SkyLink UR-100 User manual

Installation for the Universal Receiver UR-100
1. Plug in the UR-100 into an electrical outlet inside the
garage.
2. Connect a wire (included with the UR-100 kit) from the
UR-100 to the existing garage door push button.
3. Set the DIP switches of both the Skylink transmitter
and UR-100 so that their DIP settings match each other
in order for them to communicate properly.
4. Refer to the UR-100 user's instruction, set the operation
frequency and/or brand jumper setting for the Skylink
transmitter.
5. All Done!