Signature Hardware 428473 User manual

Installation
RAPIDCONNECT TUB DRAIN INSTALLATION
GETTING STARTED
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing plumbing fixtures. Signature
Hardware accepts no liability for any damage to the floor,
drain, tub, or for personal injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the faucet for shipping damage. If
any damage is found, contact our Customer Relations
team at 1-866-855-2284.
Ensure that you have gathered all the required
materials that are needed for the installation.
TOOLS AND MATERIALS:
1. Use the provided sub-floor cutout template to cut a
5” diameter hole into the wood sub-floor, centered above
the prepared P-Trap.
1RapidConnect Tub Drain Installation Instructions
2. Connect the drain assembly to the prepared P-Trap
below the floor. Secure the drain to the sub-floor with 5
screws (not supplied).
1-3/4” Screws
(x5)
Lubricant
(provided)
5”
Drill
P-Trap
Long-nose Pliers
SKU(s): 428473

RAPIDCONNECT TUB DRAIN INSTALLATION
2RapidConnect Tub Drain Installation Instructions
2.5 ”
3. Complete the installation of the finished floor, leaving
a 2.5” opening to access the drain.
4. Remove the plug from the drain using long-nose
pliers. The plug may need to be rocked back and forth to
loosen from the drain. Do not twist, which can loosen
the entire drain assembly.
5. Apply the provided lubricant to the tailpiece of the
tub drain. Lower the tub into position and insert the
tailpiece into the Rapid Connect drain assembly. Press
firmly into place to ensure that a tight seal is made.
Drain
Tailpiece