Silvercrest SKV 1200 A1 User manual

NOTICE
► Carefully read the safety instructions in the operating manual before using
the appliance for the first time!
Preparations
1) Take all the parts out of the box and remove the packaging material and any protective wrapping
or stickers.
2) Clean all components as described in the section "Cleaning and care".
3) Place the appliance on a clean and level surface.
4) Insert the power plug into the socket.
Working with kneading hook, beater and whisk
1) Press down the release lever and move the swivel arm to the highest position.
2) Insert the mixing bowl in such a way that the protrusions on the mixing bowl fit into the recesses
in the base . To do this, one of the handles must be pointing in the direction of the rotary switch .
Turn the mixing bowl clockwise so that it is locked and firmly held in place.
3) To use the lid , place it on the part of the housing which surrounds the attachment tool socket in
such a way that the filling opening is facing you.
4) Depending on what you want to do, attach the kneading hook , whisk -or beater 3in the retain-
er for inserting attachments :
5) Add the ingredients you wish to process into the mixing bowl .
6) Press down the release lever and push the swivel arm with the mounted insert downwards into
the working position.
7) Turn the rotary switch to the desired level.
Quick Start Guide
short_IB_281064_GB.indd 1 20.10.16 14:28
DIN A5 148 mm x 210 mm

Working with the blender
1) If necessary, press down the release lever and press the swivel arm downwards into the working
position.
2) Remove the drive protection lid 1.
3) Place the blender 0on the blender drive unit %in such a way that the protrusions on the underside of
the blender 0engage with the recesses of the blender drive unit %. The symbol on the blender 0
must be pointing to the symbol on the appliance. Turn the blender 0anticlockwise as far as it will go.
The symbol on the blender 0must then be pointing to the symbol on the appliance.
4) Add the ingredients.
5) Place the blender lid .with measuring cup !in position in such a way that the lips of the blender
lid .also seal the spout.
6) Turn the rotary switch to the desired level.
Ident. no.: SKV1200A1-072016-3
short_IB_281064_GB.indd 2 20.10.16 14:28
DIN A5 148 mm x 210 mm