SIIG AV-GM01Q3-S1DS User manual

Dual-View Universal Video to
DVI-I Scaler
P/N: AV-GM01Q3-S1DS

Safety and Notice
The AV-GM01Q3-S1DS Dual-View Universal Video to DVI-I scaler has been tested for
conformance
to safety regulations and requirements, and has been certified for international use. However,
like all electronic equipments, the AV-GM01Q3-S1DS should be used with care. Please read and
follow the
safety instructions to protect yourself from possible injury and to minimize the risk of damage to
the unit.
●Follow all instructions and warnings marked on this unit.
●Do not attempt to service this unit yourself, except where explained in this manual.
●Provide proper ventilation and air circulation and do not use near water.
●Keep objects that might damage the device and assure that the placement of this unit is on a
stable surface.
●Use only the power adapter and power cords and connection cables designed for this unit.
●Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the
device before cleaning.
TABLE OF CONTENTS
INTRODUCTION................................................................................................................1
FEATURES.........................................................................................................................1
PACKAGE CONTENTS......................................................................................................1
SPECIFICATIONS..............................................................................................................2
IR REMOTE CONTROL......................................................................................................3
PANEL DESCRIPTIONS ....................................................................................................5
HARDWARE INSTALLATION.............................................................................................6
DEFAULT SETTING...........................................................................................................6
NOTICE..............................................................................................................................6
IR CONTROL TREE...........................................................................................................7
SOFTWARE PROCEDURE..............................................................................................11
CONNECTION DIAGRAM................................................................................................13
WARRANTY.....................................................................................................................14

1
INTRODUCTION
The AV-GM01Q3-S1DS Dual-View Universal Video to DVI-I scaler offers the highest
compatibility among composite, component, DVI, VGA, HDMI and S-Video to DVI in the
market. This unique device supports analog and digital conversion and scaling without loss
of quality. With the embedded advanced de-interlacer, interlaced video inputs, such as
component, composite and S-Video, can be further improved. The wide range video
support in both input and output can be up to WUXGA or 1080p.
AV-GM01Q3-S1DS is designed to ease the conversion among the available video
formats with affordable cost. With AV-GM01Q3-S1DS, the bothersome video format issues
will not become a bottleneck in your applications. With versatile IR remote control,
AV-GM01Q3-S1DS offers a very easy way to convert, switch, adjust videos at your
convenience. With PIP and PAP support, users can display two video inputs at the same
time!
FEATURES
HDMI and DVI 1.0 compliant
Scales up and down VESA compliant formats (VGA and DVI)
Scales SD/ED/HD video inputs to VESA compliant formats
PIP and PAP support
Advanced video processing supports: noise reduction, color management, fleshtone
control, dynamic contrast control, closed caption support for CVBS, 3-D de-interlacing,
3:2/2:2 pull down detection and recovery
RS-232 Firmware upgradable to guarantee the functionality revised
Equivalent to 4x1 video switch
Video output supports up to WUXGA, UXGA or 1080p
DVI outputs
Versatile IR control
Software controllable & serial protocal available.
Supports zoom, crop & TV wall application
Portable size
PACKAGE CONTENTS
1 × AV-GM01Q3-S1DS
1 × DC 5V 4A adapter
1 × VGA to component breakout cable
1 × Composit&S-video breakout cable
1 × DVI to VGA adapter
1 × IR Remote control
1 × Installation software CD
1 × User Manual

2
SPECIFICATIONS
Model Name
AV-GM01Q3-S1DS
Technical
Role of usage
Video scaling & format converter
HDMI & HDCP
Compliance
HDMI & HDCP 1.1
Digital video bandwidth
4.95 Gbps
Analog video
bandwidth
165 MHz
Maximum resolution
1080p60 / 1920x1200@60
Input TMDS signal
1.2 Volts [peak-to-peak]
Input DDC signal
5 Volts [peak-to-peak, TTL]
Input
1x HDMI + 1x CVBS + 1x S-Video + 1x VGA + 1x YPbPr + 1x DVI
Output
1x DVI
PIP / PAP
YES
ESD protection
[1] Human body model —19kV [air-gap discharge] & 12kV [contact
discharge]
[2] Core chipset —2kV
PCB stack-up
6-layer board [impedance control —differential 100Ω; single 50Ω]
IR remote control
Electro-optical characteristics: π= 25° / Carrier frequency: 38 kHz
DVI connector
DVI-I [29-pin female]
RS-232 connector
DE-9 [9-pin D-sub female]
RCA connector
9 pin S-Video, Composite, and S / PDIF
DIP switch
2-pin for reset
Mechanical
Housing
Metal enclosure
Dimension
s
[L x W x H]
Model
125 x 165 x 28mm [5” x 6.5” x 1.1”]
Package
330 x 200 x 95mm [1’1” x 7.9” x 3.7”]
Carton
495 x 440 x 380mm [1’8” x 1’5” x 1’3”]
Weight
Model
485g [1.1 lbs]
Package
1360g [3.1 lbs]
Fixedness
Wall-mounting case with screws
Power supply
Interlocked 5V 4A DC
Power consumption
15 Watts [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]

3
IR REMOTE CONTROL
Menu Control Buttons
Exit OSD
Menu On
dle
PIP/PAP Menu
Sleep ON
Freeze Video
Source: Sequential source switch
Info: Display input type and time
Auto: Auto adjustment for VGA input
C.C.:No use in this model
HDMI:No use in this model
Aspect: Aspect ratio change
TV: No use in this model
CV1: Composite
CV2.:No use in this model
YUV1.:No use in this model
YUV2:No use in this model
SV1: S-Video
SV2: No use in this model
VGA: VGA
DV1: DVI / HDMI
F1: No use in this model
F2: Display input timing
F3: Auto color balance

4
The buttons not listed above are not in use for this model.

5
PANEL DESCRIPTIONS
Front Panel
1. IR: IR sensor
2. DVI: DVI & VGA output
3. RS-232: Firmware update and future software control
Rear Panel
4. Power: +5V DV latch-locking
5. PS2: S-Video/Composite input
6. DVI: HDMI/DVI/Component/VGA input
7. LED: Indicates power up, idle, no signal

6
HARDWARE INSTALLATION
1. Connect your video sources to the input connectors.
2. Connect your HDMI, or DVI enabled monitors into the device's DVI-D output port.
3. Power up the AV-GM01Q3-S1DS.
4. Use IR to select the input, setup the output resolution, and adjust your video format
DEFAULT SETTING
1. Power up the AV-GM01Q3-S1DS.
2. To reset AV-GM01Q3-S1DS back to the factory default values, pull up-and-down the DIP switch 1
& 2 from OFF to ON to complete the process. You NEED to pull back the DIP switch back to OFF
in order to get AV-GM01Q3-S1DS work normally.
NOTICE
1. As the video formats evolves and expands, AV-GM01Q3-S1DS is firmware upgradable for this
fashion.
2. PIP and PAP only support digital and analog display or dual display for single input.

7
IR CONTROL TREE

8

9

10

11
SOFTWARE PROCEDURE
1. Setting
2. System
IR Simulation
Select the correct ComPort
connected to the device.
Push “Scan” to start the
automatic scan on each.
Cutting Function
Update the status
from the device
to software.
Main Function

12
3. Display Control
4. Firmware Update
Display Mode
1. Press this button first
2. Reboot the device to proceed firmware updating
3. Reboot the device again

13
CONNECTION DIAGRAM

14
WARRANTY
The SELLER warrants the AV-GM01Q3-S1DS Dual-View Universal Video to DVI-I scaler
free from defects in the material and workmanship for 3 years from the date of purchase
from the SELLER or an authorized dealer. Should this product fail to be in good working
order within 3 years warranty period, The SELLER, at its option, repair or replace the unit,
provided that the unit has not been subjected to accident, disaster, abuse or any
unauthorized modifications including static discharge and power surge. This warranty is
offered by the SELLER for its BUYER with direct transaction only. This warranty is void if the
warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the
current price of parts and labor in effect at the time of repair. Such repairs are warranted
for 90 days from the day of reshipment to the BUYER. If the unit is delivered by mail,
customers agree to insure the unit or assume the risk of loss or damage in transit. Under
no circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without
limitations, any other implied warranty or fitness or merchantability for any particular
purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan
are responsible for shipping charges to and from the SELLER. Cables and power adapters
are limited to a 30 day warranty and must be free from any markings, scratches, and neatly
coiled.
The content of this manual has been carefully checked and is believed to be accurate.
However, The SELLER assumes no responsibility for any inaccuracies that may be
contained in this manual. The SELLER will NOT be liable for direct, indirect, incidental,
special, or consequential damages resulting from any defect or omission in this manual,
even if advised of the possibility of such damages. Also, the technical information
contained herein regarding the AV-GM01Q3-S1DS features and specifications is subject to
change without further notice
April, 2018
Support
For more info or tech support
http://www.siig.com/support