Silvercrest SHBD 600 A1 Product information sheet

V1.21
English...................................................................................................... 2
Ελληνικά ................................................................................................ 20
Deutsch .................................................................................................. 41

SilverCrest SHBD 600 A1
2 - English
Table of contents
1. Intended use.............................................................................................. 3
2. Package contents ...................................................................................... 4
3. Technical data ........................................................................................... 5
4. Safety instructions ..................................................................................... 5
5. Copyright ................................................................................................ 10
6. Before initial use...................................................................................... 10
6.1. Charging the battery........................................................................................................... 10
6.2. Accessories.......................................................................................................................... 11
6.2.1. Scissors (7)................................................................................................................... 11
6.2.2. Comb (8)...................................................................................................................... 11
6.2.3. Blade oil (9) ................................................................................................................. 11
6.2.4. Cleaning brush (10) .................................................................................................... 11
6.2.5. Thinning attachment (11) ............................................................................................ 11
6.2.6. Comb attachments (12) .............................................................................................. 11
7. Initial use................................................................................................. 12
7.1. Cutting hair .......................................................................................................................... 12
7.2. Contour cutting.................................................................................................................... 14
7.3. Beard trimming .................................................................................................................... 14
8. Cleaning/maintenance ............................................................................ 14
8.1. Cleaning .............................................................................................................................. 14
8.2. Maintenance ....................................................................................................................... 16
8.3. Storing the device when not in use/travel lock................................................................. 16
9. Troubleshooting ...................................................................................... 16
9.1. The hair & beard trimmer doesn’t seem to be working .................................................... 16
9.2. I’m not happy with the result of the cut.............................................................................. 16
10. Environmental and waste disposal information..................................... 17
11. Marks of conformity.............................................................................. 17
12. Notes on guarantee and service............................................................ 18

SilverCrest SHBD 600 A1
English - 3
Congratulations!
By purchasing the SilverCrest SHBD 600 A1 hair & beard trimmer, hereinafter referred to as
hair & beard trimmer, you have opted for a high-quality, durable product.
These operating instructions contain important information regarding the safe use of this hair &
beard trimmer as well as details on its day-to-day use and its disposal. Carefully familiarise
yourself with these operating instructions before using the hair & beard trimmer and use it only
for the application areas and purposes described. If you give the hair & beard trimmer away or
sell it, please ensure that you also pass on these operating instructions. They are part of the
product.
1. Intended use
This hair & beard trimmer is simple to use and intended only for cutting/trimming human body
hair. Use the device on dry hair only.
This hair & beard trimmer is not intended for business or commercial use. Use the hair & beard
trimmer solely for private purposes; any other use is deemed improper. In addition, the hair &
beard trimmer must not be used outside of closed rooms or in regions with a tropical climate.
Use the hair & beard trimmer solely for the purposes illustrated in these operating instructions.
Only use the accessories recommended by the manufacturer. Use of accessories not
recommended may cause permanent damage to the device. This may invalidate your
guarantee.
The hair & beard trimmer meets all relevant standards and directives specified in the EU
Declaration of Conformity. Compliance with these standards is no longer guaranteed if a
change is made to the hair & beard trimmer without the authorisation of the manufacturer. The
manufacturer shall not be liable for any damages or faults arising as a result.
Please observe the national regulations and/or laws of the country in which the device is used.

SilverCrest SHBD 600 A1
4 - English
2. Package contents
SilverCrest SHBD 600 A1 hair & beard trimmer
Six comb attachments
Thinning attachment
Scissors
Comb
Cleaning brush
Blade oil
Mains adapter
These operating instructions
These operating instructions also have a cover that can be unfolded. The inside of the cover
provides a schematic of the hair & beard trimmer and a number legend. The numbers identify
the following parts/functions:
1 Blade block
2 Cutting length adjustment switch (0.8 mm, 1.5 mm 2.2 mm, 2.8 mm)
3 On/Off button
4 Display
Remaining battery capacity display as percentage
Display of ‘oil’ maintenance icon, indicating when the blade block (1) needs
cleaning or oiling.
5 Mains adapter port
6 Mains adapter
7 Scissors
8 Comb
9 Blade oil
10 Cleaning brush
11 Thinning attachment
12 Comb attachments
(4–6 mm, 7–9 mm, 10–12 mm, 16–18 mm, 22–24 mm, 28–30 mm)

SilverCrest SHBD 600 A1
English - 5
3. Technical data
Hair & beard trimmer
Model SilverCrest SHBD 600 A1
Input voltage/current 5 V (DC voltage), 1A
Operating temperature 5°C to 35°C
Storage conditions 0°C to 50°C
Please note: The device must not be stored in hot
areas (for example, in vehicles in the summer)
Rechargeable battery Li-ion 3.2 V / 600 mAh
Charging time approx. 60 minutes
Operating time with fully charged
battery approx. 60 minutes
Dimensions approx. 190 x 46 x 53 mm
Weight (excluding accessories) Approx. 200 g
Mains adapter (6)
Manufacturer Shenzhen Kuanten Limited
Model KT05W050100BSD
Input voltage/current/frequency 100–240 V (AC voltage) 0.2 A, 50/60 Hz
Output voltage, output current 5 V (DC voltage), 1 A
Protection class II
The specifications and design are subject to change without notice.
4. Safety instructions
Before using the hair & beard trimmer for the first time, read
the following instructions carefully and observe all warnings,
even if you are familiar with using electronic devices. Keep
these operating instructions in a safe place for future
reference.
DANGER! This symbol, in conjunction with the word
‘Danger’, indicates an impending dangerous situation
which, if not prevented, may lead to serious injuries
or even death.

SilverCrest SHBD 600 A1
6 - English
WARNING! This icon, in conjunction with the word
‘Warning’, indicates important information for the
safe operation of the hair & beard trimmer and user
safety.
This icon indicates that the hair & beard trimmer
cannot be cleaned off under running water.
A short circuit-proof isolation transformer is built into
the mains adapter of the hair & beard trimmer.
This icon indicates that further information on the
topic is available.
Operating environment
The hair & beard trimmer is designed for operation in rooms
with high humidity (for example, bathroom) but not in rooms
with excessive dust. Operating temperature and operating
humidity: 5°C to 35°C, max. 85% relative humidity.
The mains adapter (6) is only suitable for use in
indoor rooms.
DANGER! The hair & beard trimmer must only be
used with the mains adapter (6) provided.
RISK to children
This hair & beard trimmer can be used by children aged
three and over, as well as by people with reduced physical
sensory or mental abilities or who lack experience and/or
knowledge, providing they are supervised or have been

SilverCrest SHBD 600 A1
English - 7
instructed in the safe use of the device and understand the
resulting dangers. Children must not play with the hair &
beard trimmer. Cleaning and user maintenance may not be
performed by children, unless they are supervised. Small
parts can be lethal if swallowed. Also keep the packaging
film away from children. There is a risk of suffocation.
RISK of electric shock
Keep the hair & beard trimmer dry and protect it from
moisture and dripping or splashing water.
Never use the hair & beard trimmer with wet hands.
Do not immerse the hair & beard trimmer or mains adapter
(6) in water or other liquids and do not rinse off under
running water.
If the hair & beard trimmer falls into water, you must first
remove the mains adapter (6) from the socket before
taking the device out of the water. Do not continue using
the hair & beard trimmer. Get it checked by a
professional.
If you use the hair & beard trimmer in the bathroom,
remove the plug after use. Close proximity to water
represents a hazard, even when the device has been
switched off.
If the hair & beard trimmer or mains adapter (6) is visibly
damaged, the device must not be put into operation.

SilverCrest SHBD 600 A1
8 - English
The mains adapter (6) can only be connected to a
properly installed power socket, which is always easily
accessible. The voltage of the power socket must comply
with the voltage specified on the rating plate.
Always remove the mains adapter (6) from the socket
after use, after charging, in the event of a malfunction and
before cleaning commences.
DANGER of fire
The hair & beard trimmer is not intended for operation
with an external timer or a separate remote control system.
If you notice any smoke, unusual noises or smells,
immediately switch off the device and remove the mains
adapter (6) from the socket. If this happens, you must stop
using the hair & beard trimmer until it has been checked
by a specialist. Do not inhale smoke possibly caused by a
burning device. If you have inhaled smoke, consult a
physician. Inhaling smoke can be harmful to your health.
Make sure there are no naked flames (for example,
burning candles) placed on or near the hair & beard
trimmer.
Operate the hair & beard trimmer in a dry environment
and never near highly flammable materials, such as
curtains or explosive and/or flammable gases or liquids.

SilverCrest SHBD 600 A1
English - 9
DANGER of injury
The hair & beard trimmer is only intended for trimming
human hair.
All cables should be laid in such a way that no one steps
on them or is obstructed by them.
Never use the hair & beard trimmer with a faulty or
broken comb attachment (12). A comb attachment (12)
with missing teeth may lead to injury. The same also
applies if the thinning attachment (11) has missing teeth.
RISK of damage to property
Always take hold of the cable by the plug and do not pull
on the cable itself.
Do not place any items of furniture or other heavy objects
on cables. Make sure that the cables are not bent,
particularly at the plug and at the connecting sockets.
Ensure that the power cable does not come into contact
with hot or sharp areas or edges.
Never make a knot in a cable and do not connect it with
other cables.
The hair & beard trimmer must not be exposed to direct
sources of heat
(for example, heaters), direct sunlight or strong artificial
light.
Avoid contact with aggressive liquids.

SilverCrest SHBD 600 A1
10 - English
The hair & beard trimmer must not be exposed to
excessive shocks or vibrations.
No foreign bodies should penetrate into the hair & beard
trimmer.
5. Copyright
All contents of these operating instructions are subject to copyright law and are provided to the
user solely as a source of information. Any form of copying or reproduction of data and
information without the express written permission of the author is prohibited. This also concerns
commercial use of the content and data. The text and illustrations correspond to the technical
standards at the time of printing. Subject to alterations.
6. Before initial use
Remove the hair & beard trimmer from the packaging and remove all packaging materials
completely. Check the hair & beard trimmer for signs of damage. If the hair & beard trimmer is
damaged, it must not be put into operation.
6.1. Charging the battery
Before initial start-up or if the built-in battery is flat, charge up the device as follows:
Firstly, connect the mains adapter port (5) of the hair & beard trimmer to the small plug on the
cable of the mains adapter (6) and then insert the mains adapter (6) into an easily accessible,
live power socket.
The display (4) will indicate the current charge level of the battery as a percentage during the
charging process. As soon as the number “100” is shown on the display (4), the battery is
fully charged.
Regardless of the charge level of the battery, the hair & beard trimmer can be used
at any time by via mains operation.

SilverCrest SHBD 600 A1
English - 11
6.2. Accessories
6.2.1. Scissors (7)
Use the scissors to manually remove hair in areas that are difficult to reach.
6.2.2. Comb (8)
Before using the hair & beard trimmers, use the comb
(8) to give your hair or beard a thorough comb through and remove any knots.
6.2.3. Blade oil (9)
After cleaning, add a few drops of blade oil (9) to the blade block (1) to keep the blade block
(1) moving freely.
6.2.4. Cleaning brush (10)
Use the cleaning brush (10) to remove any remaining hair from the blade block (1).
6.2.5. Thinning attachment (11)
The thinning attachment (11) supplied enables you to thin out your hair style without shortening
it all. The special design of the thinning attachment (11) ensures that only a section of the hair is
cut; the rest of your hair will remain its original length.
Fitting the thinning attachment (11) is similar to fitting a comb attachment (12). In order to fit the
thinning attachment (11), push it carefully onto the blade block (1) of the hair & beard trimmer
until both prongs of the thinning attachment (11) on the right and left lock into the recesses on
the hair & beard trimmer. To remove the thinning attachment (11), lever the prongs on the left
and right out of the recesses on the hair & beard trimmer and take off the thinning attachment
(11).
Please note: The thinning attachment (11) needs to be fitted so that the recesses of the thinning
attachment (11) are pointing in the direction in which the hair & beard trimmer moves.
6.2.6. Comb attachments (12)
With the comb attachments (12), you have the option of selecting a length setting of between 4
mm and 30 mm for the remaining length of the cut hair.
The cutting length adjustment switch (2) (0.8 mm, 1.5 mm, 2.2 mm, 2.8 mm) can also
be used to select in between stages if the cutting lengths specified on the comb attachments are
not exactly what you require.
Without a comb attachment (12), the hair is cut at a length of 0.8 mm and 2.8 mm. Use the
cutting length adjustment switch (2) (0.8 mm, 1.5 mm, 2.2 mm, 2.8 mm) to set the
cutting length you require.

SilverCrest SHBD 600 A1
12 - English
In order to fit one of the six comb attachments (12), push them carefully onto the blade block
(1) of the hair & beard trimmer until both prongs of the comb attachment (12) on the right and
left lock into the recesses on the hair & beard trimmer. To remove a comb attachment (12),
remove the prongs on the left and right from the recesses on the hair & beard trimmer and take
off the comb attachment (12).
Please note: The comb attachments (12) need to be fitted so that the teeth of the comb
attachments (12) are pointing in the direction in which the hair & beard trimmer moves.
7. Initial use
7.1. Cutting hair
The hair & beard trimmer can be used either in battery mode or with a connected mains
adapter (6).
DANGER! Take care when shaving areas of the body with thinner skin (for
example, armpits or pubic area). There is a risk of injury.
The hair being cut must be dry.
Firstly, familiarise yourself with the hair & beard trimmer and try to hold it so that the
on/off button (3) can be easily pressed. Please make sure that it rests securely in your
hand.
Give your hair a good comb through.
If necessary, use a comb attachment (12) to achieve the desired cutting length.
If you are not sure which comb attachment (12) you should use, start with the
largest (28----30 mm) first and then change to a smaller comb attachment (12) if you
need to.

SilverCrest SHBD 600 A1
English - 13
Switch on the hair & beard trimmer by pressing the on/off button (3).
Always switch on the hair & beard trimmer first before you start cutting. This will
prevent the blades from getting blocked.
Position the hair & beard trimmer such that the surface of the blade block (1) can move
parallel to the skin. Always run the hair & beard trimmer evenly through the hair as much
as possible. If the hair & beard trimmer is positioned differently, this can affect the set
cutting lengths.
To avoid injury or skin irritation when cutting folds of the skin or areas with thinner
skin, you should stretch the skin with your fingers as necessary.
Beginning cutting your hair at the neck or sides and move towards the middle of the
head. Then cut the front section of the hair, also towards the middle of the head.
Ideally, it is best to cut against the direction of hair growth.
To ensure you don’t miss any hair, move the hair & beard trimmer across the same hair
sections several times.
We also recommend that you occasionally comb your hair in between.
For cutting lengths over 12 mm, you may want to run the hair & beard trimmer through
the hair several times from different directions. This will give you an even cutting line.
When a comb attachment (12) is attached, the hair is shortened to the chosen length.
The comb attachments (12) need to be fitted so that the teeth of the comb attachments
(12) are pointing in the direction in which the hair & beard trimmer moves. You can also
use the cutting length adjustment switch (2) (0.8 mm, 1.5 mm, 2.2 mm, 2.8 mm)
to make a fine adjustment.
Without a comb attachment (12), the hair is cut at a length of 0.8 mm and 2.8 mm. Use
the cutting length adjustment switch (2) (0.8 mm, 1.5 mm, 2.2 mm, 2.8 mm) to set
the cutting length you require.
The following table provides an overview of the cutting lengths you can set using the cutting
length adjustment switch (2) combined with a comb attachment (12).
Comb attachment
(12)
Switch (2) position
0.8 mm 1.5 mm 2.2 mm 2.8 mm
4–6 mm 4 mm 4.7 mm 5.4 mm 6 mm
7–9 mm 7 mm 7.7 mm 8.4 mm 9 mm
10–12 mm 10 mm 10.7 mm 11.4 mm 12 mm
16–18 mm 16 mm 16.7 mm 17.4 mm 18 mm
22–24 mm 22 mm 22.7 mm 23.4 mm 24 mm
28–30 mm 28 mm 28.7 mm 29.4 mm 30 mm

SilverCrest SHBD 600 A1
14 - English
7.2. Contour cutting
Position the front edge of the blade block (1) at the required level of the hairline. Now move
the hair & beard trimmer evenly in a downwards motion.
7.3. Beard trimming
Comb your beard in the direction of hair growth using the comb (8) provided.
Trim your beard by starting from the ear and working your way downwards. Trim one
side first and then the other.
If you want to cut the beard very short or make contours, use the hair & beard trimmer
without a comb attachment (12).
Adjust the cutting length as required by using the cutting length adjustment switch (2).
To trim a moustache, comb the hair straight down using the comb (8) provided. Start
cutting in the middle above the mouth and work your way from there to one side first,
and then to the other.
8. Cleaning/maintenance
8.1. Cleaning
DANGER! Always remove the mains adapter (6) from the socket and the small
plug on the cable of the mains adapter from the mains adapter port (5) of the hair
& beard trimmer before cleaning commences. Switch off the hair & beard trimmer.
DANGER! Never immerse the hair & beard trimmer in water or any other liquid.
Remove the comb attachment (12), if fitted. The comb attachments (12) can be cleaned
using soapy water. Then dry them well.
The housing of the hair & beard trimmer can be wiped using a slightly damp cloth; never
use any aggressive cleaning agents.
Remove any remaining hair from the blade block (1) using the cleaning brush (10).
For a more intensive clean, you can remove the blade block (1) from the hair & beard
trimmer. Use your thumbs to apply pressure to the white ceramic blade until the blade
block (1) comes off the head of the hair & beard trimmer. Remove the blade block (1).

SilverCrest SHBD 600 A1
English - 15
Use the cleaning brush (10) to remove any remaining hair from the head of the hair &
beard trimmer and the removed blade block (1). The blade block (1) can then be rinsed
off under running water. Dry the parts thoroughly after cleaning. Do so carefully to
prevent damaging the blade block (1).
To ensure the blade block (1) continues to move freely, it must be oiled after cleaning.
Add a few drops of blade oil (9) to the blade block (1).
Now put the blade block (1) back into the head of the hair & beard trimmer:
1. Attach the blade block (1) to the head of the hair & beard trimmer from above so that
the guide nose of the blade block (1) is inserted into the groove on the head (arrow).
2. Push the blade block (1) into the head until you hear it click and it is firmly in place.

SilverCrest SHBD 600 A1
16 - English
8.2. Maintenance
The blade block (1) of the hair & beard trimmer is subject to constant wear resulting from use.
To keep wear to a minimum and keep the blades sharp, the blade block should be cleaned
and oiled after use every time.
8.3. Storing the device when not in use/travel lock
If the hair & beard trimmer is not going to be used for a long period of time, clean
as described in the “Cleaning” section.
To help maintain the battery performance, you should charge it at regular intervals.
Keep the hair & beard trimmer in a clean, cool, dry place. If necessary, activate
the travel lock.
To prevent it from switching on unintentionally, the hair & beard trimmer has a
travel lock function:
Press and hold the On/Off button (3) for approximately five seconds to
activate the travel lock function.
Press and hold the On/Off button (3) for approximately five seconds to
deactivate the travel lock function. The travel lock is also deactivated
by connecting the mains adapter (6).
9. Troubleshooting
9.1. The hair & beard trimmer doesn’t seem to be working
The built-in battery is empty. Charge the battery.
Ensure that the socket, into which the mains adapter (6) is plugged, is receiving power. If
necessary, try another socket that you know is working.
9.2. I’m not happy with the result of the cut
The blade block (1) is dirty and/or is not running smoothly. Clean and oil the blade block
(1) as described in the ‘Cleaning’ section.

SilverCrest SHBD 600 A1
English - 17
10. Environmental and waste disposal information
Devices marked with this symbol are subject to European Directive
2012/19/EU. Electrical and electronic devices may not be put in the
household waste, but must be disposed of via designated public disposal
centres. By properly disposing of the old device, you can avoid environmental
damage and health hazards. Further information regarding proper disposal of
the old device can be obtained from your local authority or the shop where
you purchased the device.
Make sure the packaging is disposed of in an environmentally friendly
manner. Cardboard packaging can be put out for waste-paper collection or
taken to public collection points for recycling. The plastic packaging used for
your device is collected by your local waste management company and
disposed of in an environmentally-friendly manner.
The integrated battery cannot be removed for disposal.
The lithium-ion battery used in this device does not belong in normal domestic
waste and must be disposed of in the appropriate way. Contact your local
collection point. Point out during disposal that the device contains a battery.
Discharge the built-in battery before disposal. Switch on the hair & beard
trimmer and leave it running until the battery is empty.
If it is not possible to discharge the battery due to a fault or damage, ask your
local disposal facility how to proceed further.
11. Marks of conformity
This device conforms to the fundamental requirements and other relevant
regulations of the EMC Directive 2014/30/EU, the ERP Directive
2009/125/EC, the RoHS Directive 2011/65/EU and the Low-Voltage
Directive 2014/35/EU.
You can download the full EU declaration of conformity at the following link:
www.targa.de/downloads/conformity/285968.pdf

SilverCrest SHBD 600 A1
18 - English
12. Notes on guarantee and service
Warranty of TARGA GmbH
Dear Customer,
This device is sold with three years warranty from the date of purchase. In the event of product
defects, you have legal rights towards the seller. These statutory rights are not restricted by our
warranty as described below.
Warranty conditions
The warranty period commences upon the date of purchase. Please keep the original receipt in
a safe place as it is required as proof of purchase. If any material or manufacturing faults occur
within three years of purchase of this product, we will repair or replace the product free of
charge as we deem appropriate.
Warranty period and legal warranty rights
The warranty period is not extended in the event of a warranty claim. This also applies to
replaced and repaired parts. Any damage or defects discovered upon purchase must be
reported immediately when the product has been unpacked. Any repairs required after the
warranty period will be subject to charge.
Scope of warranty
The device was carefully manufactured in compliance with stringent quality guidelines and
subjected to thorough testing before it left the works. The warranty applies to material and
manufacturing faults. This warranty does not cover product components which are subject to
normal wear and which can therefore be regarded as wearing parts, or damage to fragile
components such as switches, rechargeable batteries or components made of glass. This
warranty is void if the product is damaged, incorrectly used or serviced. To ensure correct use
of the product, always comply fully with all instructions contained in the user manual. The
warnings and recommendations in the user manual regarding correct and incorrect use and
handling of the product must always be observed and complied with. The product is solely
designed for private use and is not suitable for commercial applications. The warranty is
rendered void in the event of incorrect handling and misuse, if it is subjected to force, and also
if any person other than our authorised service technicians interfere with the device. No new
warranty period commences if the product is repaired or replaced.
Submitting warranty claims
To ensure speedy handling of your complaint, please note the following: