Silvercrest 352828 2010 User manual

ELECTRIC MINCER SFW 350 D4
ELECTRIC MINCER
Operating instructions
ΚΡΕΑΤΟΜΗΧΑΝΗ
Οδηүίες χρήσης
ELEKTRISCHER FLEISCHWOLF
Bedienungsanleitung
IAN 352828_2010
CV_352828_SFW350D4_GB-IE-NI-CY.indd 1-3 30.11.2020 11:30:24

GB/IE/NI/CY Operating instructions Page 1
GR/CY Οδηүίες χρήσης Σελίδα 23
DE/AT/CH Bedienungsanleitung Seite 47
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
Πριν ξεκινήσετε την ανάγνωση, ανοίξτε τη σελίδα με τις εικόνες και εξοικειωθείτε με όλες τις λειτουργίες
της συσκευής.
Klappen Sie vor dem Lesen die Seite mit den Abbildungen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.
CV_352828_SFW350D4_GB-IE-NI-CY.indd 1-3 30.11.2020 11:30:24

A
B
r e q
5
w
z
t
u
1
2
3
C
o
a
s
p
i
4
08
7
9
6
CV_352828_SFW350D4_GB-IE-NI-CY.indd 4-6 30.11.2020 11:30:26

GB│IE│NI│CY │ 1 ■
SFW 350 D4
Index
Introduction...................................................2
Copyright .............................................................. 2
Limited liability ........................................................... 2
Intended use ..................................................2
Items supplied/ Component description............................3
Technical data .................................................4
Safety instructions .............................................4
Assembly /Disassembly.........................................6
Assembling the meat grinder ................................................ 6
Assembling the sausage stuffer attachment .................................... 7
Assembling the kubbe attachment............................................ 8
Assembling the biscuit attachments ........................................... 8
Fitting the strainer attachment ............................................... 9
Operation ...................................................10
Operating the appliance ..................................................11
Processing meat.........................................................11
Processing sausage meat.................................................. 12
Using the kubbe attachment ............................................... 12
Making biscuits .........................................................13
Straining tomatoes....................................................... 13
Non-functionality .............................................14
Cleaning.....................................................14
Cleaning the motor block .................................................15
Cleaning the accessories.................................................. 15
Storage .....................................................16
Disposal .....................................................17
Kompernass Handels GmbH warranty............................18
Service................................................................ 19
Importer ............................................................... 19
Recipes......................................................20
Kibbeh ................................................................20
Meat rolls..............................................................21
Fresh Grill Sausages .....................................................22
Biscuits ................................................................22
IB_352828_SFW350D4_LB6-.indb 1 01.12.2020 14:23:41

■ 2 │ GB│IE│NI│CY SFW 350 D4
Introduction
Congratulations on the purchase of your new appliance.
You have clearly decided in favour of a quality product. These operating instructions
are a part of this product. They contain important information in regard to safety,
use and disposal. Before using the product, familiarise yourself with all of these
operating and safety instructions. Use the product only as described and only for
the specified areas of application. Retain these instructions for future reference. In
addition, pass these documents on, together with the product, to any future owner.
Copyright
This documentation is copyright protected.
Any copying or reproduction of it, including as extracts, as well as the reproduction
of images, also in an altered state, is only permitted with the written authorisation
of the manufacturer.
Limited liability
All technical information, data and instructions for the installation, connection
and operation contained in these operating instructions correspond to the latest
available at the time of printing and, to the best of our knowledge, take into
account our previous experience and know-how.
No claims can be derived from the details, illustrations and descriptions in these
instructions.
The manufacturer assumes no responsibility for damage caused by failure to ob-
serve these instructions, improper use, incompetent repairs, making unauthorised
modifications or for using unapproved replacement parts.
Intended use
This appliance is intended only for the preparation of food in quantities expected
in domestic households:
▯ Mincing fresh meat,
▯ Making sausages with natural or artificial sausage skin,
▯ Making biscuits,
▯ Straining tomatoes.
This appliance is not intended for the processing of frozen foods or other hard
foodstuffs, e.g. bones or nuts, or for use in commercial or industrial environments.
IB_352828_SFW350D4_LB6-.indb 2 01.12.2020 14:23:41

GB│IE│NI│CY │ 3 ■
SFW 350 D4
Items supplied/ Component description
Figure A:
1Biscuit attachment with pattern strips
2Stodger
3Feeding tray
4Cable retainer
5Motor unit
6Meat grinder casing made of metal
7Locking clamp
8Tomato outlet
9Plastic screw
0Strainer sieve
qTransport screw
wSpring
eCross blade
rCutting discs for coarse and fine mincing
tRing clamp
zSausage stuffer attachment
uSausage disc
iKubbe attachment
Figure B:
oLocking button
Figure C:
p“I” button (On)
a“0” button (Off)
s“<” button (Reverse)
IB_352828_SFW350D4_LB6-.indb 3 01.12.2020 14:23:41

■ 4 │ GB│IE│NI│CY SFW 350 D4
Technical data
Voltage 220 - 240 V ∼ (AC), 50 Hz
Power consumption 250 - 350 W
Protection class II / (Double insulation)
All of the parts of this appliance
that come into contact with food
are food-safe.
C.O. Time 15 minutes
C.O. Time
The C.O. Time (Continuous Operation) details how long an appliance may be
used without the motor overheating and being damaged. After the appliance has
run for this period it must be switched off until the motor has cooled itself down.
Safety instructions
RISK OF ELECTRIC SHOCK
► Ensure that the power cable does not become damaged. Pro-
tect the cable from heat and ensure that it cannot be trapped
or clamped.
► Arrange for defective power plugs and/or cables to be
replaced as soon as possible by a qualified technician or by
our Customer Service Department to avoid the risk of injury.
► Use the appliance only in dry indoor areas, not outdoors.
Never immerse the motor block in water or any other
liquid! If you do, then you could receive a potentially
fatal electric shock.
WARNING!
► Never use the appliance for purposes other than those listed
here. There will be a major risk of serious accidents should
you try to neutralise the safety fitments on the appliance!
IB_352828_SFW350D4_LB6-.indb 4 01.12.2020 14:23:49

GB│IE│NI│CY │ 5 ■
SFW 350 D4
WARNING! RISK OF INJURY!
► Never put your hand into the openings of the appliance. Do
not insert any objects of any kind into the openings – except
for the appropriate stodger and the foodstuff to be processed.
If you do, there will be a serious risk of accidents!
► Unplug the appliance from the power source before attaching
or removing accessories.
► Do not leave the appliance unsupervised when it is ready
for use. To avoid it being switched on accidentally, always
unplug the appliance after use or during breaks.
► Only use the original accessory parts for this appliance.
Other accessories may not meet the safety requirements.
► Never operate the appliance in a no-load condition. This
could irreparably damage the appliance.
► Before changing accessories or additional parts that are in
motion during operation, the appliance must be switched off
and disconnected from mains power.
► Never use the appliance for purposes other than those
described in these instructions.
► Warning – the cross blade is very sharp! Always take care
when handling and cleaning the appliance.
► The appliance should always be disconnected from the mains
when unattended and before assembly, disassembly or cleaning.
► This appliance may not be used by children.
► The appliance and its connecting cable must be kept away
from children.
► This appliance may be used by persons with limited physical,
sensory or mental capabilities or lack of experience and
knowledge, provided that they are under supervision or
have been told how to use the appliance safely and are
aware of the potential risks.
► The appliance must not be used as a plaything by children.
IB_352828_SFW350D4_LB6-.indb 5 01.12.2020 14:23:49

■ 6 │ GB│IE│NI│CY SFW 350 D4
Assembly /Disassembly
CAUTION - PROPERTY DAMAGE!
► All accessories are coated with a thin film of oil to protect them from corrosion.
Therefore, carefully clean all of the parts before using the appliance for the
first time, as described in detail in the chapter "Cleaning". After subsequent
usage, always apply a light coating of cooking oil to the metallic components.
NOTICE
► Before using for the first time, remove the protective foil from the control panel.
Assembling the meat grinder
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Place the transport screw qin the meat grinder casing 6.
2) Place the spring wonto the transport screw q.
3) Then fit the cross blade eon so that the sharp side points away from the
spring w. Ensure that the square opening in the cross blade eis placed
correctly on the square axle.
WARNING! RISK OF INJURY!
► The cross blade eis very sharp! Risk of injury!
CAUTION - PROPERTY DAMAGE!
► The appliance will be damaged if the cross blade eis inserted the other
way around!
4) Select the appropriate cutting disc r.
IB_352828_SFW350D4_LB6-.indb 6 01.12.2020 14:23:50

GB│IE│NI│CY │ 7 ■
SFW 350 D4
5) Place your selected cutting disc rinto the meat grinder casing 6so that
the fixings on the cutting disc r are located in the openings in the meat
grinder casing 6.
6) After everything has been correctly assembled, screw the ring clamp t
back on hand-tight.
7) The ready-assembled meat grinder ca sing 6is connected by a bayonet
connector to the motor unit 5:
– Insert the meat grinder casing 6into the motor unit 5such that the
arrow on the meat grinder casing 6 lies against the symbol on the
motor unit 5. The locking button o presses itself in (Fig. B).
– Lightly press the meat grinder casing 6in and at the same time turn
the feeding shaft on the meat grinder casing 6into the middle position
(Fig. B) so that the arrow on the feeding shaft points to the symbol .
When the meat grinder casing 6engages, the locking button o
springs out.
– Finally, place the feeding tray 3on top of the feeding funnel.
– To dismantle it, press the locking button o and turn the feeding funnel
to the right (Fig. B) . You can now pull the meat grinder casing 6out.
Assembling the sausage stuffer attachment
Unfold the fold-out side - there you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing 6as described under “Assembling the
meat grinder”.
2) Dismantle all parts which are fitted to/in the meat grinder casing 6and
clean them.
3) Coat all metal parts with cooking oil.
4) Put the transport screw q, the spring wand the cross blade eback into
the meat grinder casing 6.
5) Insert the sausage disc uso that the fixings on the sausage disc uare
located in the openings in the meat grinder casing 6.
6) Then place the sausage stuffer attachment zbefore the sausage disc u.
7) Screw the ring clamp ton hand-tight.
8) Assemble the meat grinder casing 6as described under “Assembling the
meat grinder”.
IB_352828_SFW350D4_LB6-.indb 7 01.12.2020 14:23:55

■ 8 │ GB│IE│NI│CY SFW 350 D4
Assembling the kubbe attachment
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing 6as described under “Assembling the
meat grinder”.
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing 6.
NOTICE
► To use the kubbe attachment i, neither the cross blade e with the spring w,
nor a cutting or sausage disc r/u are required! Remove these from the
meat grinder casing 6if necessary.
3) Coat all metal parts with cooking oil.
4) Insert the two plastic parts of the kubbe attachment iso that the fixings on
the bottom kubbe attachment iring are located in the openings in the meat
grinder casing 6.
5) When everything has been attached correctly, screw the ring clamp tback
on hand-tight.
6) Assemble the meat grinder casing 6as described under “Assembling the
meat grinder”.
Assembling the biscuit attachments
Unfold the fold-out side. There you will find the step-by-step illustrations for as-
sembling the appliance.
1) Remove the meat grinder casing 6as described under “Assembling the
meat grinder”.
2) Disassemble any attachments that might be fitted and clean the meat grinder
casing 6.
NOTICE
► To use the biscuit attachment 1, neither the cross blade e with the spring w,
nor a cutting or sausage disc r/uare required! Remove these from the
meat grinder casing 6if necessary.
3) Coat all metal parts with cooking oil.
4) Pull the pattern strips 1away from the front of the biscuit attachment 1.
5) First place the plastic disc and then the metal disc of the biscuit attachment 1
into the meat grinder casing 6(see fold-out side). Insert the biscuit attach-
ment 1. so that the fixings on the biscuit attachment 1. are located in the
openings in the meat grinder casing 6.
6) After everything has been correctly assembled, screw the ring clamp t
back on hand-tight.
IB_352828_SFW350D4_LB6-.indb 8 01.12.2020 14:23:55

GB│IE│NI│CY │ 9 ■
SFW 350 D4
7) Replace the pattern strips 1back in to the front of the biscuit attachment 1.
Ensure that the grip on the pattern strips 1points away from the appliance.
If it does not, you will not be able to adjust the pattern, which is located
directly on the grip.
8) Assemble the meat grinder casing 6as described under “Assembling the
meat grinder”.
9) To dismantle it, you must first remove the pattern strips 1before you can
screw the ring clamp topen and take the biscuit attachment 1back out.
Fitting the strainer attachment
Unfold the fold-out page – it contains the step-by-step illustrations for assembling
the appliance.
1) Remove the meat grinder casing 6as described in “Assembling the meat
grinder”.
2) Remove any attachments that might be fitted and clean the meat grinder
casing 6.
NOTE
► The transport screw qand the cross blade ewith the spring ware not
required for the strainer attachment! Remove these from the meat grinder
casing 6if necessary.
3) Push the plastic screw 9into the meat grinder casing 6.
4) Push the strainer sieve 0over the plastic screw 9so that the tabs on the
strainer sieve 0fit into the recesses in the meat grinder casing 6. The holes
of the strainer sieve 0should be facing downwards.
5) Once everything has been correctly attached, roll the ring clamp tover the
strainer sieve 0and screw it on hand-tight.
6) Fit the meat grinder casing 6as described in “Assembling the meat grinder”.
7) Undo the locking clamp 7on the tomato outlet 8.
8) Place the tomato outlet 8under the strainer sieve by pushing the tip of the
strainer sieve 0through the small hole in the tomato outlet 8:
IB_352828_SFW350D4_LB6-.indb 9 01.12.2020 14:23:55

■ 10 │ GB│IE│NI│CY SFW 350 D4
9) Fasten the locking clamp 7so that it grips the meat grinder casing 6.
10) Close the locking clamp 7by flipping the small closure over the locking
clamp 7.
Operation
RISK OF ELECTRIC SHOCK
► NEVER open the housing of the motor unit 5– it does not contain any
user-serviceable elements. If the housing is opened, the warranty becomes
void. If the housing is opened, there is a risk of receiving a potentially fatal
electric shock.
CAUTION - PROPERTY DAMAGE!
► Do not use the appliance for longer than 15 minutes continuously. To avoid
an overheating of the appliance, after such a period switch it off and allow
it to cool down for ca. 30 minutes.
► NEVER activate the buttons "I" por "<" s, during a change of rotation
direction, if the appliance motor has not come to a complete stop. This
could damage the motor.
IB_352828_SFW350D4_LB6-.indb 10 01.12.2020 14:23:55

GB│IE│NI│CY │ 11 ■
SFW 350 D4
Operating the appliance
Once the appropriate attachments have been fixed:
1) Place the appliance where it will at all times be absolutely stable and under
no circumstances could it fall off of the work surface or in any way come into
contact with water (due to vibrations or becoming snagged in the power
cable). Vibration is unavoidable when it is working.
RISK OF ELECTRIC SHOCK
► Never touch an appliance, which is plugged in or is operational when it
happens, that falls or lands in water – or in the case of other emergencies!
First disconnect the appliance from the mains power source in all emergency
situations! Otherwise you run the risk of serious injury or loss of life!
2) Put the food which is to be processed in the feeding tray 3and place a
catchment container at the front under the exit opening.
3) First press the button “0” a to check that the appliance is still switched off.
Otherwise there is a risk that the appliance could unintentionally start
when the plug is inserted into the power socket.
4) Then insert the plug into a mains power socket.
5) Press the button “I” pto start the appliance.
WARNING! RISK OF INJURY!
► Push the foodstuff into the feeding shaft ONLY with the round stodger 2–
NEVER with one’s fingers, forks, spoons or similar objects. That could lead
to physical injury and also damage the appliance.
CAUTION - PROPERTY DAMAGE!
► Do not ever press so hard that the motor gets audibly slower. This could
overburden the machine and damage it.
Processing meat
1) Use pieces of meat that fit easily into the feeding funnel. If necessary, cut the
meat to size beforehand. Check that the meat does not have any bones and
or tendons.
WARNING!
► Minced meat is very prone to bacterial contamination. Therefore take care
to maintain good hygiene when processing meat. If you do not, it may
cause serious health problems.
2) When you have read and understood all of the instructions on the topic
”Meat“, you can now use the appliance as described in the chapter
“Operating the appliance”.
IB_352828_SFW350D4_LB6-.indb 11 01.12.2020 14:23:55

■ 12 │ GB│IE│NI│CY SFW 350 D4
Processing sausage meat
1) Pass meat through the meat grinder twice before using it as sausage stuffing.
2) To make sausage stuffing, add some chopped onions, spices and other
ingredients to the minced meat, as per your recipe, and knead the mixture
well. Refrigerate this for 30 minutes before processing it further.
3) Pull one end of the sausage skin (natural or artificial sausage skin) onto the
sausage stuffer attachment zand tie a knot in the other end. For 1 kg of the
filling, you will need approximately 1.60 m of sausage skin.
TIP!
Soak the natural sausage skin in lukewarm water for about 3 hours before
using it and wring it out before attaching it. This will make the natural sau-
sage skin more elastic. Natural sausage skins are available from butcher
suppliers close to slaughter houses or from your family butcher.
4) The sausage mixture will be pressed into the sausage skin by the sausage
stuffer attachment z. When it is long enough switch the appliance off, press
the sausage together at the ends and rotate it a couple of times along its
longitudinal axis.
TIP!
Sausage meat tends to expand when cooked or frozen. Therefore, to
prevent it from bursting it is best not to overstuff the sausage.
5) When you have read and understood all of the instructions on the topic
”Sausage”, you can now use the appliance as described in the chapter
“Operating the appliance”.
Using the kubbe attachment
With the kubbe attachment ifoodstuffs can be processed to form hollow rolls
of meat or vegetables, which can then be stuffed as desired.
1) First put the meat through the meat grinder twice before pressing it through
the kubbe attachment i.
2) When you have read and understood all of the instructions on the topic
“Kubbe-Attachment”, you can now use the appliance as described in the
chapter “Operating the appliance”.
IB_352828_SFW350D4_LB6-.indb 12 01.12.2020 14:23:55

GB│IE│NI│CY │ 13 ■
SFW 350 D4
Making biscuits
After you have made the biscuit pastry according to your recipe, and after having
fixed the biscuit attachment 1:
1) Line a small baking tray with greaseproof paper and place or hold it directly
under the exit opening at the front of the appliance.
2) Press pastry evenly into the meat grinder casing 6– the transport screw q
then pushes it through the selected design on the design motif strip of the
biscuit attachment 1.
3) When the biscuit is the required length, stop the appliance and break the
pastry off at the exit opening. Lay the biscuits on the baking tray.
4) When you have read and understood all of the instructions on the topic
“Biscuits”, you can now use the appliance as described in the chapter
“Operating the appliance”.
Straining tomatoes
1) Place a container under the tomato outlet 8.
2) Place a container at the front under the strainer sieve 0.
3) Quarter the tomatoes and push them into the meat grinder casing 6slowly
and evenly.
The plastic screw 9pushes the tomatoes through the strainer attachment.
The strained tomatoes fall into the tomato outlet 8.
The tomato skin is ejected from the strainer sieve 0at the front of the appli-
ance.
NOTE
If tomato juice starts leaking from the screw joints of the strainer attach-
ment, this can have the following causes:
–You are working too fast.
–You are using too much pressure to press the tomato pieces into
the appliance.
–The tomato pieces are too large.
► Try working more slowly, press the tomato pieces gently into the appliance
and cut the tomatoes into smaller pieces.
4) Once you have read and understood all of the instructions in the section
“Straining tomatoes”, you can use the appliance as described in the section
“Operating the appliance”.
IB_352828_SFW350D4_LB6-.indb 13 01.12.2020 14:23:55

■ 14 │ GB│IE│NI│CY SFW 350 D4
Non-functionality
If the drive is blocked by accumulated food:
■ Press the button “0” a to stop the meat grinder.
■ Press and hold the button “<” s. The appliance will now run in the reverse
direction. This enables you to transport the food which has become stuck a
short way backwards, and the motor to run freely again.
■ When the drive runs smoothly again, release the “<” s button.
■ Press the button “I” p to re-start the meat grinder.
■ If you do not succeed in getting the drive free with this, clean the appliance
as described in the chapter “Cleaning”.
Should the motor suddenly stop, it could be due to automatic
activation of the internal overload fuse. This is intended to
protect the motor.
■ Switch the appliance off and allow it cool down for approximately 30 minutes
before continuing to use it.
■ Should this not work, wait for a further 15 minutes.
■ If it still does not function at the end of this period, this indicates a technical
problem. In this case, contact the Customer Service Centre.
If the power cable is damaged or the accessories are
visibly damaged:
■ Immediately switch the appliance off by pressing the “0” abutton!
■ If this is not possible without risk to personal safety, disconnect the plug from
the mains power socket.
■ Arrange for the defective parts to be repaired by Customer Services before
re-using the appliance.
Cleaning
RISK OF ELECTRIC SHOCK
► Disconnect the plug from the mains power socket before cleaning the appli-
ance. In this way accidents caused by the inadvertent switching on of the
appliance and electric shocks can be avoided.
IB_352828_SFW350D4_LB6-.indb 14 01.12.2020 14:23:56

GB│IE│NI│CY │ 15 ■
SFW 350 D4
Cleaning the motor block
■ Clean the exterior surfaces and the power cable with a slightly damp cloth.
For stubborn dirt, add mild detergent to the cloth. Afterwards, wipe with a
cloth moistened only with fresh water to ensure that all detergent is removed.
Dry the appliance well before re-using it.
RISK OF ELECTRIC SHOCK
► Never immerse the motor block 5in water or any other liquid! Should
this occur, you are at risk of a potentially fatal electric shock if permeating
moisture makes contact with the electrical wiring.
CAUTION - PROPERTY DAMAGE!
► Never use detergents, abrasive cleaners or solvents. These could damage
the appliance and leave residues on the foodstuffs.
Cleaning the accessories
■ Clean the accessories that could come in contact with foodstuffs, ...
– with hot water and a household detergent suitable for use with foods.
NOTICE
► We recommend using a bottle brush to clean the strainer sieve 0.
This makes it easier to clean the small holes.
NOTICE
► The plastic part of the biscuit attachment 1, the stodger 2, the
sausage stuffer attachment zand the kubbe attachment iare
dishwasher safe.
► Place the plastic parts in the upper basket of the dishwasher if possible and
make sure that none of the parts can get stuck. Otherwise, the plastic parts
could become deformed!
WARNING! RISK OF INJURY!
► The cross blade eis very sharp! Risk of injury!
■ Dry all parts thoroughly, before re-using the appliance.
NOTICE
► Apply a light coating of cooking oil to all metallic components after each
cleaning Otherwise, metal parts can discolour!
IB_352828_SFW350D4_LB6-.indb 15 01.12.2020 14:23:56

■ 16 │ GB│IE│NI│CY SFW 350 D4
Storage
■ Wind the mains cable clockwise around the cable retainer 4 on the underside
of the appliance and fasten it in place as shown below. This keeps it safe
from damage:
■ Store the appliance at a dry location.
■ After drying the metal attachments coat them lightly with a little cooking oil –
if you are not going to use the appliance immediately. This will protect them
from corrosion.
■ Store the appliance where it will be out of reach of children and people
requiring supervision. They are not always able to correctly assess the
potential risks involved with using electrical appliances.
IB_352828_SFW350D4_LB6-.indb 16 01.12.2020 14:23:56

GB│IE│NI│CY │ 17 ■
SFW 350 D4
Disposal
Do not dispose of the appliance in your normal domestic waste.
This product is subject to the provisions of European Directive
2012/19/EU (Waste Electrical and Electronic Equipment).
Dispose of the appliance through an approved disposal centre or at your com-
munity waste facility. Observe the currently applicable regulations. In case of
doubt, please contact your waste disposal centre.
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product.
The packaging protects the appliance from damage during carriage.
The packaging materials have been selected for their environmental friendliness
and ease of disposal, and are therefore recyclable.
Returning the packaging to the materials cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
NOTICE
► If possible, keep the original packaging of the appliance during the warranty
period so that the device can be packed properly for returning in the event
of a warranty claim.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: Plastics
20–22: Paper and cardboard
80–98: Composites
IB_352828_SFW350D4_LB6-.indb 17 01.12.2020 14:24:02