10 GB/IE
Getting started
Note for zero or tare setting:
a) If the total weight of all the
substances already placed on
the kitchen scale including the
weighing bowl is less than
200g, then the LC display
4shows the “0” icon 24 in
the bottom left corner. This
means that the kitchen scale
has been reset to zero = the
remaining weight capacity of
the kitchen scale remains
between 5000 and 5200g.
b) If the total weight of all the
substances already placed
on the kitchen scale including
the weighing bowl is more
than 200g, then the LC dis-
play 4will show the “T”
icon 26 instead in the top
left corner. This means that the kitchen scale is
in tare mode = the remaining weight capacity
of the kitchen scale is 5000g minus the weight
of substances already placed on the kitchen
scale.
Q
Removing part of the weight
from the kitchen scale
j Place the weighing bowl 1on the weighing
platform 6.
Note: The container bowl must not exceed
200g.
j Press the On/Off/Zero button 5to switch
on the kitchen scale 2.
j Wait until the LC display 4stops and stabilizes
on 0g 17, 0:0.0lb:oz 20 or 0ml 18 or
0.0fl’oz 19, which will be the mode the kitchen
scale was in when it was last switched off.
j Press the mode button 3to set the weighing
mode 23 (preset to g or lb:oz).
j Place the substance to be weighed into the
weighing bowl 1to start the weighing process.
The LC display 4shows the weight of the first
substance placed in the weighing bowl.
j Press the On/Off/Zero button 5to reset the
LC display 4to zero.
j Now remove the desired amount of substance
from weighing bowl 1. The LC display 4
shows the weight of the substance removed
from the weighing bowl as a negative value.
Q
Automatic or manual switch-off
j The kitchen scale switches itself off automatically
if it has not been used for 2minutes.
j Press the On/Off/Zero button 5for longer
than 3seconds to switch off the kitchen scale.
Q
Volume units display mode
j Place the kitchen scale on
a solid, flat surface.
j Press the On/Off/Zero
button 5to switch on the
kitchen scale 2.
j Wait until the LC display
4stops and stabilizes on
0g 17, 0:0.0lb:oz 20 or
0ml 18 or 0.0fl’oz 19,
which will be the mode the
kitchen scale was in when
it was last switched off.
j Press the mode button 3
until milk 22 or water 21
appears as the volume
mode with the units as ml
or fl’oz.
j Place a container for liquid
or the weighing bowl 1
on the weighing platform 6.
j Press the On/Off/Zero button 5to set the
LC display 4to zero (0ml or 0.0fl’oz). Pour
milk or water (as selected previously) into the
container.
j The LC display 4now automatically shows
the volume of liquid poured into the container,
either in ml or in fl’oz, depending on the setting.
j Then press the mode button 3to set the kitchen
scale to weighing mode again and read off the
equivalent weight of the liquid.
96498_silv_Digitale_Kuechenwaage_Content_GB_IE_FI_SE_DK.indd 10 19.11.13 08:21
