SKYDANCE S1-HV User manual

Technical Parameters
1
User Manual Ver 1.0.0
Features
MechanicalStructuresandInstallations
Dimming range
4096 (2^12) levels
0-100%
Input signal
Dimming gray scale
2KHz
PWM Frequency
Input and Output
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Gross weight
Size
Package
Case temperature (Max.)
Tc: +85
O
C
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certication CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Warranty
5 years
Warranty
Dimming data
Model No.: S1-HV
High voltage LED Strip RF dimmer
● High voltage LEDStrip RF 2.4G dimmer, can control maximum about 25 meters of
high voltage LED strip, different LED strip may have difference.
● Match with RF 2.4G single zone or multiple zone single color remote control.
● One RF controller accept up to 10 remote control.
● Auto-transmitting function: Controller automatically transmit signal to
another controller with 30m control distance.
● Synchronize on multiple number of controllers.
● 4096 levels 0-100% dimming smoothly without any ash.
● Light on/off fade time 3s selectable.
● Connect with external AC push switch to achieve on/off and 0-100% dimming function.
Output power 150-360W
Output voltage 100-240VDC
Output current Max 1.5A
Input voltage 100-240VAC
Input current 1.7A
RF 2.4GHz + Push Dim
AC N input AC L input
Output LED +
LVD RED
Match remote control
Use the Match key
Match:
Short press match key,
immediately press on/off key (single zone remote) or zone key
(multiple zone remote) on the remote.
The LED indicator fast flash a few times means match is successful.
Use Power Restart
Match:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again.
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.
Delete:
Press and hold match key for 5s,
The LED indicator fast flash a few times means all matched remotes
were deleted.
End user can choose the suitable match/delete ways. Two options are offered for selection:
1Channel/Step-less Dimming/Push-Dim/Wireless Remote Control
AC Push input
Output LED-
56.00 mm
49.50 mm
56.00 mm
28.00 mm
Match key
56.00 mm
37.00 mm
25.00 mm
V-V+ L P N
INPUT
100-240VAC100-240VDC
OUTPUT
L56xW56xH35mm
0.067kg

Wiring Diagram
2
User Manual Ver 1.0.0
This controller apply for high voltage LED strip, please carefully ensure all wire connections and polarities are correct and secure before applying power,
otherwise this dimmer or high voltage LED strip will be damaged.
Caution:
AC Push Dim Function
Short press: Turn on or off light.
Long press (1-6s): Press and hold to step-lessdimming, With every other long press, the light level goes to the opposite direction.
Dimming memory: Light returns to the previous dimming level when switched off and on again, even at power failure.
Long press match key 5s, then short press match key 3 times,
The lighting effect will be set to the fade in and fade out in 3s, the indicator light of LED controller blinks 3 times.
Long press match key 10s, restore factory default parameter, the light on/off time restores to 0.5s.
Fade in and Fade out Setting
AC100-240V
High voltage single color LED strip
V-V+ L P N
INPUT
100-240VAC100-240VDC
OUTPUT
Push Switch
N
Dimming remote
Application notes
1. All the receivers in the same zone.
2. Each receiver(one or more) in a different zone, like zone 1, 2, 3 or 4.
Zone 1 Zone 2
RF remote
30m
Auto-transmitting: One receiver can transmit the signals from the remote to another receiver within 30m,
as long as there is a receiver within 30m, the remote control distance can be extended.
Auto-synchronization: Multiple receivers within 30m distance can work synchronously when they are controlled by the same remote.
Receiver placement may offer up to 30m communication distance. Metals and other metal materials will reduce the range.
Strong signal sources such as WiFi routers and microwave ovens will affect the range.
We recommend for indoor applications that receiver placements should be no further apart than15m.
30m
Zone 3
30m
Zone 4
RF remote
30m30m
Installation clip
Note:
1. The installation must be installed or removed by a professional electrician.
2. Please keep the device out of the reach of children.
3. Please keep away from water, humid or hot environment.
4. The device should be kept away from strong signal sources (such as microwave ovens) to avoid signal interruption and cause the device not to work properly.
5. Avoid placing the device close to or near high-density materials (such as metal, concrete walls, etc.), which will reduce or block the wireless signal.