Sister Bay Hudson Barstool 20-3 User manual

WARNING:
Using power tools may result in overtourquing screws causing threads to strip.
We are not responsible for replacements on parts where powertools where used.
CARE & MAINTENANCE: To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners or ask your Sales Representative about
Sister Bay Furniture Cleaner.Please contact our Customer Service Department for assembly assistance, questions or replacement parts at [phone] or email
[email protected]. Our Customer Service Department is available Monday-Friday 8:30 a.m. to 4:30 P.m. CST
2
HDPE
HARDWARE:
PARTS:
18x
0-5223
#8x1.25"
1x
R2 SQ Bit
Multi-Bit Screwdriver
(Not Included)
1x
20 Top
1x
20 Back Legs
1x
20 Front Legs
1x
20 Leg Side
Brace
MODEL No: 20-3
Hudson
Collection
Barstool.

1 2
A
DETAIL A
Place legs back on the top. A.
Fasten into place with [2x] screws through the skirt and into the leg (DETAIL A). B.
Repeat step 2B for the other leg. C. Lay top on cardboard or other flat surface to avoid scratches on surface. A.
MODEL No: 20-3
Hudson
Collection
Barstool.

3 4
B
DETAIL B
C
DETAIL C
Put Leg Side Brace between the two legs, aligning holes. A.
Fasten into place with [4x] screws through the brace into the leg. B.
Repeat steps 3A-3B for the other brace. C.
Place Front Legs on top. A.
Repeat steps 2B-2C from previous step. B.
MODEL No: 20-3
Hudson
Collection
Barstool.

Final Setp:
Sit on the stool, lean forward to rest your left arm on your
left leg. Then rest your chin on your right hand while the
right arm's elbow sits on your left leg. Congrats you have
posed as "Le Penseur" (The Thinker) by Auguste Rodin.
MODEL No: 20-3
Hudson
Collection
Barstool.