Skymen JP-009 User manual

Application:
Electronic factory, utensil, hardware, machinery, communication, biological,
medical instrument, glasses,Optical, Jewelry, clock, watch, chemical, Textile,
auto part, Ships, aviation, mining area, commercial cleaning.
JP-009 JP-010SJP-010T
Instruction Manual
ULTRASONIC CLEANERSKYMEN MANUFACTURE
Professional manufacturer focus on ultrasonic technology R&D
The pictures in this manual are for reference only.
Please refer to the real products.

Thank you for purchasing our company's products, this manual is mainly to explain some
necessary precautions during installation and use. Before the operation. Please read this
manual first, in order to fully understand the operating procedures of this product, please
keep the manual for reference anytime. Before connecting the power, please confirm
whether it is within the rated range. Do not modify this product. Please note that The machine
control panel will be affected by organic solvents, strong acid, strong alkali erosion .This
product may cause some interference to some electromagnetic communication devices,
such as mobile phones, Bluetooth, etc. When installing .pls place it horizontally, do not cut
diagonally, to prevent liquid from flowing out
THE BASIC PRINCIPLE OF ULTRASONIC CLEANING
The cleaner uses ultrasonic energy in the form of sound waves to create millions of tiny micro-
scopic bubbles in the solution that even works its way into holes and hidden cavities, loosening
dirt on all surfaces that the solution touches. This action called cavitation, occurs thousands of
times per second to gently yet thoroughly scrub contamination off the article being cleaned.
When you lift the item out of the cleaner, it’s microscopically clean.
1．Ensure the power supply is in rated range before power cable is connected.Refitting is strictly
prohibited! Attention that the control panel will be eroded by organic solution,strong acid and
strong alkali.
2．Ensure the earth wiring is well connected before starting.
3．Ensure the power switch should be placed in the “O” position before starting.
4．Do not operate if the tank is empty,or ultrasonic generator will be damaged.If heating is
needed,the water level shouldn,t be less than2/3.
6．Please close the lid to reauce noise and pay attention to water and steam in case of burning
skin while open the lid.
7．Do not relocate the machine when fluid in the tank in case of overflow.
8．Please choose the proper sizes or types of baskets according the object to be cleaned
9．Suggest using water-soluble liquid for bentchtop ultrasonic cleaners. Strong acid or flamma-
bility cleaner is forbidden.Donot heat when using flammable liquid such as alcohol, gasoline, etc.,
heating is strictly prohibited , ultrasonic vibration for a long time cause temperature of liquid
increase, caution fire!
10．Do not use the machine in severe environment：
The place where temperature changes fiercely; The place where humidity is too high and
is easy to produce dew; The place where vibration or impact is strong; The place where
exists corrosive gas or dust; The place where water, oil or chemicals splash; The place
where is filled with explosive and flammable gas;
NOTES BEFORE USE
PREFACE OFUSE
www.skymen.cc

JP-009 JP-010T
Heater indicator
Timeset
Degas ON/OFF
Degas indicator
Heater ON/OFF
Digital display
screen
Ultrasonic
indicator
Ulrtasonic
ON/OFF
www.skymen.cc
PRODUCT DRAWING&INDICATION
Power switch
Fuse（a backup fuse）
The power plug
Power plug
Back
Cleaning basket
Stainless steel
body
Control board
Corner pad
Handle
Tank
Lid
Cleaning basket random delivery，because of
different production batches and changes

TEMP+ TEMP-
010S
Temp-
Temp+
Digital display
screen
Heater indicator
Tank
Cleaning basket
Stainless
steel body
Power plug
JP-010S
Heater
ON/OFF
Time+
Time-
Digital display
screen
Ultrasonic indicator
Ulrtasonic
ON/OFF
Control board
Power switch
Fuse（a backup fuse）
The power plug
Back
Lid
Corner pad
www.skymen.cc
Cleaning basket random delivery，because of
different production batches and changes

JP-009、JP-010T
JP-009、JP-010T
JP-010S
Degas light will be on if press”DEGAS”,that is,ultrasonic will work 9 seconds, then pause 6 seconds until
the default time is over.
This operation is applicable to models with degasification. 010S does not have degasification
Heater light will be on when touch “HEAT”; heater will be automatically off when
temperature up to 65℃.Touch the button again if need pause.
Set the working time, 7setting times can be chosen: 60s, 180s, 300s, 600s, 30-
mins, 60-mins. Touch “ON/OFF” button after set the time well, ultrasonic light
will be on and machine starts to work until the default time is over. Touch
“ON/OFF” again if need to pause when working.
JP-010S
DEGAS FUNCTION
Plug the cleaner into a grounded outlet. Turn on the power switch at the
tank back, then machine is power on.("O" is closed, and " " is open)
Add appropriate amount of cleaning solution to the cleaning tank accord-
ing to the cleaning. Ensure that the liquid level is not lower than the inner
tank height by 2/3 when the heating is turned on. Use flammable liquids
such as alcohol, gasoline, etc. It is forbidden to heat. Long-term vibration
will cause liquid increase in temperature, beware of fire!
1. Add cleaning liquid
2. Open power
For the first Boot, time display show setting time at random, press/touch time key
+ one time, ‘’the setting time’’ on the display increase by 1 minute corresponding-
ly, Touch time - Key to decrease time setting by 1 minute. Touch ON/OFF switch
after set the time well, ultrasonic indicator turns red and machine starts working
based on specified the parameters, meanwhile timer begin to count down and
stop working until time shows”00:00”, automatically.
For the first boot, the setting temperature on the display is random, and actual
temperature is room temperature. Touch TEMP+ once to increase temperature
by 1℃; Touch TEMP- once to decrease temperature by 1℃. Temperature
display shows setting temperature and actual temperature when heater is
working, the heater indicator goes off when actual temperature reaches setting
temperature.
OPERATION STEPS
Before Operating Your Cleaner
Start ultrasonic cleaning
Heat
www.skymen.cc

Product specifications
Model Frequency
Capacity Heating power
Ultrasonic power
Transducer
(KHz) (Pcs) (L) Tank size Unit size Time
Temperature
(mm) (mm) (W) (W) (M) (℃)
JP-009
JP-010T
JP-010S
40
40
40
1
1
1
1.3
2
2
150x135x65
150x135x100
150x135x100
175x160x175
175x160x210
175x160x210
100
100
100
60
60
80
0~60
0~60
0~30
room temp ~65
room temp ~65
room temp ~80
Press “ON/OFF” to stop working and then cut off the power. empty out the liquid, clean the tank
and the unit with cloth for next use.
DIGITAL SERIES
Power OFF
(The size is manual measurement, please refer to the actual product)
www.skymen.cc

APPLICATION
Full series standard ultrasonic cleaners are made up of high quality stainless steel plate, which is
corrosion resistance and long lifespan, adopt with high quality ultrasonic transducer and advanced
adhesive technology, high electro-acoustic conversion efficiency and strong ultrasonic power
output. Equipped with automatic constant temperature heating device, heating range: room
temperature~80℃
Skymen ultrasonic cleaner widely applied to industry of precision electronics, painting, filter
system, watch-clocks, glass, metal, jewelry, and medical instruments deaning etc.
Industry
Semi-
conductor
Integrated circuit, power tube, slicon wafer, diode, lead frame,
capillary, tray, etc
Hards, etching oil,stamping oil,
pollshing wax, dust partides,etc
Electrical&
electronic
machine
Tube parts, cathode ray tube, printed circuit board, quartz parts,
electronic components, telephone switching equipment, speaker
components, power meter, LCD glass, core iron parts, computer
floppy disk, vido parts, hoop parts, head, photo die mask,etc
Fingerprint,powder,cutting oil,
stamping oil, iron filings,
polishing materials, wanut
powder, polishing wax, resin,
dust etc
Precision
machine
Bearing, sewing machine parts, typewriter, textile machine, optical
mechanical device, gas valve, watches, cameras, metal filter
element,etc.
Machine cutting oil,iron filngs,
polishing powder, finger print
oil, grease, dirt etc.
Optical
device
Glasses, lens prism, optical lens, filter lens, glass device, film, optical
fiber, etc.
Plastic, resin, paraffin, finger
printing, etc
Hardware &
machinery
parts
Bearing, gear,bal, metal shaft parts, tools, adjustable valve, and
cylinder parts,burner,copm pressors,hydraulic press, gun and
ultracentrifuge, city water faucet, etc.
Cutting oil, iron filings,grease
polishing powder, finger
printing, and so on.
Medical
instrumentMedical instrument, denture, etc.Iron filings,polishing powder,
oil, stamping oil, dirt,etc.
The cleaning products materials Cleardirt
Electroplate Galvanized parts,mold,stamping parts,etc.
Car parts Iron filings,polishing powder,oil,
stamping oil,dirt,etc
Poston ring,carburetor,flow meter housing,compressor shell,electrical
components,etc
Chemical
fiber
Chemical colloid,glue,and other
solid material,dust,etc
Chemical or artificial fiber nozzle filter protector,chemical fiber texture,etc
Polishing scrap iron,oil,black
iron shell,rust,oxidation shell,
scrap iron,polishing powder,
stamping oil,dirt etc
www.skymen.cc

Donot operate when
tank is empty
Donot use flammable
solution
Caution pollution when
disposal this product.
Please use the ground
wire correctly
WARNINGS
Regularly use high-pressure wind blown away dust for electrical parts Clean the tank at least
once a week
Maintenance
Troubleshooting
No Problems
No
Ultrasonic
Time control
failure
A.Timer failure
B.other reasons
Electricleakage
Scrap
A.The equipment ground wire is not
connected well.
A.Check whether the internal ground wire and power cable
grounding of the device are connected.
B.Check if the internal live wire or neutral wire of the
machine is fall off.
According tothe state related laws and designated
units for discarded medical equipment
B.The internal live line or neutral line
of the equipment falls off
A.Replace timer or digital control panel
B.Inquiry our after service engineer
Not well
cleaning
A.too high too low liquid surface
B.too high too low temperature
C.Not suitable cleaning liquid
D.Other reasons
A.Adjust liquid into the best surface
B.Adjust temperature into the most fitted
C.Stop and switch off power supply,replace
suitable liquid after the previous liquid cool down
D.Inquiry our after service engineer
Temperature
control
failure
A.Thermostant loosen
B.Thermostat tube broken
C.Digital display out of control
D.Other reasons
A.Fasten the thermostat header.
B.Replace thermostat.
C.Check the broken part and change it.
D.Inquiry our after service engineer
No heatingSuggestion
50-60°C
Suggestion
50-60°C
A.Heater power switch bad
linkage
B.Fuse burn out
C.Heating pad burn out
D.Digital display board out of
control
E.Incorrect temperature setting
A.Check heating plug and connect well.check
outlet line with multimeter:if OK and resistance
value is few hundred OHMs.
B.Change the same specification fuse
C.Replace the bad heating pad if open circuit
D.Check the broken part and change it
E.The set temperature must be 3°C higher than
the actual temperature before heating can be
turned on. Please reset the temperature.
F.Other reasonsF.Inquiry our after service engineer
A.Power supply not connect
B.Fuse broken
C.Cable short circult
D.Transducer short circult
E.PCB Board broken
F.Other reasons
A.Check and plug power switch
B.Check the fitted power supply and change the
same specification fuse
C.Connect fitted cable or replace a new
D.Inquiry our after service engineer
E.Check the broken part and change it
F.Inquiry our after service engineer
Possible causes Solutions Remarks
1
2
3
4
5
6
7
Other problems Consult our after service：[phone]
www.skymen.cc

MAINTENANCE CARD
Ultrasonic cleaner
Maintenance care records
EX factory date:
Machine number:
Work voltage
Work current
Rated power
01
02
03
04
05
06
07
08
09
10
11
12
Maintenance care solution replacement part contact person
Please contact supplier if trouble cannot be removed！
www.skymen.cc

It is sorry to that the design and specification of our products are subject tochange without
notice.
All information in this manual has been carefully proofread and made every effort to be
accurate. We reserve the right to interpret any printing mistakes.
The copyright of this manual belongs to Skymen Cleaning Equipment Shenzhen Co., Ltd.
No copy or reprint is strictly prohibited without written authorization. The company will
pursue its legal responsibility.
Solemnly Declare
Please scan the code
for instructions
Tel:[phone] FAX: [phone]
Email: [email protected] Website: www.skymen.cc
Production address: Skymen Ultrasonic,Wujiang Technology Industrial
Park, Wujiang District,Shaoguan City,Guangdong, China
Operation center: 3F, A1 Block, Fuhai Technology Park Building,
FuYong Steet, Baoan district, Shenzhen, Guangdong, China.
Skymen Cleaning Equipemnt Shenzhen Co., LTD