SKYDANCE T18 User manual

1
User Manual Ver 1.1.3
Features
Technical Parameters
Input and Output
Operation temperature
Environment
Ta: -30
O
C ~ +55
O
C
Gross weight
Size
Package
Case temperature (Max.)
IP rating IP20
Ta: +65
O
C
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Radio Equipment(RED) ETSI EN 300 328 V2.2.2
Certication CE,EMC,LVD,RED
EN 62368-1:2020+A11:2020
Safety standard(LVD)
Warranty
5 years
Warranty
Mechanical Structures and Installations
Model No.: T18
0-10V Touch Glass Panel Dimmer
1 zone/Touch glass panel/Brightness slide/Wireless remote control
● Touch panel 0-10V dimmer, output 1 channel 0-10V signal.
● Output connect with 0/1-10V dimmable driver.
● Ultra sensitive high strength glass touch panel with touch slide in the middle.
RF 2.4G dimming remote control● Compatibility with .
● Touch keys with LED indicator.
● White & Black glass panel available.
LVD
Output current 20mA/CH
Input voltage AC100-240V
Touch key + RF 2.4GHz
10m(Barrier-free space)
256 levels
0 -100%
Output signal 0-10V (50mA)
Dimming data
Dimming range
Input signal
RF Control distance
Dimming gray level
L112x W112 x H50mm
0.238kg
86.00 mm
86.00 mm
52.00 mm
52.00 mm
59.00 mm
33.00 mm
11.50 mm
AC L input
AC N input
0-10V signal output GND
AC N output
AC L output
LN
+
-
NL1
AC IN
AC OU T
0-10V O UT
T18
Typical base as below:
European style 86 size
Installation diagram:
Baseplate Base
Uninstall Touch panel
Match Remote Control (two match ways)
End user can choose the suitable match/delete ways. Two options are offered for selection:
The 0-10V touch panel dimmer can also match with the RF dimming remote (optional).
Use On/Off key Use Power Restart
Match:
Turn on light, turn off, immediately press the On/Off key of the panel for 5s,
then press on/off key (single zone remote) or zone key (multiple zone remote)
of the RF remote within 5s.
The LED indicator fast flash 3 times means match is successful.
Delete:
Turn on light, turn off, immediately press the On/Off key of the panel for 10s to
delete all match,
The LED indicator fast flash 6 times means all matched remotes were deleted.
Match:
Switch off the power, then switch on power, repeat again,
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 3 times on the remote.
The light blinks 3 times means match is successful.
Delete:
Switch off the power, then switch on power, repeat again,
Immediately short press on/off key (single zone remote)
or zone key (multiple zone remote) 5 times on the remote.
The light blinks 5 times means all matched remotes were deleted.

AC110-220V
V+
V-
DIM+
DIM-
ACN
ACL +Single color LED strip
0/1-10V
Dimmable Driver
LN
+
-
NL1
AC IN
AC OU T
0-10V OU T
T18
Wiring diagram
● Connect with 0/1-10V dimming driver (no use AC OUT)
AC110-220V
V+
V-
DIM+
DIM-
ACN
ACL +Single color LED strip
0/1-10V
Dimmable Driver
LN
+
-
NL1
AC IN
AC OU T
0-10V OUT
● Connect with 0/1-10V dimming driver (use AC OUT)
AC110-220V
V+
V-
DIM+
DIM-
ACN
ACL
+Single color LED strip
0/1-10V
Dimmable Driver
Relay or
Contactor
LN
+
-
NL1
AC IN
AC OU T
0-10V OUT
● Connect with 0/1-10V dimming driver (use AC OUT and relay or contactor)
An additional AC relay or contactor is needed when total input current of the load is higher than 1.5A or inrush current is greater than 15A.
Note: We recommend the number of LED drivers connected to 0/1-10V dimmer does not exceed 100 pieces, the maximum length of the wires from dimmer to
LED driver should be no more than 50 meters.
2
User Manual Ver 1.1.3
Bright
Pow er
20S
Del ay Off
Mod e
Bri ght
Brightness,10 levels.
Note: The default output is 0-10V, if you want to 1-10V output,
please touch power key to turn off light,
then long press power key for 15s immediately, the output will become 1-10V.
Touch power key to turn off light, then long press power key for 10s immediately,
the output will return 0-10V.
Key function
Power
Mode
20S
Delay Off
Turn on/off light.
Play dynamic mode, 6 level speed.
Turn off light after 20s.
T18
T18