Silvercrest SDL 300 C2 User manual

IAN 298644
DIGITAL SPOON SCALE
Operating instructions
DIGITAL SKEVÆGT
Betjeningsvejledning
DIGITALE LEPELWEEGSCHAAL
Gebruiksaanwijzing
DIGITALE LÖFFELWAAGE
Bedienungsanleitung
DIGITAL SPOON SCALE SDL 300 C2

GB/IE/NI Operating instructions Page 1
DK Betjeningsvejledning Side 13
NL/BE Gebruiksaanwijzing Pagina 25
DE/AT/CH Bedienungsanleitung Seite 37
Before reading, unfold the page containing the illustra-
tions and familiarise yourself with all functions of the
device.
Før du læser, vend siden med billeder frem og bliv
bekendt med alle apparatets funktioner.
Vouw vóór het lezen de pagina met de afbeeldingen
open en maak u vertrouwd met alle functies van het
apparaat.
Klappen Sie vor dem Lesen die Seite mit den Abbildun-
gen aus und machen Sie sich anschließend mit allen
Funktionen des Gerätes vertraut.

2
5
4
6
3
1

SDL 300 C2 GB│IE│NI │1■
Contents
Introduction .........................2
Intended use .........................2
Package contents . . . . . . . . . . . . . . . . . . . . .2
Appliance description..................2
Technical details ......................3
Safety information ....................3
Operation ...........................6
Using the appliance ...................6
Simple measurement.........................6
Totalising function ...........................6
TARE function/measuring in a container..........7
Measuring liquids ...........................7
Hold function (HOLD)........................7
Changing the batteries.................8
Error messages .......................8
Cleaning and care ....................8
Disposal.............................9
Kompernass Handels GmbH warranty ..10
Service ..................................11
Importer .................................12

SDL 300 C2
■ 2 │ GB│IE│NI
Introduction
Congratulations on the purchase of your new
appliance.
You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety ins-
tructions. Use the product only as described and for
the range of applications specified. Please also pass
these operating instructions on to any future owner.
Intended use
This appliance is intended exclusively for weighing
small quantities. This appliance is intended solely
for use in private households. It is not suitable for
commercial use!
Package contents
●Digital Spoon Scale
●2 x 1.5 V AAA/LR03 batteries
●Operating instructions
NOTE
► Before using the appliance for the first time,
check the package contents to ensure that it is
complete and free of visible damage. Remove
all packaging materials and the protective
films from the display 2.
Appliance description
1Spoon
2Display
3∑/UNIT button
4ON/TARE button
5Battery compartment
6HOLD button

SDL 300 C2 GB│IE│NI │3■
Technical details
Power supply: 2 x 1.5 V AAA, LR03
Measurement range: 1–300 g in 0.1 g steps
0.05–10. oz in
0.005 oz steps
Max. quantity for each
individual measurement: 300 g/10.58 oz
Max. quantity for cumulative
measurements: 3000 g/105.8 oz
Measuring accuracy: 0.1 g/0.005 oz
Safety information
Read these operating instructions carefully before
using the appliance for the first time, and retain them
for future reference. Please pass these operating
instructions on to any future owner(s).
WARNING! – RISK OF
INJURY!
► Check the appliance for visible ex-
ternal damage before use. Do not
use an appliance that has been
damaged or dropped.
► This appliance may be used by
children aged 8 years and abo-
ve and by persons with limited
physical, sensory or mental capa-
bilities or lack of experience and
knowledge, provided that they are
under supervision or have been
told how to use the appliance sa-
fely and are aware of the potential
risks. Do not allow children to use
the appliance as a toy. Cleaning
and user maintenance tasks may
not be carried out by children
unless they are supervised.

SDL 300 C2
■ 4 │ GB│IE│NI
WARNING! – RISK OF
INJURY!
► Children should be supervised to
ensure that they do not play with
the appliance.
► All repairs must be carried out by
authorised specialist companies or
by the Customer Service depart-
ment.
Improper repairs can pose signifi-
cant risks to the user. It will also
invalidate any warranty claims.
CAUTION – PROPERTY
DAMAGE!
► Defective components must always
be replaced with genuine replace-
ment parts. Compliance with safety
requirements can only be guaran-
teed if original replacement parts
are used.
► Never place hot food/liquids in the
spoon!
► Do not allow any liquids or moistu-
re to get into the appliance.
► Do not leave objects in the spoon
when the appliance is not being
used.
► Protect the scales from impacts,
moisture, dust, chemicals, extremes
of temperature and keep them
away from heat sources (ovens,
radiators).

SDL 300 C2 GB│IE│NI │5■
CAUTION – PROPERTY
DAMAGE!
► Do not press the buttons with exces-
sive force or sharp objects.
► Do not expose the appliance to high
temperatures or strong electro-
magnetic fields (e.g. mobile pho-
nes).
HANDLING BATTERIES
HAZARDS CAUSED BY
IMPROPER USE!
► Do not throw the batteries into the
fire.
► Do not short-circuit the batteries.
► Do not attempt to recharge the
batteries.
► Check the condition of the batteries
at regular intervals. Leaking battery
acid can cause permanent dama-
ge to the appliance. Special care
should be taken when handling da-
maged or leaking batteries. Risk of
acid burns! Wear protective gloves.
► Store batteries out of the reach of
children. If a battery is swallowed,
seek medical attention IMMEDIA-
TELY.
► If you do not intend to use the
appliance for a long time, remove
the batteries.

SDL 300 C2
■ 6 │ GB│IE│NI
Operation
♦ Open the lid of the battery compartment 5
and insert two 1.5 V AAA/LR03 batteries. Ensu-
re that the battery has the correct polarity.
♦ Close the battery compartment 5.
"0.0 g" appears on the display 2. The appli-
ance is now ready for use.
♦ To change the units, press the ∑/UNIT 3but-
ton until "0.000 oz" appears on the display 2.
Using the appliance
Simple measurement
♦ Switch the appliance on using the ON/TARE
button4.
♦ Place the spoon 1with the contents to be
weighed on a level surface and hold the rear
end firmly to prevent the appliance from tipping.
or
♦ Hold the appliance horizontally in your hand
and keep it as still as possible.
♦ To turn the appliance off, press and hold the
ON/TARE 4button until the display 2goes
out.
or
♦ Wait for approx. 60 seconds. The appliance
switches itself off automatically.
Totalising function
You can add individual measurements (max. 300 g
per measurement) together.
♦ Press the ON/TARE 4button and carry out the
first measurement.
♦ Press the ∑/UNIT button 3button. "∑" and the
weight of the material on the scale appear on
the display 2.

SDL 300 C2 GB│IE│NI │7■
♦ Remove the material from the spoon 1and
add the next portion of material to be weighed.
The weight of the new material is now added to
the previous weight on the display 2and the
total weight is shown.
♦ You can repeat this procedure until you have
reached 3000 g in total weight. If 3000 g is
exceeded, the display 2shows " ".
NOTE
► You cannot use the TARE function while you
are adding weights!
TARE function/measuring in a container
♦ If you want to weigh food in another container,
place the container in the spoon 1first.
♦ Then press the ON/TARE button 4to reset the
display to zero.
♦ When you add the food to the container, only
the weight of the food itself will be displayed.
If you take the container with the food off the
spoon 1, a negative value will be displayed.
♦ Now press the ON/TARE button 4again to
return to the normal weighing mode.
Measuring liquids
The scale in the spoon 1can be used for measuring
liquids (15–45 ml or 1–3 tablespoons).
However, due to optical displacement, differences
of up to 15% can occur.
Hold function (HOLD)
If you press the HOLD button 6while a weight is
being displayed, the weight display will be retained
even if you remove the contents from the spoon 1.
If you then press the HOLD button 6again, you
will deactivate the hold function and the current
weight will be displayed again.