112
8.3 DIAGNOSTICS (3.).............................................................................................................. 113
8.3.1 ECHO PROFILE (3.1.)......................................................................................................... 113
8.3.2 FAULT RESET (3.2.) ........................................................................................................... 114
8.3.3 TREND (3.3.) ....................................................................................................................... 114
8.3.4 MINIMUM VALUE (3.4.1.).................................................................................................... 114
8.3.5 MAXIMUM VALUE (3.4.2.) .................................................................................................. 115
8.3.6 INTERNAL TEMPERATURE (3.4.3.)................................................................................... 115
8.3.7 CONDENSED STATUS (3.5.) ............................................................................................. 115
8.3.7.1 ENABLE (3.5.1.)................................................................................................................... 115
8.3.7.2 FEATURE SUPPORTED (3.5.2.) ........................................................................................ 116
8.3.7.3 FEATURE ENABLED (3.5.3.) .............................................................................................. 116
8.3.8 EVENT INDEX (3.6.1.)......................................................................................................... 116
8.3.9 EVENT STATUS (3.6.2.) ..................................................................................................... 117
8.3.10 EVENT DIAGNOSIS (3.6.3.)................................................................................................ 118
8.3.11 PEAK VALUES (3.7.)........................................................................................................... 118
8.3.12 MINIMUM MEASURED VALUE (3.7.1.) .............................................................................. 119
8.3.13 MAXIMUM MEASURED VALUE (3.7.2.)............................................................................. 119
8.4 SERVICE (4.) ....................................................................................................................... 119
8.4.1 DEMO MODE (4.1.) ............................................................................................................. 119
8.4.2 MASTER RESET (4.2.)........................................................................................................ 120
8.4.3 POWERED HOURS (4.3.) ................................................................................................... 120
8.4.4 POWERON RESETS (4.4.) ................................................................................................. 121
8.4.5 LCD BACKLIGHT (4.5.) ....................................................................................................... 121
8.4.6 LCD CONTRAST (4.6.)........................................................................................................ 121
8.4.7 REMAINING DEVICE LIFETIME (4.7.) ............................................................................... 122
8.4.7.1 LIFETIME EXPECTED (4.7.1.) ............................................................................................ 122
8.4.7.2 TIME IN OPERATION (4.7.2.) ............................................................................................. 123
8.4.7.3 REMAINING LIFETIME (4.7.3.) ........................................................................................... 123
8.4.7.4 REMINDER ACTIVATION (4.7.4.)....................................................................................... 123
8.4.7.5 REMINDER 1 (REQUIRED) (4.7.5.) .................................................................................... 123
8.4.7.6 REMINDER 2 (DEMANDED) (4.7.6.) .................................................................................. 123
8.4.7.7 MAINTENANCE STATUS (4.7.7.) ....................................................................................... 123
8.4.7.8 ACKNOWLEDGE STATUS (4.7.8.) ..................................................................................... 124
8.4.7.9 ACKNOWLEDGE (4.7.9.) .................................................................................................... 124
8.4.8 REMAINING SENSOR LIFETIME (4.8.).............................................................................. 124
8.4.8.1 REMAINING SENSOR LIFE (4.8.) ...................................................................................... 124
8.4.8.2 LIFETIME EXPECTED (4.8.1.) ............................................................................................ 125
8.4.8.3 TIME IN OPERATION (4.8.2.) ............................................................................................. 125
8.4.8.4 REMAINING LIFETIME (4.8.3.) ........................................................................................... 125
8.4.8.5 REMINDER ACTIVATION (4.8.4.)....................................................................................... 125
8.4.8.6 REMINDER 1 (REQUIRED) (4.8.5.) .................................................................................... 126
8.4.8.7 REMINDER 2 (DEMANDED) (4.8.6.) .................................................................................. 126
8.4.8.8 MAINTENANCE STATUS (4.8.7.) ....................................................................................... 126
8.4.8.9 ACKNOWLEDGE STATUS (4.8.8.) ..................................................................................... 126

Table of contents
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE 7
8.4.8.10 ACKNOWLEDGE (4.8.9.) .....................................................................................................126
8.4.9 SERVICE SCHEDULE (4.9.) ................................................................................................127
8.4.9.1 SERVICE SCHEDULE (4.9.) ................................................................................................127
8.4.9.2 SERVICE INTERVAL (4.9.1.) ...............................................................................................127
8.4.9.3 TIME SINCE LAST SERVICE (4.9.2.)..................................................................................128
8.4.9.4 TIME UNTIL NEXT SERVICE (4.9.3.) ..................................................................................128
8.4.9.5 REMINDER ACTIVATION (4.9.4.)........................................................................................128
8.4.9.6 REMINDER 1 (REQUIRED) (4.9.5.).....................................................................................128
8.4.9.7 REMINDER 2 (DEMANDED) (4.9.6.) ...................................................................................129
8.4.9.8 MAINTENANCE STATUS (4.9.7.) ........................................................................................129
8.4.9.9 ACKNOWLEDGE STATUS (4.9.8.)......................................................................................129
8.4.9.10 ACKNOWLEDGE (4.9.9.) .....................................................................................................129
8.4.10 CALIBRATION SCHEDULE (4.10.)......................................................................................130
8.4.10.1 CALIBRATION SCHEDULE (4.10.)......................................................................................130
8.4.10.2 CALIBRATION INTERVAL (4.10.1.).....................................................................................130
8.4.10.3 TIME SINCE LAST CALIBRATION (4.10.2.)........................................................................131
8.4.10.4 TIME UNTIL NEXT CALIBRATION (4.10.3.)........................................................................131
8.4.10.5 REMINDER ACTIVATION (4.10.4.)......................................................................................131
8.4.10.6 REMINDER 1 (REQUIRED) (4.10.5.)...................................................................................131
8.4.10.7 REMINDER 2 (DEMANDED) (4.10.6.) .................................................................................132
8.4.10.8 MAINTENANCE STATUS (4.10.7.) ......................................................................................132
8.4.10.9 ACKNOWLEDGE STATUS (4.10.8).....................................................................................132
8.4.10.10 ACKNOWLEDGE (4.10.9.) ...................................................................................................132
8.4.11 STORED SOFTWARE VERSION (4.11.).............................................................................
132
8.5 COMMUNICATION (5.) ........................................................................................................133
8.5.1 DEVICE ADDRESS (5.1.).....................................................................................................133
8.5.2 PROFIBUS IDENTIFICATION (5.2.) ....................................................................................133
8.6 SECURITY (6.) .....................................................................................................................134
8.6.1 REMOTE LOCKOUT (6.1.1.)................................................................................................134
8.6.2 WRITE PROTECT (6.2.1.)....................................................................................................134
8.7 LANGUAGE (7.)....................................................................................................................134
8.7.1 LANGUAGE (7.)....................................................................................................................134
9 Service and maintenance.................................................................................................................... 135
9.1 Basic safety notes.................................................................................................................135
9.1.1 Maintenance .........................................................................................................................135
9.2 Cleaning................................................................................................................................136
9.3 Maintenance and repair work ...............................................................................................137
9.4 Return procedure ..................................................................................................................138
9.5 Disposal ................................................................................................................................139
10 Diagnosing and troubleshooting .......................................................................................................... 141
10.1 Device status icons ...............................................................................................................141
10.2 General fault codes...............................................................................................................142
10.3 Operation troubleshooting ....................................................................................................145
10.4 Communication troubleshooting ...........................................................................................146
11 Technical data .................................................................................................................................... 149

Table of contents
LR560 (PROFIBUS PA)
8Operating Instructions, 06/2018, A5E34648471-AE
11.1 POWER................................................................................................................................ 149
11.2 Performance......................................................................................................................... 149
11.3 Construction ......................................................................................................................... 150
11.4 Operating conditions ............................................................................................................ 150
11.5 Process ................................................................................................................................ 151
11.6 Communication: Profibus PA ............................................................................................... 151
11.7 Approvals data ..................................................................................................................... 152
11.8 Programmer (infrared keypad)............................................................................................. 153
12 Dimension drawings.............................................................................................................................155
12.1 SITRANS LR560 with stainless steel universal flat-faced flange ........................................ 155
12.2 SITRANS LR560 with 3" aimer flange ................................................................................. 156
12.3 SITRANS LR560 with 4" and 6" aimer flange...................................................................... 157
12.4 SITRANS LR560 with stamped flange................................................................................. 159
12.5 Universal slotted flange........................................................................................................ 160
12.6 Stamped flange.................................................................................................................... 162
12.7 Process connection label (pressure rated versions)............................................................ 163
A Technical reference .............................................................................................................................165
A.1 Technical reference ............................................................................................................. 165
A.2 Principles of operation ......................................................................................................... 165
A.3 Process variables................................................................................................................. 165
A.4 Echo processing................................................................................................................... 166
A.4.1 Process Intelligence............................................................................................................. 166
A.4.2 Echo selection...................................................................................................................... 166
A.4.3 CLEF RANGE (2.4.5.4.)....................................................................................................... 169
A.4.4 ECHO THRESHOLD (2.4.5.3.) ............................................................................................ 169
A.4.5 ECHO LOCK (2.4.6.1.) ........................................................................................................ 169
A.4.6 AUTO FALSE ECHO SUPPRESSION (2.4.8.1.)................................................................. 169
A.4.7 Measurement range............................................................................................................. 171
A.5 Measurement response ....................................................................................................... 172
A.6 Damping............................................................................................................................... 172
A.7 Loss of Echo (LOE).............................................................................................................. 173
A.7.1 Loss of Echo (LOE).............................................................................................................. 173
A.7.2 Fail-safe Behavior ................................................................................................................ 173
A.7.3 Mode .................................................................................................................................... 173
A.7.4 Value .................................................................................................................................... 174
A.8 Loop power .......................................................................................................................... 174
A.8.1 Temperature De-Rating ....................................................................................................... 174
B PROFIBUS PA profile structure............................................................................................................177
B.1 PROFIBUS Level Device Design......................................................................................... 177

Table of contents
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE 9
B.2 Block Model ..........................................................................................................................177
B.3 Transducer Block function groups ........................................................................................178
B.4 How the transducer block works:..........................................................................................178
B.5 Analog Input Function Blocks 1 and 2 ..................................................................................179
B.6 Output conversion.................................................................................................................180
B.7 Device/input simulation.........................................................................................................180
B.8 Analog Input Function Block function groups (simulation, mode and status).......................180
B.9 How an Analog Input Function Block works .........................................................................181
B.10 AIFB function groups ............................................................................................................181
C Communications via PROFIBUS PA ................................................................................................... 183
C.1 Device configuration tool ......................................................................................................183
C.2 SIMATIC PDM ......................................................................................................................183
C.3 Electronic Device Description ...............................................................................................183
C.4 Network configuration ...........................................................................................................183
C.5 The GSD file .........................................................................................................................183
C.6 Bus termination .....................................................................................................................184
C.7 Power demands ....................................................................................................................184
C.8 PROFIBUS address..............................................................................................................184
C.9 Operating as a profile device ................................................................................................185
C.10 Configuring a new device .....................................................................................................185
C.11 Configuring PROFIBUS PA with an S7-300/ 400 PLC .........................................................185
C.12 Cyclic versus acyclic data.....................................................................................................185
C.13 Cyclic data ............................................................................................................................186
C.14 Status byte ............................................................................................................................186
C.15 Condensed status .................................................................................................................187
C.16 Diagnostics ...........................................................................................................................189
C.17 Diagnosis reply (available cyclically) ....................................................................................189
C.18 Diagnosis object (available cyclically or acyclically).............................................................190
C.19 Extended mode diagnosis ....................................................................................................190
C.20 Condensed mode diagnosis .................................................................................................191
C.21 Acyclic extended diagnostics (general fault codes)..............................................................191
C.22 Acyclic data...........................................................................................................................193
D Certificates and Support...................................................................................................................... 195
D.1 Technical support..................................................................................................................195
D.2 QR code label .......................................................................................................................195

Table of contents
LR560 (PROFIBUS PA)
10 Operating Instructions, 06/2018, A5E34648471-AE
D.3 Certificates ........................................................................................................................... 196
E HMI menu structure .............................................................................................................................197
E.1 HMI menu............................................................................................................................. 197
F List of abbreviations .............................................................................................................................203
F.1 List of abbreviations ............................................................................................................. 203
Glossary ..............................................................................................................................................205
Index ...................................................................................................................................................211

LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE 11
Introduction
1
1.1
LR560 PROFIBUS PA manual usage
Note
This manual applies to the SITRANS LR56
0 (PROFIBUS PA) version only.
1.2
Purpose of this documentation
These instructions contain all information required to commission and use the device. Read
the instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
1.3
Checking the consignment
1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
•Do not use damaged or incomplete devices.

Introduction
1.4 Security information
LR560 (PROFIBUS PA)
12 Operating Instructions, 06/2018, A5E34648471-AE
1.4
Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions only form one element of such a concept.
Customer is responsible to prevent unauthorized access to its plants, systems, machines
and networks. Systems, machines and components should only be connected to the
enterprise network or the internet if and to the extent necessary and with appropriate security
measures (e.g. use of firewalls and network segmentation) in place.
Additionally, Siemens’ guidance on appropriate security measures should be taken into
account. For more information about industrial security, please visit:
http://www.siemens.com/industrialsecurity
Siemens’ products and solutions undergo continuous development to make them more
secure. Siemens strongly recommends to apply product updates as soon as available and to
always use the latest product versions. Use of product versions that are no longer supported,
and failure to apply latest updates may increase customer’s exposure to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS
Feed under:
http://www.siemens.com/industrialsecurity
1.5
Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
●Keep the original packaging for subsequent transportation.
●Devices/replacement parts should be returned in their original packaging.
●If the original packaging is no longer available, ensure that all shipments are properly
packaged to provide sufficient protection during transport. Siemens cannot assume
liability for any costs associated with transportation damages.
NOTICE
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
•Provide additional packaging as necessary.
Special conditions for storage and transportation of the device are listed in Technical data
(Page 149).

Introduction
1.6 Notes on warranty
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE 13
1.6
Notes on warranty
The contents of this manual shall not become part of or modify any prior or existing
agreement, commitment or legal relationship. The sales contract contains all obligations on
the part of Siemens as well as the complete and solely applicable warranty conditions. Any
statements regarding device versions described in the manual do not create new warranties
or modify the existing warranty.
The content reflects the technical status at the time of publishing. Siemens reserves the right
to make technical changes in the course of further development.
1.7
Firmware revision history
Firmware revision
EDD revision
Date (dd/mm/yyyy)
Changes
1.00.00
1.00.00
May 2010
Initial release
1.00.02-06 1.00.02-06 Nov 2011 Maintenance release
1.00.01-14
1.00.02-10
March 2012
Maintenance release
1.00.02-14
1.00.03-01
April 2015
Maintenance release

Introduction
1.7 Firmware revision history
LR560 (PROFIBUS PA)
14 Operating Instructions, 06/2018, A5E34648471-AE

LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE 15
Safety notes
2
2.1
Preconditions for use
This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
2.1.1
Safety marking symbols
In manual
On product
Description
(Label on product:
yellow back-
ground.)
WARNING: refer to accompanying documents (manual) for
details.
2.1.2
Improper device modifications
WARNING
Improper device modifications
Risk to personnel, system and environment can result from modifications to the device,
particularly in hazardous areas.
•Only carry out modifications that are described in the instructions for the device. Failure
to observe this requirement cancels the manufacturer's warranty and the product
approvals.

Safety notes
2.1 Preconditions for use
LR560 (PROFIBUS PA)
16 Operating Instructions, 06/2018, A5E34648471-AE
2.1.3
Laws and directives
Observe the safety rules, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
●National Electrical Code (NEC - NFPA 70) (USA)
●Canadian Electrical Code (CEC) (Canada)
Further provisions for hazardous area applications are for example:
●IEC 60079-14 (international)
●EN 60079-14 (EU)
2.1.4
Conformity with European directives
The CE marking on the device symbolizes the conformity with the following European
directives:
Electromagnetic compatibi
l-
ity EMC
2014/30/EU
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member
States relating to ele
c-
tromagnetic compatibility
Low voltage directive LVD
2014/35/EU
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of electri
cal equipment de-
signed for use within certain voltage limits
Atmosphère explosible
ATEX
2014/34/EU
Directive of the European Parliament and the Council on the
harmonisation of the laws of the Member States relating to
equipment and protective systems int
ended for use in potential-
ly explosive atmospheres
Pressure equipment d
i-
rective PED
2014/68/EU
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of pressure equipment
RED
2014/53/EU
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of radio equipment and repea
l-
ing Directive 1999/5/EC
The applicable directives can be found in the EC conformity declaration of the specific
device.

Safety notes
2.1 Preconditions for use
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE 17
2.1.5
Radio Equipment Directive (RED) compliance (Europe)
Hereby, Siemens declares that the SITRANS LR560 is in compliance with the essential
requirements and other relevant provisions of Directive 2014/53/EU.
The LR560 complies with EN 302 372 for use in closed storage vessels, when installed
according to the installation requirements of EN 302 372, and may be used in all EU
countries.
For the receiver test that covers the influence of an interferer signal to the device, the
performance criterion has at least the following level of performance according to ETSI TS
103 361 [6]:
●Performance criterion: measurement value variation Δd over time during a distance
measurement
●Level of performance: Δd ≤ ±50 mm
The LR560 complies with ETSI EN 302 729 for use outside of closed tanks in most EU
countries. (For a list of exceptions, see the LR560 Declaration to EN 302 729, which can be
accessed online here (www.siemens.com/LR560).) For open air installations, the following
conditions must be observed:
●Installation and maintenance is performed by suitably qualified and trained personnel.
●The LR560 shall be installed only in a permanent fixed position pointing downwards. Its
location shall comply with the following two restrictions:
–It shall be installed with a minimum separation distance of 4 km from radio astronomy
sites listed here (http://www.craf.eu/radio-observatories-in-europe/) unless special
authorization has been provided by the responsible national regulatory authority.
–If it is installed at a location between 4 and 40 km from any radio astronomy site listed
here (http://www.craf.eu/radio-observatories-in-europe/), the LR560 shall be installed
at a height not exceeding 15m from the ground.
2.1.6
Federal Communications Commission (FCC) conformity (US)
US Installations only: Federal Communications Commission (FCC) rules
●This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
●This device has also been tested and found to comply with the limits §15.256, Subpart C-
Intentional radiators, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.

Safety notes
2.2 Use in hazardous areas
LR560 (PROFIBUS PA)
18 Operating Instructions, 06/2018, A5E34648471-AE
●This device generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to
radio communications, in which case the user will be required to correct the interference
at his/her own expense.
●This device may be used to measure levels in open air environments or outside enclosed
tanks, subject to the following conditions:
–Devices shall be installed and maintained to ensure a vertically downward orientation
of the transmit antenna's main beam.
–Devices shall be installed only at fixed locations. Devices shall not operate while being
moved or while inside a moving container.
–Hand-held applications and residential use are prohibited.
2.1.7
Industry Canada
The SITRANS LR560 complies with Industry Canada standard RSS211 (March 2015).
1. The installation of the SITRANS LR560 shall be done by trained installers, in strict
compliance with the manufacturer's instructions.
2. The use of this device is on a “no-interference, no-protection” basis. That is, the user shall
accept operations of high-powered radar in the same frequency band which may interfere
with or damage this device. However, devices found to interfere with primary licensing
operations will be required to be removed at the user’s expense.
3. The installer/user of this device shall ensure that it is at least 10 km from the Penticton
radio astronomy station (British Columbia latitude: 49° 19' 12" N, longitude: 119° 37'12"
W). For devices not meeting this 10 km separation (e.g. the Okanagan Valley, British
Columbia) the installer/ user must coordinate with and obtain the written concurrence of
the Director of the Penticton radio astronomy station before the equipment can be
installed or operated. The Director of the DRAO may be contacted at 250-497-2300 or at
[e-mail]. (Alternatively, the Manager, Regulatory
Standards, Industry Canada, may be contacted.)
2.2
Use in hazardous areas
Qualified personnel for hazardous area applications
Persons who install, connect, commission, operate, and service the device in a hazardous
area must have the following specific qualifications:
●They are authorized, trained or instructed in operating and maintaining devices and
systems according to the safety regulations for electrical circuits, high pressures,
aggressive, and hazardous media.
●They are authorized, trained, or instructed in carrying out work on electrical circuits for
hazardous systems.
●They are trained or instructed in maintenance and use of appropriate safety equipment
according to the pertinent safety regulations.

Safety notes
2.3 Requirements for special applications
LR560 (PROFIBUS PA)
Operating Instructions, 06/2018, A5E34648471-AE 19
WARNING
Use in hazardous area
Risk of explosion.
•Only use equipment that is approved for use in the intended hazardous area and
labelled accordingly.
•Don't use devices that have been operated outside the conditions secified for hazardous
areas. If you have used the device outside the conditions for hazardous areas
permanently make all Ex markings unrecognizable on the nameplate.
2.3
Requirements for special applications
Due to the large number of possible applications, each detail of the described device
versions for each possible scenario during commissioning, operation, maintenance or
operation in systems cannot be considered in the instructions. If you need additional
information not covered by these instructions, contact your local Siemens office or company
representative.
Note
Operation under special ambient conditions
We highly recommend that you contact your Siemens represe
ntative or our application
department before you operate the device under special ambient conditions as can be
encountered in nuclear power plants or when the device is used for research and
development purposes.