Siqura BL1103M1-EI User manual

Use DHCP server
(a)
BL1103M1-EI
3 MP Intelligent IP bullet camera
Quick Start Guide
© Siqura B.V. 2017
Version 1.1 (160707-1.1)
bl1103m1ei QSG (MW10)
Insert Micro SD card / Reset
Unpack
Connect
Use fixed IP address
Mount
Note: Subject to modification. Actual product and accessories may differ in appearance.
DHCP
Network switch IP = 10.x.y.z
IP = 10.x.y.z
DHCP:
IP = 10.x.y.z
DHCP
Network switch IP = 192.168.1.x
IP = 192.168.1.x
DHCP:
30 s
2 ~ 253
RJ-45
802.3af PoE
12 Vdc
Digital I/O
Note: Camera breakout cable connectors are labelled with their function and polarity.
Note: For mounting instructions for pole mount or wall mount, see respective manuals.
 Tilt angle (1)
 Pan angle (2)
 Camera rotation(3)
0°~360°
2
3
0°~360°
0°~100°
1
Micro SD/SDHC/SDXC
(up to 128 GB)
Reset button
Serial port
(debugging only)
Find additional manuals, the datasheet,
the EU Declaration of Conformity and the
latest firmware for this product at:
http://www.tkhsecurity.com/support-files
http://www.tkhsecurity.com
http://www.tkhsecurity-usa.com
Note: Use Device Manager (see next) to discover the camera on the network.
*Reset button: Press and hold for 10 sec. when powering on or rebooting.
Warning: Restores factory default settings, including IP address, user name and password!

View live video
Initialise lens / Adjust focus
Install Device Manager (optional)
Change IP address via Device Manager
Open web interface via Device Manager
Set password
12
1
2
3
Focus +
Focus -
Lens initialisation
Auxiliary focus
(push to focus)
1
2
3
Important: 1103 series cameras require Device Manager version 1.8.1 or later.
Replace an existing, older installation of this tool on your PC, if necessary.
Administrator / End User
Set a strong password!
qwerty1234
x6W@oM0a!9#F
Note: For information about user accounts and passwords, see User Manual.