SKF TKSA 11 User manual

SKF Shaft Alignment Tool
TKSA 11
Quick Start Guide
1. Description
18 3 4 2
6
7
5
1. Measuring unit 5. Two inductive proximity sensors
2. Power button 6. V-Bracket with locking chain
3. Connection blue LED 7. Magnetic bar holder
4. Status red/green LED 8. Reference bar

2 SKF TKSA 11
2. Installing the App
“SKF Shaft Alignment Tool TKSA 11”
EN Install the App
FR Installer l’application
DE Installation der App
ES Instalar la App
IT Installare la App
PT Instalação do Aplicativo
ZH 安装App应用程序
RU Установка приложения
1. Turn on Wi-Fi and connect to a network
Se connecter au réseau avec le Wi-Fi activé
WLAN anstellen und Verbindung zu einem Netzwerk herstellen
Activar el Wi-Fi y conectarse a una red
Accendere il Wi-Fi e connettersi a una rete
Ligue o Wi-Fi e conecte-se a uma rede
打开Wi-Fi,连接到网络
Включите Wi-Fi и подключитесь к сети
2. Go to the App Store Icon
Cliquer sur l’icone App Store
App Store Icon auswählen
Ir al icono de la App store
Aprire l’icona dell’App store
Vá para o ícone da loja de aplicativos
进入App商店
Выберите пиктограмму App Store
3. Tap the search area
Cliquer sur la zone de recherche
Suchleiste auswählen
Pulsar sobre la zona de búsqueda
Posizionarsi nell’area di ricerca
Vá para área de busca
点击搜索栏
Прикоснитесь к области поиска
4. Enter “SKF TKSA 11”
Entrer “SKF TKSA 11”
Eingabe “SKF TKSA 11”
Escribir “SKF TKSA 11”
Inserire “SKF TKSA 11”
Digite “SKF TKSA 11”
输入SKF TKSA 11
Введите “SKF TKSA 11”

3SKF TKSA 11
5. Tap “Free”
Cliquer sur “Free” (“Gratuit”)
Auf “Free” tippen (“Gratis”)
Pulsar en “Free” (“Gratis”)
Selezionare “Free”
Acione “Free”
点击 “Free”
Нажмите кнопку “Free” (Бесплатно)
6. Tap “INSTALL”
Saisir “INSTALL” (“Installer”)
Auf “INSTALL” tippen (”Laden”)
Pulsar en “INSTALL” (”Instalar”)
Selezionare “INSTALL”
Acione “INSTALL”
点击 “INSTALL”
Нажмите кнопку “INSTALL” (Установить)
7. If asked, enter your Apple ID password
Taper, si nécessaire, le mot de passe de votre identifiant Apple
Bei Nachfrage bitte Apple ID Passwort eingeben
Si se le pide, introduzca la contraseña asociada a su cuenta Apple
Se richiesta, inserire la password del vostro ID Apple
Se solicitado, digite a sua senha Apple ID
如果需要，请输入App ID 密码
При необходимости введите свой пароль для Apple ID.
8. Wait for the App to be downloaded
Attendre que le téléchargement de l’application soit terminé
Abwarten bis die App heruntergeladen ist
Espere a que la aplicación se descargue
Attendere la fine del download della App
Aguarde o download do aplicativo
等待App下载
Дождитесь завершения скачивания приложения.
9. Open the Shaft Alignment App
Ouvrir l’application alignement
d’arbres
App zur Ausrichtung von
Wellen starten
Abra la App dedicada a la
alineación de ejes
Aprire la App
Abra o aplicativo de alinhamento de eixo
打开轴对中 App应用程序
Откройте приложение для выверки соосности валов.

4 SKF TKSA 11
3. Mounting the measuring unit
Mount the Measuring unit on the Moveable machine
(Motor) side.
Adjust the gap between the inductive proximity sensors and
the reference bar to app. 3 mm ±0,5 mm (120 mils ±20 mils).
“Sensor status” in the app indicates the correct distance.
The TKSA 11 can be
mounted directly on
couplings when needed.

5SKF TKSA 11
4. Compatible devices
• iPod Touch 5th generation and above
• iPhone 4S, iPhone 5 and above
• iPad mini and above
• iPad 3rd generation and above
5. SKF Alignment
website
www.SKF.com/alignment
Safety recommendations
• The complete instructions for use are available on SKF.com
and within the SKF TKSA 11 app.
• Read and follow all warnings in this document before handling
and operating the equipment. You can be seriously injured,
equipment and data can be damaged if you do not follow the
safety warnings.
• Always read and follow the operating instructions.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing, and gloves away from moving parts.
• Do not overreach. Keep proper footing and balance at all
times to enable better control of the device during unexpected
situations.
• Use safety equipment. Non-skid safety shoes, hard hat or
hearing protection must be used for appropriate conditions.
• Never work on energized equipment unless authorized by
a responsible authority. Always turn off the power of the
machine before you start.
• Do not expose the equipment to rough handling or impacts
this will void the warranty.
• Avoid direct contact with water, wet surfaces, or condensing
humidity.
• Do not attempt to open the device.
• Use only accessories that are recommended by SKF.
• Device service must be performed only by qualified SKF repair
personnel.
• We recommend calibrating the tool every 2 years.

SKF Maintenance Products
® SKF is a registered trademark of the SKF Group.
© SKF Group 2017/08
www.mapro.skf.com • www.skf.com/mount • MP5432
The contents of this publication are the copyright of the publisher and may not be reproduced (even
extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy
of the information contained in this publication but no liability can be accepted for any loss or damage
whether direct, indirect or consequential arising out of use of the information contained herein.
EU Declaration of conformity
We,
SKF Maintenance Products
Kelvinbaan 16
3439 MT Nieuwegein
The Netherlands
herewith declare that the following product:
SKF Shaft Alignment Tool
TKSA 11
has been designed and manufactured in accordance with:
RADIO EQUIPMENT DIRECTIVE 2014/53/EU as outlined in the
harmonized norm
EN 61010:2010, EN 61326-1:2013 Class B, group 1 equipment
IEC 61000-4-2:2009, IEC 61000-4-3:2006
EN 301 489-1 v2.1.1, EN 301 489-17 v3.1.1, EN 300 328 v2.1.1
EUROPEAN ROHS DIRECTIVE 2011/65/EU
The enclosed device complies with Part 15 of the FCC Rules.
Contains FCC ID: QOQBLE112
Certification Number: IC: 5123A-BGTBLE112
Manufacturer’s Name, Trade Name or Brand Name: bluegiga
Model Name: BLE112-A
Nieuwegein, The Netherlands,
August 2017
Sébastien David
Manager Product Development and Quality