Standard Feature Details
Five Class B IDCs are each capable of supporting up to 30
Simplex current-limited smoke detectors or electronic heat
detectors (see list on page 4) as well as manual stations and
other compatible contact closure initiating devices. IDCs
are capable of Class A operation with an optional adapter
module and can be programmed as Style C (short or open
initiates a trouble) for use with current limited devices only.
Two, 2 A On-Board NACs provide conventional reverse
polarity operation, selectable as Class A or Class B, with
electronic control and overcurrent protection. Operation is
selectable for synchronized strobe or SmartSync horn/strobe
two-wire operation. Horn control can be selected at the panel
for: Temporal pattern coding, Steady On, Slow March Time
of 20 beats per minute (BPM), or Fast March Time of
120 BPM. Note: When selected for SmartSync horn/strobe
control, March Time produces 60 BPM.
The 24 VDC Auxiliary output provides up to 500 mA
for system use. (Auxiliary output current is counted for
total power supply capacity.)
Standard Auxiliary Relay Outputs. Two relay outputs
are available, selectable as normally open or normally
closed, rated 2 A @ 30 VDC per below:
Aux Relay 1 is normally assigned to General Alarm
operation but is programmable (see page 7)
Aux Relay 2 (Trouble) is energized when Normal and is
de-energized with a Trouble condition.
On-Board Dual Line DACT. Operation can be selected
for Contact ID, SIA, 3/1, 4/2, and BFSK formats.
Reporting includes Alarm, Supervisory, Trouble, and AC
Failure. Operation includes automatic 24 hour test and
programmable power fail report delay.
Standard Feature Details (Continued)
Power Supply and Battery Charger.DC power output
is 3 A @ 24 VDC for panel use. The temperature
compensated battery charger (sealed lead-acid batteries
only) is rated for up to 25 Ah batteries per UL 864 and up
to 12.7 Ah per ULC-S527. (Up to 12.7 Ah batteries fit in
the cabinet, larger batteries require an external cabinet.)
Panel electronics can measure and display voltage and
current for the power supply, batteries and the battery
charger (standard and expansion power supply). Depleted
battery trouble is monitored and annunciated and depleted
battery cutout can be selected. Active battery status
monitor supervises charger operation.
Optional Feature Details
Expansion Power Supply. Provides 3 A total @
24 VDC, two additional 2 A NACs, and an additional
auxiliary power output of 500 mA. Output operation is the
same as on the standard power supply.
Expansion IDC Module. Provides 5 additional Class B
IDCs with operation the same as the standard IDCs.
Expansion Relay Module. Provides 10 programmable
relays, jumper selectable as N.O. or N.C. Contacts are
rated 2 A @ 30 VDC. Typical application is to track
status of each IDC. See page 7 for relay program options.
Class A Adapter Module. Converts 5 IDCs from
Class B to Class A operation. Two modules can be
mounted for use with the Expansion IDC Module.
City Circuit Modules.These modules are available with
or without on-board disconnect switches, depending on
local requirements (either type can be disconnected
through the front panel under password control).
Connections are for Remote Station (reverse polarity) or
Municipal Master (local energy). Reporting includes
Alarm, Supervisory, and Trouble.
2 S4006-0001-8 8/2012
Control Panel
Model Color Description Listings Standard Feature Summary
4006-9102 Beige Standard fire alarm control panel MEA UL, FM,
& CSFM
5 Class B IDCs, 2 Class B/Class A
NACs, 3 A power supply with battery
charger; on-board DACT; 120/240 VAC,
50/60 Hz (autoselect)
4006-9101 Red
4006-9122 Beige Fire alarm control panel with 24 LED
Annunciator on front door ULC
4006-9121 Red
Option Modules
Model Description
4006-9801 Expansion Power Supply; 3 A, with 2 NACs, 120/240 VAC, 50/60 Hz
Select up to one of each as required
4006-9802 Expansion IDC Module; 5 Class B IDCs
4006-9803 Expansion Relay Module; 10 relays selectable as either N.O. or N. C.
4006-9804 Class A Adapter Module; converts 5 IDCs from Class B to Class A Select up to two maximum
4006-9805 City Circuit Module with disconnect switch Select one if required
4006-9806 City Circuit Module without disconnect switch
Accessories
Model Description
2975-9811 Beige semi-flush trim kit; 1-7/16” (37 mm) wide; includes four corners and trim pieces for top, bottom, and sides
2975-9812 Red semi-flush trim kit; 1-7/16” (37 mm) wide; includes four corners and trim pieces for top, bottom, and sides
4009-9801 Beige External Battery Cabinet for up to 25 Ah batteries; mounts close-nippled to control panel cabinet; dimensions =
16-1/4” W x 13-1/2” H x 5-3/4” D (413 mm x 343 mm x 146 mm) [depth increased for 25 Ah effective 7/2005]
Batteries, 12 Volt (select one battery model per system standby requirements; order quantity of two)
Model Size Model Size Location Model Size Location
2081-9272 6.2 Ah 2081-9288 12.7 Ah For cabinet mount 2081-9275 18 Ah
Requires 4009-9801 External Battery
Cabinet (UL listed only)
2081-9274 10 Ah 2081-9827 25 Ah
Product Selection
