SKYDANCE T18-1 User manual

86mm
86mm
36.5mm
Dimension
Summary
Technical Parameters
Wall Mounted Touch Panel
4 Zone 0/1-10V Dimmer
Key function
On/Off: , Short press turn on/off current zone light
long press 2s turn off all zone light .
Brightness slide : Touch to change current zone bright.
Short press select and turn on zone light,1,2,3,4 Zone:
long press 2s turn off zone light.
Continuous short press multiple zone key,
can synchronous select multiple zones.
S1,S2 , .,S3: Short press run the scene long press 2s save
4 zone run or save synchronously.
Brightness slide
3 Scene
On/Off
4 Zone
● Match with 4 zone dimming remoter, such as RU4, R6, R16.
● Match: Turn on light, turn off, immediately press on/off key for 5s,
within 5s, press any key of the remoter.
● Delete: Turn on light, turn off, immediately press on/off key for 10s, delete all matched remoters.
Panel controller match remoter method
Wiring diagram
AC85-265V
Power input
L
N
T18-1
● 4 zone 0/1-10V dimmer, output 4ch 0/1-10V signal.
● Output connect with 0/1-10V dimmable power supply
or other 0/1-10V dimming driver.
● Ultra sensitive high strength glass touch panel with
touch color slide, accurate and fast control of brightness.
● Reliable and stable switch and dimming control without
flicking.
● 256 levels brightness adjustment.
● Can match remoter optional, realize remote dimming.
● Adopt 2.4GHz wireless technology, compatible with
a variety of remoter, up to 10 remoter control.
● : AC85~265VInput voltage
● signal: 4ch x 0/1-10VOutput
● Grey levels: 4096
● Dimming range: 0~100％
● Remote distance: 30m
● Working temperature: -30℃~55℃
● : L86×W86×H36.5mmProduct size
● Net weight: 133g
T18-1
0/1-10V LED Dim mer
1
-
LN
0/1-10V Output 85-2 65VAC
INP UT
Uin =85 -26 5VAC
Iin =Max 5 0mA
Out =4×(0 /1- 10V )Signal
0.5-2.5mm²
6-7mm
RoH S
2
3
4
+
Single color LED strip
V+
V-
DIM+
DIM-
ACN
ACL
0-10V Dimmable
Power Supply
AC110-230V
+
Single color LED strip
V+
V-
DIM+
DIM-
ACN
ACL
AC110-230V
+
Single color LED strip
V+
V-
DIM+
DIM-
ACN
ACL
AC110-230V
+
Single color LED strip
V+
V-
DIM+
DIM-
ACN
ACL
AC110-230V
0-10V Dimmable
Power Supply
0-10V Dimmable
Power Supply
0-10V Dimmable
Power Supply

1. Flip panel, inserted into the card edge aperture with a small screwdriver, gently
pry and open the panel. pull out FPC lock catch, then remove FPC line.
Installation diagram
2. After connect wires, put bottom case into 86 bottom box, put in the screw
and tighten.
3. Connect FPC line. then from top to bottom, moderately cover upper case,
complete installation.
bottom case upper case
NOTES:
● In order to ensure safety, turn off the power first before wiring, ensure correct wiring
to avoid short circuit.
● In the process of installation, do not damage or twist FPC line, in order to avoid damage.
bottom case
upper case
Malfunctions analysis & troubleshooting
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid the sun and rain.
3. Good heat dissipation will prolong the working life of the controller,please ensure good
ventilation.
4. Please check if the output voltage of any power supplies used comply with the working voltage
of the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to
avoid any damages to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product
by yourself.
Safety & Warnings
Malfunctions
Causes Troubleshooting
No response
from the remoter
1. The battery has no power.
2. Beyond controllable distance.
3. The controller did not match the
remoter.
1. Replace battery.
2. Reduce remote distance.
3. Re-match the remoter.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
No light
Warranty Agreement
1. 5-year warranty:
● The warranty is for free repair or replacement and covers manufacturing faults only.
● Do not include fees of on site maintenance and consumable parts.
2. Limited Warranty
● Artificial damage caused by improper use, such as use inappropriate power supply,
improper accessories, improper installation, did not follow the instructions, error using
or negligence.
● Any damages caused by force majeure, such as natural disaster, abnormal voltage.
● The normal use of products caused by aging, wear and tear, but it does not affect the
normal use.