Sister Bay Napa MNAP-76-100 - R User manual

2.75
2.75
(12)
D
(16)
E
(8)
(8)
( Table Top )
( Leg
Assembly )
( Mid Cross)
(Brace )
(Table Leaf )
N
( Leg Brace
1,2 & 3 )
I
(8)
A
B
C
H
M
L
K
(Leg leaf)
(block)
O
(Center Leaf)
(storage block)
7/16" socket head wrench
( not included )
ALLEN WRENCH
( included )
Do not use
any hand drill
on this product
ADJUSTABLE WRENCH
( NOT INCLUDED )
You will also need a phillips-head screwdriver
( not included )
Hardware and Parts
Item No: MNAP-76-100 - R
Napa Extension Table
Assembly Instructions
1 - Attach part ( I ), Leg Assembly, and to part (H) Table Top, as shown in Figure 2, see detail 2 using (8) of joint
connector bolts (A) , (16) washers (B), (8) lock washers , (C) and (8) hex nuts (D), tighten bolts using an allen
wrench and also an adjustable wrench.
Figure 1
I
( Leg Assembly )
(Table Top )
H
A
D
B
C
( Detail 1 )

2 - Attach parts (L), Leg Brace 1 & 2
to Assembly from figure 3, as shown
in figure 4, see detail 4 ,using ( 8 )
of screw ( E ), tighten screws using
an Allen Wrench .
( Detail 3 )
E
E
( Detail 2 )
( Mid Cross Brace )
M
(Leg Brace 1 & 2)
L
Figure 2
Figure 3
CARE AND MAINTENANCE
To clean your product, use mild soap and water. For heavy soil build-ups use any non-abrasive household cleaners
or ask your Sales Representative about Sister Bay Furniture Cleaner.
Please contact our Customer Service Department for assembly assistance, questions or replacement parts at 1-866-947-7632
or email [email protected]. Our Customer Service Department is available Monday - Friday from 8:30 a.m. to 4:30 p.m. EST
3 Attach part (M), middle Cross Brace ,
to assembly from figure 4, as shown
in figure 5, see detail 5, using ( 4 ) of
screw ( E ). Tighten bolts using an
allen wrench.