Silvercrest SSR 10 A1 User manual

SilverCrest SSR 10 A1
English - 1
Content
Introduction.............................................................2
Intended use............................................................2
Supplied items.........................................................3
Controls and button functions ..................................4
Visual display..........................................................5
Technical data..........................................................6
Safety instructions ...................................................7
Prior to use............................................................12
Inserting the batteries................................................................ 12
Connecting the earphones....................................................... 12
First use .................................................................13
Setting the time.......................................................................... 13
Switching on / off ..................................................................... 13
Setting the volume..................................................................... 14
Automatic station scan with auto store function ..................... 14
Manual station scan ................................................................. 15
Manual station tuning............................................................... 15
Manually saving stations.......................................................... 16
Selecting preset stations ........................................................... 16
SLEEP timer ................................................................................ 17
Setting the alarm time (Alarm 1 / Alarm 2) ........................... 18
Activating / deactivating the alarm function .......................... 18
SNOOZE function .................................................................... 19
Troubleshooting ....................................................19
Environmental and disposal information ...............20
Conformity information .........................................21
Warranty information ...........................................21

SilverCrest SSR 10 A1
2- English
Introduction
Thank you for purchasing a SilverCrest product.
The SilverCrest scan radio SSR 10 A1, hereinafter referred to as
scan radio, has a digital tuner and provides radio reception in
stereo quality in an easy manner. The next available station is
automatically played at the touch of a button. Important
information such as frequency or time is displayed on the easy-to-
read display. You have the option of saving 10 stations.
Intended use
This is a consumer electronics device which is used to receive
radio stations and as an alarm. It is only designed for private use
and not for industrial or commercial purposes. Furthermore, the
device may not be used in tropical climates. Only connection
cables and external devices that are designed for this product in
terms of safety, electromagnetic compatibility and shielding
quality may be used in conjunction with the device. This device
meets all relevant norms and standards in conjunction with CE
conformity. In the event of any modification to the device that
was not approved by the manufacturer, compliance with these
standards is no longer guaranteed. The manufacturer does not
accept any liability for any resulting damage or faults in such
cases. Only use accessories specified by the manufacturer.
Please observe the regulations and laws in the country of use.

SilverCrest SSR 10 A1
English - 3
Supplied items
A Scan radio SSR 10 A1 with strap
B Earphone type: SSR 10 A1
C 2 batteries of type AAA, LR3, 1.5V
D These operating instructions (symbolic representation)

SilverCrest SSR 10 A1
4- English
Controls and button functions
1 Display
2 "-" button
3 "MODE" button
4 "+" button
5 Strap
6 "On/Standby" button
7 "PRESET" button
8 Earphone jack (at the side)
9 Battery compartment cover
10 Opening for buzzer

SilverCrest SSR 10 A1
English - 5
Visual display
11 Radio mode
12 Alarm 1
13 Alarm 2
14 SCAN
15 SNOOZE function
16 Frequency, time or alarm time
17 Low battery power
18 Unit of frequency for radio mode
19 SLEEP timer
20 VOLUME
21 PRESET
22 AM / PM (only for 12-hour display)

SilverCrest SSR 10 A1
6- English
Technical data
Operating environment 5°C to 35°C, max. 85%
rel. humidity
Permissible storage
conditions
-10°C to 50°C,
Note: The device must not
be stored in hot places, for
example, in a car in summer.
Operating voltage 3V
Battery type AAA (LR3) 1.5V
Power consumption 45 mW
Operating time approx. 65 hours at 75%
volume
Frequency range of radio 87.5 to 108MHz
Dimensions (W x H x D) approx. 80 x 28 x 19.5mm
Weight 25g (without batteries)
Earphones SSR 10 A1
Maximum output voltage at
the headphone jack approx. 27 mV
Maximum sound pressure
with supplied earphones (B) approx. 85dB(A)
Broadband characteristic
voltage of the supplied
earphones (B) approx. 80 mV
The technical data and design may be changed without
notification.

SilverCrest SSR 10 A1
English - 7
The specifications for the frequency range describe only the
technical features of the device.
Note that different legal regulations may apply in different
countries to the free-to-air frequency range. Information received
outside of the permitted frequency ranges must not be exploited
nor its content or the fact of its reception forwarded to third
parties.
Safety instructions
Before using this device for the first time, please read the
following instructions carefully and take note of the safety
warnings, even if you are familiar with the use of electronic
devices. Please keep these instructions safe for future reference. If
you sell the device or pass it on, always include these
instructions. They are an integral part of the product.
DANGER! This symbol indicates an imminent
dangerous situation which, if not prevented, could
result in serious injury or even death.
WARNING! This symbol indicates important
information for safe operation of the device and the
safety of the user.
This symbol indicates other important information on
the topic.

SilverCrest SSR 10 A1
8- English
Batteries
Always ensure correct polarity of the batteries. Please note the
markings on the batteries and in the battery compartment. Never
try to recharge batteries and never throw them into an open fire.
Never use different batteries (old and new, alkaline and carbon,
etc.) at the same time. Remove the batteries if you will not be
using the device for an extended period of time. In the event of
improper use, there is a risk of explosion and leakage. Batteries
are not toys. Consult a doctor immediately if someone swallows
batteries. Batteries must not be dented or opened as leaking
chemicals can cause injuries. In the event of skin or eye contact
with chemicals, they must be immediately rinsed with generous
amounts of water and a doctor must be consulted.
Ensure that
no direct heat sources (e.g. heating) can affect the device;
no direct sunlight or bright artificial light reaches the device;
any contact with splashed and dripping water and corrosive
liquids is avoided and the device is not operated in the vicinity
of water. In particular, the device should never be submerged
in liquid (do not place any items filled with liquid, e.g. vases or
drinks, on or near the device);
the device is not in the immediate vicinity of magnetic fields
(e.g. loudspeakers);

SilverCrest SSR 10 A1
English - 9
no fires sources (e.g. burning candles) are placed on or near
the device;
no foreign objects penetrate the device;
the device is never subjected to extreme temperature
fluctuations as this could result in condensation and electrical
short circuits. If the device was subjected to extreme
temperature fluctuations, however, wait (approx. 2 hours) until
the device has reached ambient temperature before use;
the device is never subjected to excessive shocks and
vibrations.
Children and persons with
disabilities
Electrical devices do not belong in the hands of children.
Children may not recognise potential risks. Persons with limited
physical, mental or sensory abilities should also only use
electrical devices appropriately. Never allow children to use
electrical devices unsupervised unless they have been instructed
accordingly or are supervised by a person responsible for their
safety. Children should always be supervised to ensure that they
do not play with this device. Small parts can be fatal if
swallowed. Always keep plastic packaging out of
reach also.
It poses a suffocation risk!

SilverCrest SSR 10 A1
10 - English
Operating environment
The device is not designed for use in environments with a high
temperature or humidity (e.g. bathrooms) or in extremely dusty
conditions. Operating temperatures and operating air humidity:
5°C to 35°C, max. 85% rel. humidity.
Health risks due to excessive volume
levels
Take care when using earphones. Listening at high
volume for prolonged periods of time can impair
your hearing.
Only use the earphones (B) that are supplied with
the device, type: SSR 10 A1. Other earphones can
create harmful sound pressure.
Do not use the earphones (B) at high volumes. This impairs your
hearing and may disrupt your environment. Even if the device is
designed to ensure that ambient noise can still be heard, adjust
the volume so that you can continue to hear the ambient noise.
In dangerous situations, for example, driving in traffic, working
with machinery or other situations that require your full attention,
the sound can distract you or cause you to fail to perceive what
is happening around you. Thus do not use the device in such
situations.

SilverCrest SSR 10 A1
English - 11
Cleaning / maintenance
It is necessary to service the device if it has been damaged in
any way, for example, if the housing is damaged, if liquid or
objects have penetrated the device or if the product has been
exposed to rain or moisture. Servicing is also required if the
device is not working properly or has been dropped. If smoke is
produced, or there are any unusual sounds or smells, turn the
device off immediately and remove the batteries. In these cases,
the device should not be used until it has been inspected by
authorised service personnel. Only have qualified personnel
carry out the maintenance work on the device. Never open the
housing of the device. Only use a clean, dry cloth for cleaning
and never use any corrosive liquids. Never try to open the
housing of the device as this would void your warranty.
Copyright
All information contained in these instructions is subject to
copyright and is provided for information purposes only.
It is only permitted to copy or duplicate data and information
with the express and written consent of the author. This also
includes commercial use of the content and data.
The text and illustrations are based on the state of the art at the
time of printing.

SilverCrest SSR 10 A1
12 - English
Prior to use
Inserting the batteries
First, insert the supplied batteries (C). To do this, open the battery
compartment at the back of the device by sliding the battery
compartment cover (9) to the side in the direction of the
imprinted arrow and removing it. Insert the batteries (C) with the
correct polarity (pay attention to the +and -marks). The polarity
is illustrated on the batteries and in the battery compartment.
Then slide the battery compartment cover (9) back on the device
housing until it snaps into place.
If the volume decreases or if the device is not working, replace
the batteries (C) with new batteries of the same type. The device
indicates via "Low battery power" (17) on the display (1) when
the battery capacity is exhausted.
Connecting the earphones
Insert the jack plug of the supplied earphones (B) as far as
possible into the earphone jack (8) on the side of the device.

SilverCrest SSR 10 A1
English - 13
First use
Setting the time
If a timer has already been programmed and is active,
the time cannot be set.
If no button is pressed for approx. 5 seconds, the scan
radio exits the setting mode. All previously made
settings are saved.
Press the "MODE" button (3) when the device is switched off. The
display (1) indicates the current hour format: "12HR" or "24HR".
Set your desired hour format by pressing the "-" button (2) or "+"
button (4). Press the "MODE" button (3) again. The hour display
flashes and you can then set it by pressing the "-" button (2) or
"+" button (4). Then press the "MODE" button (3) again. The
minute display then flashes and you can set it by pressing the "-"
button (2) or "+" button (4).
Finally, press the "MODE" button (3) again. The set time is now
indicated on the display (1).
If you have selected the 12-hour format, the hours before noon
(AM) or hours after noon (PM) are indicated on the display (1).
Switching on / off
Briefly press the "On/Standby" button (6) to switch on the scan
radio. "ON" is indicated briefly on the display (1), followed by
the frequency currently set.

SilverCrest SSR 10 A1
14 - English
Briefly press the "On/Standby" button (6) again to switch off the
scan radio. "OFF" is indicated briefly on the display (1), followed
by the time currently set.
Setting the volume
You can set the device volume to a value between "00" (mute)
and "15" (maximum volume). The setting upon delivery is "10".
Proceed as follows:
Briefly press the "MODE" button (3) in radio mode. The display
indicates the volume level currently set. You can reduce or
increase the volume by pressing the "-" button (2) or "+" button
(4). If no button is pressed for approx. 3 seconds, the scan radio
exits the setting mode. The current setting is saved.
The setting has no effect on the volume of the buzzer for
the alarm clock function. The buzzer volume is always
the same.
Automatic station scan with auto store function
To receive radio stations, it is necessary for the supplied
earphones (B) to be connected to the earphone jack.
The earphone cable serves as a receiving aerial.
The most convenient way to search for stations and save them is
the automatic station scan with automatic saving of stations (auto
store function).
Switch on the scan radio with the "On/Standby" button (6).

SilverCrest SSR 10 A1
English - 15
Press the "MODE" button (3) for approx. 2 seconds to start the
automatic station scan. The automatic station scan always
starts at the lowest frequency (87.5MHz).
The scan radio now searches the entire frequency range for
stations with strong signals. On the display (1), "SCAN" (14)
flashes.
The first 10 stations found are stored directly in the presets 01
to 10 and saved.
Please note that already occupied presets are
overwritten.
Manual station scan
Switch on the scan radio with the "On/Standby" button (6).
Press the "-" button (2) or "+" button (4) for approx. 2 seconds
to start the manual station scan downwards or upwards. As
soon as the device finds a station with a strong signal, the scan
stops and the station is played.
If you want to switch to another station, press the "-" button (2)
or "+" button (4) again to restart the manual station scan
downwards or upwards. The device searches for the next
station with a strong signal.
Manual station tuning
As an alternative to the automatic or manual station scan, you
can also tune in stations manually. This enables you to find
stations with weaker signals also. Proceed as follows:
Switch on the scan radio with the "On/Standby" button (6).

SilverCrest SSR 10 A1
16 - English
Briefly press the "-" button (2) or "+" button (4).
You thus move 0.1MHz downwards or upwards in the
frequency band each time you press the "-" button (2) or "+"
button (4) respectively.
Proceed in this manner until you find the desired station.
Manually saving stations
You have the option of saving 10 stations or frequencies.
Proceed as follows:
Search for a station which you want to save.
Press the "PRESET" button (7) for approx.1 second until
"PRESET" (21) flashes on the display (1).
Use the "-" button (2) or "+" button (4) to select a preset
between 01 and 10.
Briefly press the "PRESET" button (7). As soon as the display
(1) returns to the frequency indicator the station has been
saved in the selected preset.
Please note that already occupied presets are
overwritten.
Selecting preset stations
To select a previously saved station, briefly press the "PRESET"
button (7) and use the "-" button (2) or "+" button (4) to select
a preset between 01 and 10.

SilverCrest SSR 10 A1
English - 17
Briefly press the "PRESET" button (7) again to confirm the
selection. The desired station is then played.
Preset stations are lost when batteries are changed.
SLEEP timer
With the SLEEP timer, you can set a time between 10 and 90
minutes after which your scan radio automatically switches off.
The setting is made in intervals of 10 minutes. Proceed as follows:
Switch off the scan radio with the "On/Standby" button (6).
Press the "On/Standby" button (6) until the display (1)
indicates the number 90 (for 90 minutes).
Then press the "On/Standby" button (6) repeatedly until you
reach the desired number of minutes (for example, 40). Each
time you press the "On/Standby" button (6), the number of
minutes to switching off is reduced by 10 minutes.
The scan radio then switches itself on and, after the previously
selected minutes (for example, 40), it switches itself off
automatically.
The display (1) indicates "SLEEP" (19) when the SLEEP timer is
activated.
You can start the station scan or access saved stations even
when the SLEEP timer is activated.
You can delete the activated SLEEP timer by switching off the
scan radio.

SilverCrest SSR 10 A1
18 - English
Setting the alarm time (Alarm 1 / Alarm 2)
You can set 2 alarm times. Make sure that the time is set
correctly. You can set the alarm time only when the device is
switched off. Switch off the device with the "On/Standby" button
(6) if it is switched on.
Briefly press the "PRESET" button (7). The display (1) indicates
"Alarm 1" (12), and when you briefly press the "PRESET"
button (7) again, the display (1) indicates "Alarm 2" (13).
Select Alarm 1 or Alarm 2 and briefly press the "MODE"
button (3).
The hour display flashes and you can then set it by pressing
the "-" button (2) or "+" button (4). Then press the "MODE"
button (3) again. The minute display then flashes and you can
set it by pressing the "-" button (2) or "+" button (4).
Finally, press the "MODE" button (3) again. The display (1)
then indicates the current time and the alarm you just set is
active. This is indicated by the respective alarm symbol
(12,13) on the display (1).
Proceed in the same manner to set the second alarm.
Activating / deactivating the alarm function
When you have set the desired alarm time, you can activate the
alarm function as follows:
Briefly press the "PRESET" button (7) repeatedly when the
device is switched off until the desired alarm symbol (12,13) is
indicated with the corresponding alarm time on the display (1).